Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.</source>
<translation>
This is experimental software.
Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.</translation>
<source>Double-click to edit address or label</source>
<translation>Double-click to edit address or label</translation>
</message>
<message>
<location line="+27"/>
<source>Create a new address</source>
<translation>Create a new address</translation>
</message>
<message>
<location line="+14"/>
<source>Copy the currently selected address to the system clipboard</source>
<translation>Copy the currently selected address to the system clipboard</translation>
</message>
<message>
<location line="-11"/>
<source>&New Address</source>
<translation>&New Address</translation>
</message>
<message>
<location line="-46"/>
<source>These are your Bitcoin addresses for receiving payments. You may want to give a different one to each sender so you can keep track of who is paying you.</source>
<translation>These are your Bitcoin addresses for receiving payments. You may want to give a different one to each sender so you can keep track of who is paying you.</translation>
</message>
<message>
<location line="+60"/>
<source>&Copy Address</source>
<translation>&Copy Address</translation>
</message>
<message>
<location line="+11"/>
<source>Show &QR Code</source>
<translation>Show &QR Code</translation>
</message>
<message>
<location line="+11"/>
<source>Sign a message to prove you own a Bitcoin address</source>
<translation>Sign a message to prove you own a Bitcoin address</translation>
</message>
<message>
<location line="+3"/>
<source>Sign &Message</source>
<translation>Sign &Message</translation>
</message>
<message>
<location line="+25"/>
<source>Delete the currently selected address from the list</source>
<translation>Delete the currently selected address from the list</translation>
</message>
<message>
<location line="-14"/>
<source>Verify a message to ensure it was signed with a specified Bitcoin address</source>
<translation>Verify a message to ensure it was signed with a specified Bitcoin address</translation>
<source>Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>.</source>
<translation>Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>.</translation>
</message>
<message>
<location line="+1"/>
<source>Encrypt wallet</source>
<translation>Encrypt wallet</translation>
</message>
<message>
<location line="+3"/>
<source>This operation needs your wallet passphrase to unlock the wallet.</source>
<translation>This operation needs your wallet passphrase to unlock the wallet.</translation>
</message>
<message>
<location line="+5"/>
<source>Unlock wallet</source>
<translation>Unlock wallet</translation>
</message>
<message>
<location line="+3"/>
<source>This operation needs your wallet passphrase to decrypt the wallet.</source>
<translation>This operation needs your wallet passphrase to decrypt the wallet.</translation>
</message>
<message>
<location line="+5"/>
<source>Decrypt wallet</source>
<translation>Decrypt wallet</translation>
</message>
<message>
<location line="+3"/>
<source>Change passphrase</source>
<translation>Change passphrase</translation>
</message>
<message>
<location line="+1"/>
<source>Enter the old and new passphrase to the wallet.</source>
<translation>Enter the old and new passphrase to the wallet.</translation>
<source>Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!</source>
<translation>Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!</translation>
</message>
<message>
<location line="+0"/>
<source>Are you sure you wish to encrypt your wallet?</source>
<translation>Are you sure you wish to encrypt your wallet?</translation>
</message>
<message>
<location line="+15"/>
<source>IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.</source>
<translation>IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.</translation>
</message>
<message>
<location line="+100"/>
<location line="+24"/>
<source>Warning: The Caps Lock key is on!</source>
<translation>Warning: The Caps Lock key is on!</translation>
</message>
<message>
<location line="-130"/>
<location line="+58"/>
<source>Wallet encrypted</source>
<translation>Wallet encrypted</translation>
</message>
<message>
<location line="-56"/>
<source>Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</source>
<translation>Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</translation>
<translation>Importing blocks from disk...</translation>
</message>
<message>
<location line="+3"/>
<source>Reindexing blocks on disk...</source>
<translation>Reindexing blocks on disk...</translation>
</message>
<message numerus="yes">
<location line="+10"/>
