No OneTemporary
Actions

Size

37 KB

Subscribers

None

View Options

	diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1
	index 0740eaf87f..7b15801410 100644
	--- a/doc/man/bitcoin-cli.1
	+++ b/doc/man/bitcoin-cli.1
	@@ -1,109 +1,109 @@
	-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3.
	-.TH BITCOIN-CLI "1" "May 2019" "bitcoin-cli v0.19.5.0" "User Commands"
	+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.6.
	+.TH BITCOIN-CLI "1" "May 2019" "bitcoin-cli v0.19.6.0" "User Commands"
	.SH NAME
	-bitcoin-cli \- manual page for bitcoin-cli v0.19.5.0
	+bitcoin-cli \- manual page for bitcoin-cli v0.19.6.0
	.SH DESCRIPTION
	-Bitcoin ABC RPC client version v0.19.5.0
	+Bitcoin ABC RPC client version v0.19.6.0
	.SS "Usage:"
	.TP
	bitcoin\-cli [options] <command> [params]
	Send command to Bitcoin ABC
	.IP
	bitcoin\-cli [options] \fB\-named\fR <command> [name=value] ... Send command to Bitcoin ABC (with named arguments)
	bitcoin\-cli [options] help List commands
	bitcoin\-cli [options] help <command> Get help for a command
	.SH OPTIONS
	.HP
	\-?
	.IP
	This help message
	.HP
	\fB\-conf=\fR<file>
	.IP
	Specify configuration file (default: bitcoin.conf)
	.HP
	\fB\-datadir=\fR<dir>
	.IP
	Specify data directory
	.HP
	\fB\-getinfo\fR
	.IP
	Get general information from the remote server. Note that unlike
	server\-side RPC calls, the results of \fB\-getinfo\fR is the result of
	multiple non\-atomic requests. Some entries in the result may
	represent results from different states (e.g. wallet balance may
	be as of a different block from the chain state reported)
	.PP
	Chain selection options:
	.HP
	\fB\-testnet\fR
	.IP
	Use the test chain
	.HP
	\fB\-regtest\fR
	.IP
	Enter regression test mode, which uses a special chain in which blocks
	can be solved instantly. This is intended for regression testing
	tools and app development.
	.HP
	\fB\-named\fR
	.IP
	Pass named instead of positional arguments (default: false)
	.HP
	\fB\-rpcconnect=\fR<ip>
	.IP
	Send commands to node running on <ip> (default: 127.0.0.1)
	.HP
	\fB\-rpcport=\fR<port>
	.IP
	Connect to JSON\-RPC on <port> (default: 8332 or testnet: 18332)
	.HP
	\fB\-rpcwait\fR
	.IP
	Wait for RPC server to start
	.HP
	\fB\-rpcuser=\fR<user>
	.IP
	Username for JSON\-RPC connections
	.HP
	\fB\-rpcpassword=\fR<pw>
	.IP
	Password for JSON\-RPC connections
	.HP
	\fB\-rpcclienttimeout=\fR<n>
	.IP
	Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
	900)
	.HP
	\fB\-stdinrpcpass\fR
	.TP
	Read RPC password from standard input as a single line.
	When combined
	.IP
	with \fB\-stdin\fR, the first line from standard input is used for the
	RPC password.
	.HP
	\fB\-stdin\fR
	.IP
	Read extra arguments from standard input, one per line until EOF/Ctrl\-D
	(recommended for sensitive information such as passphrases)
	.HP
	\fB\-rpcwallet=\fR<walletname>
	.IP
	Send RPC for non\-default wallet on RPC server (argument is wallet
	filename in bitcoind directory, required if bitcoind/\-Qt runs
	with multiple wallets)
	.SH COPYRIGHT
	Copyright (C) 2009-2019 The Bitcoin developers

	Please contribute if you find Bitcoin ABC useful. Visit
	<https://www.bitcoinabc.org> for further information about the software.
	The source code is available from <https://github.com/Bitcoin-ABC/bitcoin-abc>.

