diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -54,17 +54,17 @@ &Delete - + Choose the address to send coins to - + Choose the address to receive coins with - + C&hoose @@ -74,22 +74,22 @@ - + Receiving addresses - + These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. - + These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. - + &Copy Address @@ -104,7 +104,7 @@ - + Export Address List @@ -114,7 +114,7 @@ - + Exporting Failed @@ -127,7 +127,7 @@ AddressTableModel - + Label @@ -137,7 +137,7 @@ - + (no label) @@ -165,12 +165,12 @@ Repeat new passphrase - + Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>. - + Encrypt wallet @@ -180,7 +180,7 @@ - + Unlock wallet @@ -190,7 +190,7 @@ - + Decrypt wallet @@ -215,12 +215,12 @@ - + Are you sure you wish to encrypt your wallet? - + Wallet encrypted @@ -231,53 +231,53 @@ - + IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. - + - + Wallet encryption failed - + Wallet encryption failed due to an internal error. Your wallet was not encrypted. - + The supplied passphrases do not match. - + Wallet unlock failed - - + + The passphrase entered for the wallet decryption was incorrect. - + Wallet decryption failed - + Wallet passphrase was successfully changed. - + Warning: The Caps Lock key is on! @@ -286,7 +286,7 @@ BanTableModel - + IP/Netmask @@ -299,32 +299,37 @@ BitcoinGUI - + Sign &message... Sign &message... - + Synchronizing with network... Synchronizing with network... - + &Overview &Overview - + Node - + Show general overview of wallet Show general overview of wallet - + + Request payments (generates QR codes and %1: URIs) + + + + &Transactions &Transactions @@ -334,7 +339,7 @@ Browse transaction history - + E&xit E&xit @@ -344,17 +349,17 @@ Quit application - + &About %1 - + Show information about %1 - + About &Qt About &Qt @@ -364,47 +369,57 @@ Show information about Qt - + &Options... &Options... - + Modify configuration options for %1 - + &Encrypt Wallet... &Encrypt Wallet... - + &Backup Wallet... &Backup Wallet... - + &Change Passphrase... &Change Passphrase... - + &Sending addresses... - + &Receiving addresses... - + Open &URI... - + + Open a %1: URI or payment request + + + + + Wallet: + + + + Click to disable network activity. @@ -414,7 +429,7 @@ - + Click to enable network activity again. @@ -424,62 +439,62 @@ - + Reindexing blocks on disk... Reindexing blocks on disk... - + Send coins to a Bitcoin address Send coins to a Bitcoin address - + Backup wallet to another location Backup wallet to another location - + Change the passphrase used for wallet encryption Change the passphrase used for wallet encryption - + &Debug window &Debug window - + Open debugging and diagnostic console Open debugging and diagnostic console - + &Verify message... &Verify message... - + Bitcoin Bitcoin - + Wallet Wallet - + &Send &Send - + &Receive &Receive - + &Show / Hide &Show / Hide @@ -489,67 +504,57 @@ Show or hide the main Window - + Encrypt the private keys that belong to your wallet Encrypt the private keys that belong to your wallet - + Sign messages with your Bitcoin addresses to prove you own them Sign messages with your Bitcoin addresses to prove you own them - + Verify messages to ensure they were signed with specified Bitcoin addresses Verify messages to ensure they were signed with specified Bitcoin addresses - + &File &File - + &Settings &Settings - + &Help &Help - + Tabs toolbar Tabs toolbar - - Request payments (generates QR codes and %1 URIs) - - - - + Show the list of used sending addresses and labels - + Show the list of used receiving addresses and labels - - Open a %1 URI or payment request - - - - + &Command-line options - + %n active connection(s) to Bitcoin network %n active connection to Bitcoin network @@ -557,7 +562,7 @@ - + Indexing blocks on disk... @@ -575,12 +580,12 @@ - + %1 behind %1 behind - + Last received block was generated %1 ago. Last received block was generated %1 ago. @@ -610,27 +615,27 @@ Up to date - + Show the %1 help message to get a list with possible Bitcoin command-line options - + %1 client - + Connecting to peers... - + Catching up... Catching up... - + Date: %1 @@ -642,7 +647,13 @@ - + + Wallet: %1 + + + + + Type: %1 @@ -660,37 +671,37 @@ - + Sent transaction Sent transaction - + Incoming transaction Incoming transaction - + HD key generation is <b>enabled</b> - + HD key generation is <b>disabled</b> - + Wallet is <b>encrypted</b> and currently <b>unlocked</b> Wallet is <b>encrypted</b> and currently <b>unlocked</b> - + Wallet is <b>encrypted</b> and currently <b>locked</b> Wallet is <b>encrypted</b> and currently <b>locked</b> - + A fatal error occurred. Bitcoin can no longer continue safely and will quit. @@ -783,7 +794,7 @@ Confirmed - + Copy address @@ -794,27 +805,27 @@ - + Copy amount - + Copy transaction ID - + Lock unspent - + Unlock unspent - + Copy quantity @@ -844,12 +855,12 @@ - + (%1 locked) - + yes @@ -859,28 +870,28 @@ - + This label turns red if any recipient receives an amount smaller than the current dust threshold. - + Can vary +/- %1 satoshi(s) per input. - - + + (no label) - + change from %1 (%2) - + (change) @@ -913,7 +924,7 @@ &Address - + New receiving address @@ -933,17 +944,17 @@ - + The entered address "%1" is not a valid Bitcoin address. - + The entered address "%1" is already in the address book. - + Could not unlock wallet. @@ -961,7 +972,7 @@ A new data directory will be created. - + name name @@ -971,12 +982,12 @@ Directory already exists. Add %1 if you intend to create a new directory here. - + Path already exists, and is not a directory. Path already exists, and is not a directory. - + Cannot create data directory here. Cannot create data directory here. @@ -984,18 +995,18 @@ HelpMessageDialog - + version version - + (%1-bit) - + About %1 @@ -1015,37 +1026,37 @@ command-line options - + UI Options: - - Choose data directory on startup (default: %u) + + Choose data directory on startup (default: %d) - - Set language, for example "de_DE" (default: system locale) + + Show splash screen on startup (default: %d) - - Start minimized + + Set language, for example "de_DE" (default: system locale) - - Set SSL root certificates for payment request (default: -system-) + + Start minimized - - Show splash screen on startup (default: %u) + + Set SSL root certificates for payment request (default: -system-) - + Reset all settings changed in the GUI @@ -1083,12 +1094,12 @@ Use a custom data directory: - + Error: Specified data directory "%1" cannot be created. - + Error Error @@ -1101,7 +1112,7 @@ - + (of %n GB needed) (of %n GB needed) @@ -1134,7 +1145,7 @@ - + Unknown... @@ -1198,7 +1209,7 @@ - + Select payment request file to open @@ -1468,38 +1479,38 @@ &Cancel - + default default - + none - + Confirm options reset Confirm options reset - + Client restart required to activate changes. - + Client will be shut down. Do you want to proceed? - + This change would require a client restart. - + The supplied proxy address is invalid. The supplied proxy address is invalid. @@ -1601,34 +1612,34 @@ PaymentServer - - - - - - + + + + + + Payment request error - - Cannot start %1 click-to-pay handler + + Cannot start click-to-pay handler - - - + + + URI handling - + Payment request fetch URL is invalid: %1 - + Invalid payment address %1 @@ -1638,7 +1649,7 @@ - + Payment request file handling @@ -1648,53 +1659,53 @@ - - - - - - + + + + + + Payment request rejected - + Payment request network doesn't match client network. - + Payment request expired. - + Payment request is not initialized. - + Unverified payment requests to custom payment scripts are unsupported. - - + + Invalid payment request. - + Requested payment amount of %1 is too small (considered dust). - + Refund from %1 - + Payment request %1 is too large (%2 bytes, allowed %3 bytes). @@ -1704,22 +1715,22 @@ - + Payment request cannot be parsed! - + Bad response from server %1 - + Network request error - + Payment acknowledged @@ -1727,7 +1738,7 @@ PeerTableModel - + User Agent @@ -1742,7 +1753,7 @@ - + Ping @@ -1750,48 +1761,48 @@ QObject - + Amount Amount - + Enter a Bitcoin address (e.g. %1) - + %1 d - + %1 h - + %1 m - - + + %1 s - + None - + N/A N/A - + %1 ms @@ -1804,7 +1815,7 @@ - + %n minute(s) %n minute @@ -1812,7 +1823,7 @@ - + %n hour(s) %n hour @@ -1820,7 +1831,7 @@ - + %n