<source>~%n block(s) remaining</source>
<translation>
<numerusform>~%n block remaining</numerusform>
<numerusform>~%n blocks remaining</numerusform>
</translation>
</message>
<message>
<location line="-265"/>
<source>&Export...</source>
<translation>&Export...</translation>
</message>
<message>
<location line="-65"/>
<source>Send coins to a Bitcoin address</source>
<translation>Send coins to a Bitcoin address</translation>
</message>
<message>
<location line="+49"/>
<source>Modify configuration options for Bitcoin</source>
<translation>Modify configuration options for Bitcoin</translation>
</message>
<message>
<location line="+17"/>
<source>Export the data in the current tab to a file</source>
<translation>Export the data in the current tab to a file</translation>
</message>
<message>
<location line="-9"/>
<source>Backup wallet to another location</source>
<translation>Backup wallet to another location</translation>
</message>
<message>
<location line="+2"/>
<source>Change the passphrase used for wallet encryption</source>
<translation>Change the passphrase used for wallet encryption</translation>
</message>
<message>
<location line="+9"/>
<source>&Debug window</source>
<translation>&Debug window</translation>
</message>
<message>
<location line="+1"/>
<source>Open debugging and diagnostic console</source>
<translation>Open debugging and diagnostic console</translation>
</message>
<message>
<location line="-7"/>
<source>&Verify message...</source>
<translation>&Verify message...</translation>
</message>
<message>
<location line="-196"/>
<location line="+538"/>
<source>Bitcoin</source>
<translation>Bitcoin</translation>
</message>
<message>
<location line="-538"/>
<source>Wallet</source>
<translation>Wallet</translation>
</message>
<message>
<location line="+176"/>
<source>&About Bitcoin</source>
<translation>&About Bitcoin</translation>
</message>
<message>
<location line="+9"/>
<source>&Show / Hide</source>
<translation>&Show / Hide</translation>
</message>
<message>
<location line="+1"/>
<source>Show or hide the main Window</source>
<translation>Show or hide the main Window</translation>
</message>
<message>
<location line="+2"/>
<source>Encrypt the private keys that belong to your wallet</source>
<translation>Encrypt the private keys that belong to your wallet</translation>
</message>
<message>
<location line="+7"/>
<source>Sign messages with your Bitcoin addresses to prove you own them</source>
<translation>Sign messages with your Bitcoin addresses to prove you own them</translation>
</message>
<message>
<location line="+2"/>
<source>Verify messages to ensure they were signed with specified Bitcoin addresses</source>
<translation>Verify messages to ensure they were signed with specified Bitcoin addresses</translation>
</message>
<message>
<location line="+31"/>
<source>&File</source>
<translation>&File</translation>
</message>
<message>
<location line="+8"/>
<source>&Settings</source>
<translation>&Settings</translation>
</message>
<message>
<location line="+6"/>
<source>&Help</source>
<translation>&Help</translation>
</message>
<message>
<location line="+9"/>
<source>Tabs toolbar</source>
<translation>Tabs toolbar</translation>
</message>
<message>
<location line="+8"/>
<source>Actions toolbar</source>
<translation>Actions toolbar</translation>
</message>
<message>
<location line="+13"/>
<location line="+10"/>
<source>[testnet]</source>
<translation>[testnet]</translation>
</message>
<message>
<location line="+63"/>
<source>Bitcoin client</source>
<translation>Bitcoin client</translation>
</message>
<message numerus="yes">
<location line="+79"/>
<source>%n active connection(s) to Bitcoin network</source>
<translation>
<numerusform>%n active connection to Bitcoin network</numerusform>
<numerusform>%n active connections to Bitcoin network</numerusform>
</translation>
</message>
<message>
<location line="+45"/>
<source>Processed %1 of %2 blocks of transaction history (%3% done).</source>
<translation>Processed %1 of %2 blocks of transaction history (%3% done).</translation>
</message>
<message>
<location line="+7"/>
<source>Processed %1 blocks of transaction history.</source>
<translation>Processed %1 blocks of transaction history.</translation>
</message>
<message>
<location line="+70"/>
<source>Error</source>
<translation>Error</translation>
</message>
<message>
<location line="+3"/>
<source>Warning</source>
<translation>Warning</translation>
</message>
<message>
<location line="+3"/>
<source>Information</source>
<translation>Information</translation>
</message>
<message>
<location line="+66"/>
<source>This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?</source>
