# NOTE: This dependency is not strictly necessary, but without it make may try to build both in parallel, which breaks the LevelDB build system in a race
entry.pushKV("hex", EncodeHexTx(tx)); // the hex-encoded transaction. used the name "hex" to be consistent with the verbose output of "getrawtransaction".
}
diff --git a/src/key.cpp b/src/key.cpp
index f09536fbb..2235c271d 100644
--- a/src/key.cpp
+++ b/src/key.cpp
@@ -1,222 +1,223 @@
// Copyright (c) 2009-2014 The Bitcoin Core developers
// Distributed under the MIT software license, see the accompanying
// file COPYING or http://www.opensource.org/licenses/mit-license.php.
LogPrintf("CheckForkWarningConditions: Warning: Large valid fork found\n forking the chain at height %d (%s)\n lasting to height %d (%s).\nChain state database corruption likely.\n",
LogPrintf("CheckForkWarningConditions: Warning: Found invalid chain at least ~6 blocks longer than our best chain.\nChain state database corruption likely.\n");
// Allow exceptions from under-length message on vRecv
LogPrintf("ProcessMessages(%s, %u bytes) : Exception '%s' caught, normally caused by a message being shorter than its stated length\n", strCommand, nMessageSize, e.what());
bool fFetch = state.fPreferredDownload || (nPreferredDownload == 0 && !pto->fClient && !pto->fOneShot); // Download if this is a nice peer, or we have no nice peers and this one might do.
* Process an incoming block. This only returns after the best known valid
* block is made active. Note that it does not, however, guarantee that the
* specific block passed to it has been checked for validity!
*
* @param[out] state This may be set to an Error state if any error occurred processing it, including during validation/connection/etc of otherwise unrelated blocks during reorganisation; or it may be set to an Invalid state if pblock is itself invalid (but this is not guaranteed even when the block is checked). If you want to *possibly* get feedback on whether pblock is valid, you must also install a CValidationInterface - this will have its BlockChecked method called whenever *any* block completes validation.
* @param[in] pfrom The node which we are receiving the block from; it is added to mapBlockSource and may be penalised if the block is invalid.
* @param[in] pblock The block we want to process.
* @param[out] dbp If pblock is stored to disk (or already there), this will be set to its location.
uint256 CPartialMerkleTree::TraverseAndExtract(int height, unsigned int pos, unsigned int &nBitsUsed, unsigned int &nHashUsed, std::vector<uint256> &vMatch) {
if (nBitsUsed >= vBits.size()) {
// overflowed the bits array - failure
fBad = true;
- return 0;
+ return uint256();
}
bool fParentOfMatch = vBits[nBitsUsed++];
if (height==0 || !fParentOfMatch) {
// if at height 0, or nothing interesting below, use stored hash and do not descend
if (nHashUsed >= vHash.size()) {
// overflowed the hash array - failure
fBad = true;
- return 0;
+ return uint256();
}
const uint256 &hash = vHash[nHashUsed++];
if (height==0 && fParentOfMatch) // in case of height 0, we have a matched txid
vMatch.push_back(hash);
return hash;
} else {
// otherwise, descend into the subtrees to extract matched txids and hashes
uint256 left = TraverseAndExtract(height-1, pos*2, nBitsUsed, nHashUsed, vMatch), right;
if (pos*2+1 < CalcTreeWidth(height-1)) {
right = TraverseAndExtract(height-1, pos*2+1, nBitsUsed, nHashUsed, vMatch);
if (right == left) {
// If the left and right branch should never be identical as the transaction
// It is common for nodes with good ping times to suddenly become lagged,
// due to a new block arriving or other large transfer.
// Merely reporting pingtime might fool the caller into thinking the node was still responsive,
// since pingtime does not update until the ping is complete, which might take a while.