day(s) %n day @@ -1828,7 +1839,7 @@ - + %n week(s) @@ -1837,12 +1848,12 @@ - + %1 and %2 - + %n year(s) %n year @@ -1850,7 +1861,7 @@ - + %1 didn't yet exit safely... @@ -1858,17 +1869,17 @@ QObject::QObject - + Error: Specified data directory "%1" does not exist. - + Error: Cannot parse configuration file: %1. Only use key=value syntax. - + Error: %1 @@ -1876,7 +1887,7 @@ QRImageWidget - + &Save Image... @@ -1886,12 +1897,12 @@ - + Save QR Code - + PNG Image (*.png) @@ -1910,7 +1921,7 @@ - + @@ -1932,7 +1943,7 @@ N/A - + Client version Client version @@ -2007,7 +2018,17 @@ - + + Wallet: + + + + + (none) + + + + Received @@ -2030,8 +2051,8 @@ - - + + Select a peer to view detailed information. @@ -2066,18 +2087,18 @@ - - + + User Agent - + Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. - + Decrease font size @@ -2137,7 +2158,7 @@ - + Last block time Last block time @@ -2152,7 +2173,7 @@ &Console - + &Network Traffic @@ -2167,105 +2188,120 @@ - + In: - + Out: - + Debug log file Debug log file - + Clear console Clear console - + 1 &hour - + 1 &day - + 1 &week - + 1 &year - + &Disconnect - - - - + + + + Ban for - + &Unban - + Welcome to the %1 RPC console. - - Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen. - Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen. + + Use up and down arrows to navigate history, and %1 to clear screen. + - - Type <b>help</b> for an overview of available commands. - Type <b>help</b> for an overview of available commands. + + Type %1 for an overview of available commands. + - + + For more information on using this console type %1. + + + + WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramification of a command. - + Network activity disabled - + + Executing command without any wallet + + + + + Executing command using "%1" wallet + + + + %1 B - + %1 KB - + %1 MB - + %1 GB @@ -2280,34 +2316,34 @@ - - + + never - + Inbound - + Outbound - + Yes - + No - - + + Unknown @@ -2403,7 +2439,7 @@ - + Copy URI @@ -2446,7 +2482,7 @@ - + Request payment to %1 @@ -2466,27 +2502,32 @@ - + Amount Amount - + Label - + Message - + + Wallet + Wallet + + + Resulting URI too long, try to reduce the text for label / message. - + Error encoding URI into QR Code. @@ -2494,7 +2535,7 @@ RecentRequestsTableModel - + Date Date @@ -2509,22 +2550,22 @@ - + (no label) - + (no message) - + (no amount requested) - + Requested @@ -2533,7 +2574,7 @@ SendCoinsDialog - + Send Coins Send Coins @@ -2619,22 +2660,16 @@ - If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. - + Hide - - total at least - - - - + Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. @@ -2660,17 +2695,7 @@ - - normal - - - - - fast - - - - + Send to multiple recipients at once Send to multiple recipients at once @@ -2685,17 +2710,12 @@ - + Dust: - - Confirmation time target: - - - - + Clear &All Clear &All @@ -2715,7 +2735,7 @@ S&end - + Copy quantity @@ -2750,10 +2770,15 @@ - + + from wallet %1 + + + + + - %1 to %2 @@ -2768,22 +2793,22 @@ - + Total Amount %1 - + or - + Confirm send coins - + The recipient address is not valid. Please recheck. @@ -2803,45 +2828,37 @@ - + Duplicate address found: addresses should only be used once each. - + Transaction creation failed! - + The transaction was rejected with the following reason: %1 - + A fee higher than %1 is considered an absurdly high fee. - + Payment request expired. - - - %n block(s) - - %n block - %n blocks - - - + Pay only the required fee of %1 - + Estimated to begin confirmation within %n block(s). Estimated to begin confirmation within %n block. @@ -2849,27 +2866,27 @@ - + Warning: Invalid Bitcoin address - + Warning: Unknown change address - + Confirm custom change address - + The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? - + (no label) @@ -2878,13 +2895,13 @@ SendCoinsEntry - + A&mount: A&mount: - + Pay &To: Pay &To: @@ -2925,13 +2942,13 @@ - + Remove this entry - + The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. @@ -2940,6 +2957,11 @@ S&ubtract fee from amount + + + Use available balance + + Message: @@ -2956,17 +2978,17 @@ - + Enter a label for this address to add it to the list of used addresses - + A message