<translation>This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?</translation>
</message>
<message>
<location line="+210"/>
<source>Backup Successful</source>
<translation>Backup Successful</translation>
</message>
<message>
<location line="+0"/>
<source>The wallet data was successfully saved to the new location.</source>
<translation>The wallet data was successfully saved to the new location.</translation>
</message>
<message numerus="yes">
<location line="-338"/>
<source>%n second(s) ago</source>
<translation>
<numerusform>%n second ago</numerusform>
<numerusform>%n seconds ago</numerusform>
</translation>
</message>
<message numerus="yes">
<location line="+4"/>
<source>%n minute(s) ago</source>
<translation>
<numerusform>%n minute ago</numerusform>
<numerusform>%n minutes ago</numerusform>
</translation>
</message>
<message numerus="yes">
<location line="+4"/>
<source>%n hour(s) ago</source>
<translation>
<numerusform>%n hour ago</numerusform>
<numerusform>%n hours ago</numerusform>
</translation>
</message>
<message numerus="yes">
<location line="+4"/>
<source>%n day(s) ago</source>
<translation>
<numerusform>%n day ago</numerusform>
<numerusform>%n days ago</numerusform>
</translation>
</message>
<message>
<location line="+6"/>
<source>Up to date</source>
<translation>Up to date</translation>
</message>
<message>
<location line="+7"/>
<source>Catching up...</source>
<translation>Catching up...</translation>
</message>
<message>
<location line="+10"/>
<source>Last received block was generated %1.</source>
<translation>Last received block was generated %1.</translation>
<source>Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Fee 0.01 recommended.</source>
<translation>Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Fee 0.01 recommended.</translation>
<source>Automatically start Bitcoin after logging in to the system.</source>
<translation>Automatically start Bitcoin after logging in to the system.</translation>
</message>
<message>
<location line="+3"/>
<source>&Start Bitcoin on system login</source>
<translation>&Start Bitcoin on system login</translation>
</message>
<message>
<location line="+35"/>
<source>Reset all client options to default.</source>
<translation>Reset all client options to default.</translation>
</message>
<message>
<location line="+3"/>
<source>&Reset Options</source>
<translation>&Reset Options</translation>
</message>
<message>
<location line="+13"/>
<source>&Network</source>
<translation>&Network</translation>
</message>
<message>
<location line="+6"/>
<source>Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.</source>
<translation>Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.</translation>
</message>
<message>
<location line="+3"/>
<source>Map port using &UPnP</source>
<translation>Map port using &UPnP</translation>
</message>
<message>
<location line="+7"/>
<source>Connect to the Bitcoin network through a SOCKS proxy (e.g. when connecting through Tor).</source>
<translation>Connect to the Bitcoin network through a SOCKS proxy (e.g. when connecting through Tor).</translation>
</message>
<message>
<location line="+3"/>
<source>&Connect through SOCKS proxy:</source>
<translation>&Connect through SOCKS proxy:</translation>
</message>
<message>
<location line="+9"/>
<source>Proxy &IP:</source>
<translation>Proxy &IP:</translation>
</message>
<message>
<location line="+19"/>
<source>IP address of the proxy (e.g. 127.0.0.1)</source>
<translation>IP address of the proxy (e.g. 127.0.0.1)</translation>
</message>
<message>
<location line="+7"/>
<source>&Port:</source>
<translation>&Port:</translation>
</message>
<message>
<location line="+19"/>
<source>Port of the proxy (e.g. 9050)</source>
<translation>Port of the proxy (e.g. 9050)</translation>
</message>
<message>
<location line="+7"/>
<source>SOCKS &Version:</source>
<translation>SOCKS &Version:</translation>
</message>
<message>
<location line="+13"/>
<source>SOCKS version of the proxy (e.g. 5)</source>
<translation>SOCKS version of the proxy (e.g. 5)</translation>
</message>
<message>
<location line="+36"/>
<source>&Window</source>
<translation>&Window</translation>
</message>
<message>
<location line="+6"/>
<source>Show only a tray icon after minimizing the window.</source>
<translation>Show only a tray icon after minimizing the window.</translation>
</message>
<message>
<location line="+3"/>
<source>&Minimize to the tray instead of the taskbar</source>
<translation>&Minimize to the tray instead of the taskbar</translation>
</message>
<message>
<location line="+7"/>
<source>Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu.</source>