// So, if a ping is taking an unusually long time in flight,
// the caller can immediately detect that this is happening.
int64_t nPingUsecWait = 0;
if ((0 != nPingNonceSent) && (0 != nPingUsecStart)) {
nPingUsecWait = GetTimeMicros() - nPingUsecStart;
}
// Raw ping time is in microseconds, but show it to user as whole seconds (Bitcoin users should be well used to small numbers with many decimal places by now :)
// disable some items (like Copy Transaction ID, lock, unlock) for tree roots in context menu
if (item->text(COLUMN_TXHASH).length() == 64) // transaction hash is 64 characters (this means its a child node, so its not a parent node in tree mode)
{
copyTransactionHashAction->setEnabled(true);
- if (model->isLockedCoin(uint256(item->text(COLUMN_TXHASH).toStdString()), item->text(COLUMN_VOUT_INDEX).toUInt()))
+ if (model->isLockedCoin(uint256S(item->text(COLUMN_TXHASH).toStdString()), item->text(COLUMN_VOUT_INDEX).toUInt()))
{
lockAction->setEnabled(false);
unlockAction->setEnabled(true);
}
else
{
lockAction->setEnabled(true);
unlockAction->setEnabled(false);
}
}
else // this means click on parent node in tree mode -> disable all
void CoinControlDialog::viewItemChanged(QTreeWidgetItem* item, int column)
{
if (column == COLUMN_CHECKBOX && item->text(COLUMN_TXHASH).length() == 64) // transaction hash is 64 characters (this means its a child node, so its not a parent node in tree mode)
dPriority = dPriorityInputs / (nBytes - nBytesInputs + (nQuantityUncompressed * 29)); // 29 = 180 - 151 (uncompressed public keys are over the limit. max 151 bytes of the input are ignored for priority)
QString toolTip1 = tr("This label turns red, if the transaction size is greater than 1000 bytes.") + "<br /><br />";
toolTip1 += tr("This means a fee of at least %1 per kB is required.").arg(BitcoinUnits::formatWithUnit(nDisplayUnit, CWallet::minTxFee.GetFeePerK())) + "<br /><br />";
toolTip1 += tr("Can vary +/- 1 byte per input.");
QString toolTip2 = tr("Transactions with higher priority are more likely to get included into a block.") + "<br /><br />";
toolTip2 += tr("This label turns red, if the priority is smaller than \"medium\".") + "<br /><br />";
toolTip2 += tr("This means a fee of at least %1 per kB is required.").arg(BitcoinUnits::formatWithUnit(nDisplayUnit, CWallet::minTxFee.GetFeePerK()));
QString toolTip3 = tr("This label turns red, if any recipient receives an amount smaller than %1.").arg(BitcoinUnits::formatWithUnit(nDisplayUnit, ::minRelayTxFee.GetFee(546)));
// how many satoshis the estimated fee can vary per byte we guess wrong
" \"previousblockhash\" : \"xxxx\", (string) The hash of current highest block\n"
" \"transactions\" : [ (array) contents of non-coinbase transactions that should be included in the next block\n"
" {\n"
" \"data\" : \"xxxx\", (string) transaction data encoded in hexadecimal (byte-for-byte)\n"
" \"hash\" : \"xxxx\", (string) hash/id encoded in little-endian hexadecimal\n"
" \"depends\" : [ (array) array of numbers \n"
" n (numeric) transactions before this one (by 1-based index in 'transactions' list) that must be present in the final block if this one is\n"
" ,...\n"
" ],\n"
" \"fee\": n, (numeric) difference in value between transaction inputs and outputs (in Satoshis); for coinbase transactions, this is a negative Number of the total collected block fees (ie, not including the block subsidy); if key is not present, fee is unknown and clients MUST NOT assume there isn't one\n"
" \"sigops\" : n, (numeric) total number of SigOps, as counted for purposes of block limits; if key is not present, sigop count is unknown and clients MUST NOT assume there aren't any\n"
" \"required\" : true|false (boolean) if provided and true, this transaction must be in the final block\n"
" }\n"
" ,...\n"
" ],\n"
" \"coinbaseaux\" : { (json object) data that should be included in the coinbase's scriptSig content\n"
" \"flags\" : \"flags\" (string) \n"
" },\n"