that was attached to the %1 URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. - + Pay To: @@ -2978,7 +3000,7 @@ - + Enter a label for this address to add it to your address book @@ -2986,8 +3008,8 @@ SendConfirmationDialog - - + + Yes @@ -2995,7 +3017,7 @@ ShutdownWindow - + %1 is shutting down... @@ -3116,32 +3138,32 @@ Reset all verify message fields - + Click "Sign Message" to generate signature - + The entered address is invalid. - - - + + + Please check the address and try again. - + The entered address does not refer to a key. - + Wallet unlock was cancelled. @@ -3156,7 +3178,7 @@ - + Message signed. @@ -3166,23 +3188,23 @@ - - + + Please check the signature and try again. - + The signature did not match the message digest. - + Message verification failed. - + Message verified. @@ -3198,7 +3220,7 @@ TrafficGraphWidget - + KB/s @@ -3206,7 +3228,7 @@ TransactionDesc - + Open for %n more block(s) Open for %n more block @@ -3214,7 +3236,7 @@ - + Open until %1 @@ -3224,7 +3246,7 @@ - + %1/offline @@ -3234,17 +3256,17 @@ - + in memory pool - + not in memory pool - + abandoned @@ -3259,12 +3281,12 @@ - + Status - + , has not been successfully broadcast yet @@ -3277,7 +3299,7 @@ - + Date Date @@ -3292,51 +3314,51 @@ - - - + + + From - + unknown - - + + To - + own address - - + + watch-only - + label - - - - - + + + + + Credit - + matures in %n more block(s) matures in %n more block @@ -3344,50 +3366,50 @@ - + not accepted - - - + + + Debit - + Total debit - + Total credit - + Transaction fee - + Net amount - - + + Message - + Comment - + Transaction ID @@ -3397,27 +3419,27 @@ - + Output index - + Merchant - + Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. - + Debug information - + Transaction @@ -3432,14 +3454,14 @@ Amount - - + + true - - + + false @@ -3460,7 +3482,7 @@ TransactionTableModel - + Date Date @@ -3475,7 +3497,7 @@ - + Open for %n more block(s) Open for %n more block @@ -3488,7 +3510,7 @@ - + Offline @@ -3508,7 +3530,7 @@ - + Confirmed (%1 confirmations) @@ -3518,22 +3540,22 @@ - + Immature (%1 confirmations, will be available after %2) - + This block was not received by any other nodes and will probably not be accepted! - + Generated but not accepted - + Received with @@ -3558,7 +3580,7 @@ - + watch-only @@ -3568,22 +3590,22 @@ - + (no label) - + Transaction status. Hover over this field to show number of confirmations. - + Date and time that the transaction was received. - + Type of transaction. @@ -3593,12 +3615,12 @@ - + User-defined intent/purpose of the transaction. - + Amount removed from or added to balance. @@ -3606,7 +3628,7 @@ TransactionView - + All @@ -3642,27 +3664,27 @@ - + Received with - + Sent to - + To yourself - + Mined - + Other @@ -3672,12 +3694,12 @@ - + Min amount - + Abandon transaction @@ -3707,7 +3729,7 @@ - + Copy full transaction details @@ -3717,12 +3739,12 @@ - + Show transaction details - + Export Transaction History @@ -3732,7 +3754,7 @@ - + Confirmed Confirmed @@ -3742,7 +3764,7 @@ - + Date Date @@ -3762,7 +3784,7 @@ - + ID @@ -3772,22 +3794,22 @@ - + There was an error trying to save the transaction history to %1. - + Exporting Successful - + The transaction history was successfully saved to %1. - + Range: @@ -3800,7 +3822,7 @@ UnitDisplayStatusBarControl - + Unit to show amounts in. Click to select another unit. @@ -3816,7 +3838,7 @@ WalletModel - + Send Coins Send Coins @@ -3824,17 +3846,17 @@ WalletView - + &Export &Export - + Export the data in the current tab to a file Export the data in the current tab to a file - + Backup Wallet @@ -3844,22 +3866,22 @@ - + Backup Failed - + There was an error trying to save the wallet data to %1. - + Backup Successful - + The wallet data was successfully saved to %1. @@ -3867,92 +3889,92 @@ bitcoin-abc - + Options: Options: - + Specify data directory Specify data directory - + Connect to a node to retrieve peer addresses, and disconnect Connect to a node to retrieve peer addresses, and disconnect - + Specify your own public address Specify your own public address - + Accept command line and JSON-RPC commands Accept command line and JSON-RPC commands - + Accept connections from outside (default: 1 if no -proxy or -connect/-noconnect) - + Connect only to the specified node(s); -noconnect or -connect=0 alone to disable automatic connections - + Distributed under the MIT software license, see the accompanying file %s or %s - + If <category> is not supplied or if <category> = 1, output all debugging information. - + Prune configured below the minimum of %d MiB. Please use a higher number. - + Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) - + Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again. - + Error: A fatal internal error occurred, see debug.log for details - + Fee (in %s/kB) to add to transactions you send (default: %s) - + Pruning blockstore... - + Run in the background as a daemon and accept commands Run in the background as a daemon and accept commands - + Unable to start HTTP server. See debug log for details. - + Bitcoin ABC Bitcoin ABC @@ -3962,137 +3984,137 @@ - + A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s) - + Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d) - + Bind to given address and always listen on it. Use [host]:port notation for IPv6 Bind to given address and always listen on it. Use [host]:port notation for IPv6 - + Cannot obtain a lock on data directory %s. %s is probably already running. - + Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup - + Error loading %s: You can't enable HD on a already existing non-HD wallet - + Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. - + Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) - + Extra transactions to keep in memory for compact block reconstructions (default: %u) - + If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s) - + Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds) - + Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s) - + Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. - + Please contribute if you find %s useful. Visit %s for further information about the software. - + Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB) - + Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s) - + Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) - + The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct - + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications - + Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain - + Use UPnP to map the listening port (default: 1 when listening and no -proxy) - + Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times - + Wallet will not create transactions that violate mempool chain limits (default: %u) - + Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. - + Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. - + You need to rebuild the database using -reindex-chainstate to change -txindex - + %s corrupt, salvage failed @@ -4107,7 +4129,7 @@ - + Append comment to the user agent string @@ -4117,7 +4139,7 @@ - + Block creation options: Block creation options: @@ -4137,7 +4159,7 @@ - + Connection options: @@ -4162,12 +4184,12 @@ - + Do you want to rebuild the block database now? Do you want to rebuild the block database now? - + Enable publish hash block in <address> @@ -4177,7 +4199,7 @@ - + Enable publish raw block in <address> @@ -4187,12 +4209,12 @@ - + Enable transaction replacement in the memory pool (default: %u) - + Error initializing block database Error initializing block database @@ -4202,7 +4224,7 @@ Error initializing wallet database environment %s! - + Error loading %s @@ -4217,12 +4239,12 @@ - + Error loading %s: You can't disable HD on a already existing HD wallet - + Error loading block database Error loading block database @@ -4232,7 +4254,7 @@ Error opening block database - + Error: Disk space is low! Error: Disk space is low! @@ -4242,22 +4264,22 @@ Failed to listen on any port. Use -listen=0 if you want this. - + Importing... - + Incorrect or no genesis block found. Wrong datadir for network? Incorrect or no genesis block found. Wrong datadir for network? - + Initialization sanity check failed. %s is shutting down. - + Invalid -onion address: '%s' @@ -4272,12 +4294,12 @@ - + Keep the transaction memory pool below <n> megabytes (default: %u) - + Loading