<translation>Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu.</translation>
<source>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</source>
<translation>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</translation>
</message>
<message>
<location line="-141"/>
<source>Balance:</source>
<translation>Balance:</translation>
</message>
<message>
<location line="+58"/>
<source>Number of transactions:</source>
<translation>Number of transactions:</translation>
</message>
<message>
<location line="-29"/>
<source>Unconfirmed:</source>
<translation>Unconfirmed:</translation>
</message>
<message>
<location line="-78"/>
<source>Wallet</source>
<translation>Wallet</translation>
</message>
<message>
<location line="+124"/>
<source>Immature:</source>
<translation>Immature:</translation>
</message>
<message>
<location line="+13"/>
<source>Mined balance that has not yet matured</source>
<translation>Mined balance that has not yet matured</translation>
<source>Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</translation>
<source>Signatures - Sign / Verify a Message</source>
<translation>Signatures - Sign / Verify a Message</translation>
</message>
<message>
<location line="+13"/>
<source>&Sign Message</source>
<translation>&Sign Message</translation>
</message>
<message>
<location line="+6"/>
<source>You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</source>
<translation>You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</translation>
</message>
<message>
<location line="+18"/>
<source>The address to sign the message with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</source>
<translation>The address to sign the message with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</translation>
</message>
<message>
<location line="+10"/>
<location line="+213"/>
<source>Choose an address from the address book</source>
<translation>Choose an address from the address book</translation>
</message>
<message>
<location line="-203"/>
<location line="+213"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
<location line="-203"/>
<source>Paste address from clipboard</source>
<translation>Paste address from clipboard</translation>
</message>
<message>
<location line="+10"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
<location line="+12"/>
<source>Enter the message you want to sign here</source>
<translation>Enter the message you want to sign here</translation>
</message>
<message>
<location line="+7"/>
<source>Signature</source>
<translation>Signature</translation>
</message>
<message>
<location line="+27"/>
<source>Copy the current signature to the system clipboard</source>
<translation>Copy the current signature to the system clipboard</translation>
</message>
<message>
<location line="+21"/>
<source>Sign the message to prove you own this Bitcoin address</source>
<translation>Sign the message to prove you own this Bitcoin address</translation>
</message>
<message>
<location line="+3"/>
<source>Sign &Message</source>
<translation>Sign &Message</translation>
</message>
<message>
<location line="+14"/>
<source>Reset all sign message fields</source>
<translation>Reset all sign message fields</translation>
</message>
<message>
<location line="+3"/>
<location line="+146"/>
<source>Clear &All</source>
<translation>Clear &All</translation>
</message>
<message>
<location line="-87"/>
<source>&Verify Message</source>
<translation>&Verify Message</translation>
</message>
<message>
<location line="+6"/>
<source>Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.</source>
<translation>Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.</translation>
</message>
<message>
<location line="+21"/>
<source>The address the message was signed with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</source>
<translation>The address the message was signed with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</translation>
</message>
<message>
<location line="+40"/>
<source>Verify the message to ensure it was signed with the specified Bitcoin address</source>
<translation>Verify the message to ensure it was signed with the specified Bitcoin address</translation>
</message>
<message>
<location line="+3"/>
<source>Verify &Message</source>
<translation>Verify &Message</translation>
</message>
<message>
<location line="+14"/>
<source>Reset all verify message fields</source>
<translation>Reset all verify message fields</translation>
<numerusform>, broadcast through %n node</numerusform>
<numerusform>, broadcast through %n nodes</numerusform>
</translation>
</message>
<message>
<location line="+4"/>
<source>Date</source>
<translation>Date</translation>
</message>
<message>
<location line="+7"/>