" \"coinbasevalue\" : n, (numeric) maximum allowable input to coinbase transaction, including the generation award and transaction fees (in Satoshis)\n"
" \"coinbasetxn\" : { ... }, (json object) information for coinbase transaction\n"
" \"target\" : \"xxxx\", (string) The hash target\n"
" \"mintime\" : xxx, (numeric) The minimum timestamp appropriate for next block time in seconds since epoch (Jan 1 1970 GMT)\n"
" \"mutable\" : [ (array of string) list of ways the block template may be changed \n"
" \"value\" (string) A way the block template may be changed, e.g. 'time', 'transactions', 'prevblock'\n"
" ,...\n"
" ],\n"
" \"noncerange\" : \"00000000ffffffff\", (string) A range of valid nonces\n"
" \"sigoplimit\" : n, (numeric) limit of sigops in blocks\n"
" \"sizelimit\" : n, (numeric) limit of block size\n"
" \"curtime\" : ttt, (numeric) current timestamp in seconds since epoch (Jan 1 1970 GMT)\n"
" \"bits\" : \"xxx\", (string) compressed target of next block\n"
" \"height\" : n (numeric) The height of the next block\n"
Value getnewaddress(const Array& params, bool fHelp)
{
if (fHelp || params.size() > 1)
throw runtime_error(
"getnewaddress ( \"account\" )\n"
"\nReturns a new Bitcoin address for receiving payments.\n"
"If 'account' is specified (recommended), it is added to the address book \n"
"so payments received with the address will be credited to 'account'.\n"
"\nArguments:\n"
"1. \"account\" (string, optional) The account name for the address to be linked to. if not provided, the default account \"\" is used. It can also be set to the empty string \"\" to represent the default account. The account does not need to exist, it will be created if there is no account by the given name.\n"
"\nResult:\n"
"\"bitcoinaddress\" (string) The new bitcoin address\n"
Value getaccountaddress(const Array& params, bool fHelp)
{
if (fHelp || params.size() != 1)
throw runtime_error(
"getaccountaddress \"account\"\n"
"\nReturns the current Bitcoin address for receiving payments to this account.\n"
"\nArguments:\n"
"1. \"account\" (string, required) The account name for the address. It can also be set to the empty string \"\" to represent the default account. The account does not need to exist, it will be created and a new address created if there is no account by the given name.\n"
"\nResult:\n"
"\"bitcoinaddress\" (string) The account bitcoin address\n"
if (!pwalletMain->CreateTransaction(scriptPubKey, nValue, wtxNew, reservekey, nFeeRequired, strError))
{
if (nValue + nFeeRequired > pwalletMain->GetBalance())
strError = strprintf("Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!", FormatMoney(nFeeRequired));
LogPrintf("SendMoney() : %s\n", strError);
throw JSONRPCError(RPC_WALLET_ERROR, strError);
}
if (!pwalletMain->CommitTransaction(wtxNew, reservekey))
throw JSONRPCError(RPC_WALLET_ERROR, "Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.");
}
Value sendtoaddress(const Array& params, bool fHelp)
{
if (fHelp || params.size() < 2 || params.size() > 4)
"\nGet all transactions in blocks since block [blockhash], or all transactions if omitted\n"
"\nArguments:\n"
"1. \"blockhash\" (string, optional) The block hash to list transactions since\n"
"2. target-confirmations: (numeric, optional) The confirmations required, must be 1 or more\n"
"3. includeWatchonly: (bool, optional, default=false) Include transactions to watchonly addresses (see 'importaddress')"
"\nResult:\n"
"{\n"
" \"transactions\": [\n"
" \"account\":\"accountname\", (string) The account name associated with the transaction. Will be \"\" for the default account.\n"
" \"address\":\"bitcoinaddress\", (string) The bitcoin address of the transaction. Not present for move transactions (category = move).\n"
" \"category\":\"send|receive\", (string) The transaction category. 'send' has negative amounts, 'receive' has positive amounts.\n"
" \"amount\": x.xxx, (numeric) The amount in btc. This is negative for the 'send' category, and for the 'move' category for moves \n"