banlist... @@ -4287,7 +4309,7 @@ - + Not enough file descriptors available. Not enough file descriptors available. @@ -4297,7 +4319,7 @@ - + Print this help message and exit @@ -4312,72 +4334,72 @@ - + Prune mode is incompatible with -txindex. - + Rebuild chain state and block index from the blk*.dat files on disk - + Rebuild chain state from the currently indexed blocks - + Rewinding blocks... - + Set database cache size in megabytes (%d to %d, default: %d) - + Set maximum block size in bytes (default: %d) - + Specify wallet file (within data directory) Specify wallet file (within data directory) - + The source code is available from %s. - + Unable to bind to %s on this computer. %s is probably already running. - + Unsupported argument -benchmark ignored, use -debug=bench. - + Unsupported argument -debugnet ignored, use -debug=net. - + Unsupported argument -tor found, use -onion. - + Use UPnP to map the listening port (default: %u) - + Use the test chain @@ -4387,7 +4409,7 @@ - + Verifying blocks... Verifying blocks... @@ -4402,7 +4424,7 @@ Wallet %s resides outside data directory %s - + Wallet debugging/testing options: @@ -4412,222 +4434,222 @@ - + Wallet options: - + Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times - + Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 - + Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces) - + Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) - + Discover own IP addresses (default: 1 when listening and no -externalip or -proxy) - + Error: Listening for incoming connections failed (listen returned error %s) - + Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) - + Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s) - + If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u) - + Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) - + Maximum size of data in data carrier transactions we relay and mine (default: %u) - + Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u) - + Set maximum size of high-priority/low-fee transactions in bytes (default: %d) - + The transaction amount is too small to send after the fee has been deducted - + Use hierarchical deterministic key generation (HD) after BIP32. Only has effect during wallet creation/first start - + Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway - + You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain - + (default: %u) - + Accept public REST requests (default: %u) - + Automatically create Tor hidden service (default: %d) - + Connect through SOCKS5 proxy - + Error reading from database, shutting down. - + Imports blocks from external blk000??.dat file on startup - + Information Information - + Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) - + Invalid netmask specified in -whitelist: '%s' - + Keep at most <n> unconnectable transactions in memory (default: %u) - + Need to specify a port with -whitebind: '%s' - + Node relay options: - + RPC server options: - + Reducing -maxconnections from %d to %d, because of system limitations. - + Rescan the block chain for missing wallet transactions on startup - + Send trace/debug info to console instead of debug.log file Send trace/debug info to console instead of debug.log file - + Send transactions as zero-fee transactions if possible (default: %u) - + Show all debugging options (usage: --help -help-debug) - + Shrink debug.log file on client startup (default: 1 when no -debug) Shrink debug.log file on client startup (default: 1 when no -debug) - + Signing transaction failed Signing transaction failed - + The transaction amount is too small to pay the fee - + This is experimental software. - + Tor control port password (default: empty) - + Tor control port to use if onion listening enabled (default: %s) - + Transaction amount too small Transaction amount too small - + Transaction too large for fee policy @@ -4642,17 +4664,17 @@ - + Upgrade wallet to latest format on startup - + Username for JSON-RPC connections Username for JSON-RPC connections - + Warning Warning @@ -4662,7 +4684,7 @@ - + Zapping all transactions from wallet... @@ -4672,142 +4694,142 @@ - + Password for JSON-RPC connections Password