<source>Source</source>
<translation>Source</translation>
</message>
<message>
<location line="+0"/>
<source>Generated</source>
<translation>Generated</translation>
</message>
<message>
<location line="+5"/>
<location line="+17"/>
<source>From</source>
<translation>From</translation>
</message>
<message>
<location line="+1"/>
<location line="+22"/>
<location line="+58"/>
<source>To</source>
<translation>To</translation>
</message>
<message>
<location line="-77"/>
<location line="+2"/>
<source>own address</source>
<translation>own address</translation>
</message>
<message>
<location line="-2"/>
<source>label</source>
<translation>label</translation>
</message>
<message>
<location line="+37"/>
<location line="+12"/>
<location line="+45"/>
<location line="+17"/>
<location line="+30"/>
<source>Credit</source>
<translation>Credit</translation>
</message>
<message numerus="yes">
<location line="-102"/>
<source>matures in %n more block(s)</source>
<translation>
<numerusform>matures in %n more block</numerusform>
<numerusform>matures in %n more blocks</numerusform>
</translation>
</message>
<message>
<location line="+2"/>
<source>not accepted</source>
<translation>not accepted</translation>
</message>
<message>
<location line="+44"/>
<location line="+8"/>
<location line="+15"/>
<location line="+30"/>
<source>Debit</source>
<translation>Debit</translation>
</message>
<message>
<location line="-39"/>
<source>Transaction fee</source>
<translation>Transaction fee</translation>
</message>
<message>
<location line="+16"/>
<source>Net amount</source>
<translation>Net amount</translation>
</message>
<message>
<location line="+6"/>
<source>Message</source>
<translation>Message</translation>
</message>
<message>
<location line="+2"/>
<source>Comment</source>
<translation>Comment</translation>
</message>
<message>
<location line="+2"/>
<source>Transaction ID</source>
<translation>Transaction ID</translation>
</message>
<message>
<location line="+3"/>
<source>Generated coins must mature 120 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</source>
<translation>Generated coins must mature 120 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</translation>
</message>
<message>
<location line="+7"/>
<source>Debug information</source>
<translation>Debug information</translation>
</message>
<message>
<location line="+8"/>
<source>Transaction</source>
<translation>Transaction</translation>
</message>
<message>
<location line="+3"/>
<source>Inputs</source>
<translation>Inputs</translation>
</message>
<message>
<location line="+23"/>
<source>Amount</source>
<translation>Amount</translation>
</message>
<message>
<location line="+1"/>
<source>true</source>
<translation>true</translation>
</message>
<message>
<location line="+0"/>
<source>false</source>
<translation>false</translation>
</message>
<message>
<location line="-209"/>
<source>, has not been successfully broadcast yet</source>
<translation>, has not been successfully broadcast yet</translation>
</message>
<message numerus="yes">
<location line="-35"/>
<source>Open for %n more block(s)</source>
<translation>
<numerusform>Open for %n more block</numerusform>
<numerusform>Open for %n more blocks</numerusform>
<source>Set database cache size in megabytes (default: 25)</source>
<translation>Set database cache size in megabytes (default: 25)</translation>
</message>
<message>
<location line="-27"/>
<source>Listen for connections on <port> (default: 8333 or testnet: 18333)</source>
<translation>Listen for connections on <port> (default: 8333 or testnet: 18333)</translation>
</message>
<message>
<location line="+5"/>
<source>Maintain at most <n> connections to peers (default: 125)</source>
<translation>Maintain at most <n> connections to peers (default: 125)</translation>
</message>
<message>
- <location line="-46"/>
+ <location line="-47"/>
<source>Connect to a node to retrieve peer addresses, and disconnect</source>
<translation>Connect to a node to retrieve peer addresses, and disconnect</translation>
</message>
<message>
- <location line="+77"/>
+ <location line="+78"/>
<source>Specify your own public address</source>
<translation>Specify your own public address</translation>
</message>
<message>
<location line="+3"/>
<source>Threshold for disconnecting misbehaving peers (default: 100)</source>
<translation>Threshold for disconnecting misbehaving peers (default: 100)</translation>
</message>
<message>
- <location line="-129"/>
+ <location line="-130"/>
<source>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</source>
<translation>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</translation>
</message>
<message>
<location line="-28"/>