" outbound. It is positive for the 'receive' category, and for the 'move' category for inbound funds.\n"
" \"vout\" : n, (numeric) the vout value\n"
" \"fee\": x.xxx, (numeric) The amount of the fee in btc. This is negative and only available for the 'send' category of transactions.\n"
" \"confirmations\": n, (numeric) The number of confirmations for the transaction. Available for 'send' and 'receive' category of transactions.\n"
" \"blockhash\": \"hashvalue\", (string) The block hash containing the transaction. Available for 'send' and 'receive' category of transactions.\n"
" \"blockindex\": n, (numeric) The block index containing the transaction. Available for 'send' and 'receive' category of transactions.\n"
" \"blocktime\": xxx, (numeric) The block time in seconds since epoch (1 Jan 1970 GMT).\n"
" \"txid\": \"transactionid\", (string) The transaction id. Available for 'send' and 'receive' category of transactions.\n"
" \"time\": xxx, (numeric) The transaction time in seconds since epoch (Jan 1 1970 GMT).\n"
" \"timereceived\": xxx, (numeric) The time received in seconds since epoch (Jan 1 1970 GMT). Available for 'send' and 'receive' category of transactions.\n"
" \"comment\": \"...\", (string) If a comment is associated with the transaction.\n"
" \"to\": \"...\", (string) If a comment to is associated with the transaction.\n"
" ],\n"
" \"lastblock\": \"lastblockhash\" (string) The hash of the last block\n"
throw JSONRPCError(RPC_WALLET_WRONG_ENC_STATE, "Error: running with an encrypted wallet, but encryptwallet was called.");
// TODO: get rid of this .c_str() by implementing SecureString::operator=(std::string)
// Alternately, find a way to make params[0] mlock()'d to begin with.
SecureString strWalletPass;
strWalletPass.reserve(100);
strWalletPass = params[0].get_str().c_str();
if (strWalletPass.length() < 1)
throw runtime_error(
"encryptwallet <passphrase>\n"
"Encrypts the wallet with <passphrase>.");
if (!pwalletMain->EncryptWallet(strWalletPass))
throw JSONRPCError(RPC_WALLET_ENCRYPTION_FAILED, "Error: Failed to encrypt the wallet.");
// BDB seems to have a bad habit of writing old data into
// slack space in .dat files; that is bad if the old data is
// unencrypted private keys. So:
StartShutdown();
return "wallet encrypted; Bitcoin server stopping, restart to run with encrypted wallet. The keypool has been flushed, you need to make a new backup.";
}
Value lockunspent(const Array& params, bool fHelp)
{
if (fHelp || params.size() < 1 || params.size() > 2)
Value getwalletinfo(const Array& params, bool fHelp)
{
if (fHelp || params.size() != 0)
throw runtime_error(
"getwalletinfo\n"
"Returns an object containing various wallet state info.\n"
"\nResult:\n"
"{\n"
" \"walletversion\": xxxxx, (numeric) the wallet version\n"
" \"balance\": xxxxxxx, (numeric) the total confirmed bitcoin balance of the wallet\n"
" \"unconfirmed_balance\": xxx, (numeric) the total unconfirmed bitcoin balance of the wallet\n"
" \"immature_balance\": xxxxxx, (numeric) the total immature balance of the wallet\n"
" \"txcount\": xxxxxxx, (numeric) the total number of transactions in the wallet\n"
" \"keypoololdest\": xxxxxx, (numeric) the timestamp (seconds since GMT epoch) of the oldest pre-generated key in the key pool\n"
" \"keypoolsize\": xxxx, (numeric) how many new keys are pre-generated\n"
" \"unlocked_until\": ttt, (numeric) the timestamp in seconds since epoch (midnight Jan 1 1970 GMT) that the wallet is unlocked for transfers, or 0 if the wallet is locked\n"
LogPrintf("%s: Warning: This wallet contains a redeemScript of size %i which exceeds maximum size %i thus can never be redeemed. Do not use address %s.\n",
LogPrintf("Wallet passphrase changed to an nDeriveIterations of %i\n", pMasterKey.second.nDeriveIterations);
if (!crypter.SetKeyFromPassphrase(strNewWalletPassphrase, pMasterKey.second.vchSalt, pMasterKey.second.nDeriveIterations, pMasterKey.second.nDerivationMethod))
return false;
if (!crypter.Encrypt(vMasterKey, pMasterKey.second.vchCryptedKey))