for JSON-RPC connections - + Execute command when the best block changes (%s in cmd is replaced by block hash) Execute command when the best block changes (%s in cmd is replaced by block hash) - + Allow DNS lookups for -addnode, -seednode and -connect Allow DNS lookups for -addnode, -seednode and -connect - + Loading addresses... Loading addresses... - + (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) - + -maxtxfee is set very high! Fees this large could be paid on a single transaction. - + Do not keep transactions in the mempool longer than <n> hours (default: %u) - + Equivalent bytes per sigop in transactions for relay and mining (default: %u) - + Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s) - + Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d) - + How thorough the block verification of -checkblocks is (0-4, default: %u) - + Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u) - + Number of seconds to keep misbehaving peers from reconnecting (default: %u) - + Output debugging information (default: %u, supplying <category> is optional) - + Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect/-noconnect) - + Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d) - + Support filtering of blocks and transaction with bloom filters (default: %u) - + This is the transaction fee you may pay when fee estimates are not available. - + This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. - + Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. - + Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d) - + Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported. - + Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay. - + Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s) - + Warning: Unknown block versions being mined! It's possible unknown rules are in effect - + Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup. - + Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times. - + %s is set very high! @@ -4817,47 +4839,47 @@ - + Always query for peer addresses via DNS lookup (default: %u) - + How many blocks to check at startup (default: %u, 0 = all) - + Include IP addresses in debug output (default: %u) - + Invalid -proxy address: '%s' Invalid -proxy address: '%s' - + Keypool ran out, please call keypoolrefill first - + Listen for JSON-RPC connections on <port> (default: %u or testnet: %u) - + Listen for connections on <port> (default: %u or testnet: %u) - + Maintain at most <n> connections to peers (default: %u) - + Make the wallet broadcast transactions @@ -4867,127 +4889,122 @@ - + Maximum per-connection send buffer, <n>*1000 bytes (default: %u) - + Prepend debug output with timestamp (default: %u) - + Relay and mine data carrier transactions (default: %u) - + Relay non-P2SH multisig (default: %u) - + Set key pool size to <n> (default: %u) - - Set maximum BIP141 block weight (default: %d) - - - - + Set the number of threads to service RPC calls (default: %d) - + Specify configuration file (default: %s) - + Specify connection timeout in milliseconds (minimum: 1, default: %d) - + Specify pid file (default: %s) - + Spend unconfirmed change when sending transactions (default: %u) - + Starting network threads... - + The wallet will avoid paying less than the minimum relay fee. - + This is the minimum transaction fee you pay on every transaction. - + This is the transaction fee you will pay if you send a transaction. - + Threshold for disconnecting misbehaving peers (default: %u) - + Transaction amounts must not be negative - + Transaction has too long of a mempool chain - + Transaction must have at least one recipient - + Unknown network specified in -onlynet: '%s' Unknown network specified in -onlynet: '%s' - + Insufficient funds Insufficient funds - + Loading block index... Loading block index... - + Add a node to connect to and attempt to keep the connection open Add a node to connect to and attempt to keep the connection open - + Loading wallet... Loading wallet... - + Cannot downgrade wallet Cannot downgrade wallet @@ -4997,17 +5014,17 @@ Cannot write default address - + Rescanning... Rescanning... - + Done loading Done loading - + Error Error