strUsage += " -alertnotify=<cmd> " + _("Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)") + "\n";
strUsage += " -blocknotify=<cmd> " + _("Execute command when the best block changes (%s in cmd is replaced by block hash)") + "\n";
strUsage += " -checkblocks=<n> " + _("How many blocks to check at startup (default: 288, 0 = all)") + "\n";
strUsage += " -checklevel=<n> " + _("How thorough the block verification of -checkblocks is (0-4, default: 3)") + "\n";
strUsage += " -reindex " + _("Rebuild block chain index from current blk000??.dat files") + " " + _("on startup") + "\n";
#if !defined(WIN32)
strUsage += " -sysperms " + _("Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)") + "\n";
#endif
strUsage += " -txindex " + _("Maintain a full transaction index (default: 0)") + "\n";
strUsage += " -upnp " + _("Use UPnP to map the listening port (default: 1 when listening)") + "\n";
#else
strUsage += " -upnp " + _("Use UPnP to map the listening port (default: 0)") + "\n";
#endif
#endif
strUsage += " -whitebind=<addr> " + _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6") + "\n";
strUsage += " -whitelist=<netmask> " + _("Whitelist peers connecting from the given netmask or ip. Can be specified multiple times.") + "\n";
strUsage += " " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway") + "\n";
#ifdef ENABLE_WALLET
strUsage += "\n" + _("Wallet options:") + "\n";
strUsage += " -disablewallet " + _("Do not load the wallet and disable wallet RPC calls") + "\n";
strUsage += " -keypool=<n> " + _("Set key pool size to <n> (default: 100)") + "\n";
if (GetBoolArg("-help-debug", false))
strUsage += " -mintxfee=<amt> " + strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)"), FormatMoney(CWallet::minTxFee.GetFeePerK())) + "\n";
strUsage += " -paytxfee=<amt> " + strprintf(_("Fee (in BTC/kB) to add to transactions you send (default: %s)"), FormatMoney(payTxFee.GetFeePerK())) + "\n";
strUsage += " -txconfirmtarget=<n> " + _("If paytxfee is not set, include enough fee so transactions are confirmed on average within n blocks (default: 1)") + "\n";
strUsage += " -walletnotify=<cmd> " + _("Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)") + "\n";
strUsage += " -zapwallettxes=<mode> " + _("Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup") + "\n";
strUsage += " " + _("(default: 1, 1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)") + "\n";
strUsage += " -limitfreerelay=<n> " + _("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15)") + "\n";
strUsage += " -maxsigcachesize=<n> " + _("Limit size of signature cache to <n> entries (default: 50000)") + "\n";
}
strUsage += " -minrelaytxfee=<amt> " + strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)"), FormatMoney(::minRelayTxFee.GetFeePerK())) + "\n";
strUsage += " -printtoconsole " + _("Send trace/debug info to console instead of debug.log file") + "\n";
if (GetBoolArg("-help-debug", false))
{
strUsage += " -printblock=<hash> " + _("Print block on startup, if found in block index") + "\n";
strUsage += " -printblocktree " + _("Print block tree on startup (default: 0)") + "\n";
strUsage += " -printpriority " + _("Log transaction priority and fee per kB when mining blocks (default: 0)") + "\n";
strUsage += " -privdb " + _("Sets the DB_PRIVATE flag in the wallet db environment (default: 1)") + "\n";
strUsage += " -regtest " + _("Enter regression test mode, which uses a special chain in which blocks can be solved instantly.") + "\n";
strUsage += " " + _("This is intended for regression testing tools and app development.") + "\n";
strUsage += " " + _("In this mode -genproclimit controls how many blocks are generated immediately.") + "\n";
}
strUsage += " -shrinkdebugfile " + _("Shrink debug.log file on client startup (default: 1 when no -debug)") + "\n";
strUsage += " -testnet " + _("Use the test network") + "\n";
strUsage += " -blockmaxsize=<n> " + strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_BLOCK_MAX_SIZE) + "\n";
strUsage += " -blockprioritysize=<n> " + strprintf(_("Set maximum size of high-priority/low-fee transactions in bytes (default: %d)"), DEFAULT_BLOCK_PRIORITY_SIZE) + "\n";
strUsage += "\n" + _("RPC server options:") + "\n";
strUsage += " -server " + _("Accept command line and JSON-RPC commands") + "\n";
strUsage += " -rpcbind=<addr> " + _("Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)") + "\n";
strUsage += " -rpcport=<port> " + _("Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)") + "\n";
strUsage += " -rpcallowip=<ip> " + _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times") + "\n";
strUsage += " -rpcthreads=<n> " + _("Set the number of threads to service RPC calls (default: 4)") + "\n";
strUsage += "\n" + _("RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)") + "\n";
FormatParagraph(_("This is experimental software.")) + "\n" +
"\n" +
FormatParagraph(_("Distributed under the MIT/X11 software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>.")) + "\n" +
"\n" +
FormatParagraph(_("This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.")) +
LogPrintf("CheckForkWarningConditions: Warning: Large valid fork found\n forking the chain at height %d (%s)\n lasting to height %d (%s).\nChain state database corruption likely.\n",
LogPrintf("CheckForkWarningConditions: Warning: Found invalid chain at least ~6 blocks longer than our best chain.\nChain state database corruption likely.\n");
// Use a dummy CValidationState so someone can't setup nodes to counter-DoS based on orphan resolution (that is, feeding people an invalid block based on LegitBlockX in order to get anyone relaying LegitBlockX banned)
uint256 CPartialMerkleTree::TraverseAndExtract(int height, unsigned int pos, unsigned int &nBitsUsed, unsigned int &nHashUsed, std::vector<uint256> &vMatch) {
if (nBitsUsed >= vBits.size()) {
// overflowed the bits array - failure
fBad = true;
return 0;
}
bool fParentOfMatch = vBits[nBitsUsed++];
if (height==0 || !fParentOfMatch) {
// if at height 0, or nothing interesting below, use stored hash and do not descend
if (nHashUsed >= vHash.size()) {
// overflowed the hash array - failure
fBad = true;
return 0;
}
const uint256 &hash = vHash[nHashUsed++];
if (height==0 && fParentOfMatch) // in case of height 0, we have a matched txid
vMatch.push_back(hash);
return hash;
} else {
// otherwise, descend into the subtrees to extract matched txids and hashes
uint256 left = TraverseAndExtract(height-1, pos*2, nBitsUsed, nHashUsed, vMatch), right;
if (pos*2+1 < CalcTreeWidth(height-1))
right = TraverseAndExtract(height-1, pos*2+1, nBitsUsed, nHashUsed, vMatch);
// Allow exceptions from under-length message on vRecv
LogPrintf("ProcessMessages(%s, %u bytes) : Exception '%s' caught, normally caused by a message being shorter than its stated length\n", strCommand, nMessageSize, e.what());
// It is common for nodes with good ping times to suddenly become lagged,
// due to a new block arriving or other large transfer.
// Merely reporting pingtime might fool the caller into thinking the node was still responsive,
// since pingtime does not update until the ping is complete, which might take a while.
// So, if a ping is taking an unusually long time in flight,
// the caller can immediately detect that this is happening.
int64_t nPingUsecWait = 0;
if ((0 != nPingNonceSent) && (0 != nPingUsecStart)) {
nPingUsecWait = GetTimeMicros() - nPingUsecStart;
}
// Raw ping time is in microseconds, but show it to user as whole seconds (Bitcoin users should be well used to small numbers with many decimal places by now :)