<source>An error occurred while setting up the RPC port %u for listening on IPv4: %s</source>
<translation>An error occurred while setting up the RPC port %u for listening on IPv4: %s</translation>
</message>
<message>
<location line="+26"/>
<source>Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)</source>
<translation>Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)</translation>
</message>
<message>
<location line="+36"/>
<source>Accept command line and JSON-RPC commands</source>
<translation>Accept command line and JSON-RPC commands</translation>
</message>
<message>
- <location line="+74"/>
+ <location line="+75"/>
<source>Run in the background as a daemon and accept commands</source>
<translation>Run in the background as a daemon and accept commands</translation>
</message>
<message>
<location line="+32"/>
<source>Use the test network</source>
<translation>Use the test network</translation>
</message>
<message>
- <location line="-105"/>
+ <location line="-106"/>
<source>Accept connections from outside (default: 1 if no -proxy or -connect)</source>
<translation>Accept connections from outside (default: 1 if no -proxy or -connect)</translation>
</message>
<message>
<location line="-76"/>
<source>%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.
</source>
<translation>%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.</translation>
</message>
<message>
<location line="+15"/>
<source>An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s</source>
<translation>An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s</translation>
</message>
<message>
<location line="+3"/>
<source>Bind to given address and always listen on it. Use [host]:port notation for IPv6</source>
<translation>Bind to given address and always listen on it. Use [host]:port notation for IPv6</translation>
</message>
<message>
<location line="+3"/>
<source>Cannot obtain a lock on data directory %s. Bitcoin is probably already running.</source>
<translation>Cannot obtain a lock on data directory %s. Bitcoin is probably already running.</translation>
</message>
<message>
<location line="+3"/>
<source>Corrupted block database detected. Please restart the client with -reindex.</source>
<translation>Corrupted block database detected. Please restart the client with -reindex.</translation>
</message>
<message>
<location line="+2"/>
<source>Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat.</source>
<translation>Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat.</translation>
</message>
<message>
<location line="+3"/>
<source>Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</translation>
</message>
<message>
<location line="+4"/>
<source>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!</source>
<translation>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!</translation>
</message>
<message>
<location line="+11"/>
<source>Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)</source>
<translation>Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)</translation>
</message>
<message>
<location line="+3"/>
<source>Set the number of script verification threads (1-16, 0=auto, default: 0)</source>
<translation>Set the number of script verification threads (1-16, 0=auto, default: 0)</translation>
</message>
<message>
<location line="+2"/>
<source>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</source>
<translation>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</translation>
</message>
<message>
<location line="+5"/>
<source>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</source>
<translation>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</translation>
</message>
<message>
<location line="+3"/>
<source>Warning: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade.</source>
<translation>Warning: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade.</translation>
</message>
<message>
<location line="+3"/>
<source>Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly.</source>
<translation>Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly.</translation>
</message>
<message>
<location line="+3"/>
<source>Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</source>
<translation>Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</translation>
</message>
<message>
<location line="+3"/>
<source>Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.</source>
<translation>Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.</translation>
</message>
<message>
<location line="+14"/>
<source>Attempt to recover private keys from a corrupt wallet.dat</source>
<translation>Attempt to recover private keys from a corrupt wallet.dat</translation>