	This is experimental software.
	Distributed under the MIT software license, see the accompanying file COPYING
	or <https://opensource.org/licenses/MIT>

	This product includes software developed by the OpenSSL Project for use in the
	OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
	Eric Young and UPnP software written by Thomas Bernard.
	diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
	index 8a1720dc31..85110491c0 100644
	--- a/doc/man/bitcoin-qt.1
	+++ b/doc/man/bitcoin-qt.1
	@@ -1,565 +1,569 @@
	-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3.
	-.TH BITCOIN-QT "1" "May 2019" "bitcoin-qt v0.19.5.0" "User Commands"
	+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.6.
	+.TH BITCOIN-QT "1" "May 2019" "bitcoin-qt v0.19.6.0" "User Commands"
	.SH NAME
	-bitcoin-qt \- manual page for bitcoin-qt v0.19.5.0
	+bitcoin-qt \- manual page for bitcoin-qt v0.19.6.0
	.SH DESCRIPTION
	-Bitcoin ABC version v0.19.5.0 (64\-bit)
	+Bitcoin ABC version v0.19.6.0 (64\-bit)
	Usage:
	.IP
	bitcoin\-qt [command\-line options]
	.SH OPTIONS
	.HP
	\-?
	.IP
	Print this help message and exit
	.HP
	\fB\-version\fR
	.IP
	Print version and exit
	.HP
	\fB\-alertnotify=\fR<cmd>
	.IP
	Execute command when a relevant alert is received or we see a really
	long fork (%s in cmd is replaced by message)
	.HP
	+\fB\-blocksdir=\fR<dir>
	+.IP
	+Specify blocks directory (default: <datadir>/blocks)
	+.HP
	\fB\-blocknotify=\fR<cmd>
	.IP
	Execute command when the best block changes (%s in cmd is replaced by
	block hash)
	.HP
	\fB\-assumevalid=\fR<hex>
	.IP
	If this block is in the chain assume that it and its ancestors are valid
	and potentially skip their script verification (0 to verify all,
	default:
	-00000000000000000042fdb6b3730df1508a405ef98b1bdb857d4238b1c0a597,
	+000000000000000001b4b8e36aec7d4f9671a47872cb9a74dc16ca398c7dcc18,
	testnet:
	00000000000002cb911c0a756a24c2fe6c1a29acaede3569ce430b95d8ff012d)
	.HP
	\fB\-conf=\fR<file>
	.IP
	Specify configuration file (default: bitcoin.conf)
	.HP
	\fB\-datadir=\fR<dir>
	.IP
	Specify data directory
	.HP
	\fB\-dbcache=\fR<n>
	.IP
	Set database cache size in megabytes (4 to 16384, default: 450)
	.HP
	\fB\-finalizationdelay=\fR<n>
	.IP
	Set the minimum amount of time to wait between a block header reception
	and the block finalization. Unit is seconds (default: 7200)
	.HP
	\fB\-maxreorgdepth=\fR<n>
	.IP
	Configure at what depth blocks are considered final (default: 10). Use
	\fB\-1\fR to disable.
	.HP
	\fB\-loadblock=\fR<file>
	.IP
	Imports blocks from external blk000??.dat file on startup
	.HP
	\fB\-debuglogfile=\fR<file>
	.IP
	Specify location of debug log file: this can be an absolute path or a
	path relative to the data directory (default: debug.log)
	.HP
	\fB\-maxorphantx=\fR<n>
	.IP
	Keep at most <n> unconnectable transactions in memory (default: 100)
	.HP
	\fB\-maxmempool=\fR<n>
	.IP
	Keep the transaction memory pool below <n> megabytes (default: 300)
	.HP
	\fB\-mempoolexpiry=\fR<n>
	.IP
	Do not keep transactions in the mempool longer than <n> hours (default:
	336)
	.HP
	\fB\-persistmempool\fR
	.IP
	Whether to save the mempool on shutdown and load on restart (default: 1)
	.HP
	\fB\-blockreconstructionextratxn=\fR<n>
	.IP
	Extra transactions to keep in memory for compact block reconstructions
	(default: 100)
	.HP
	\fB\-par=\fR<n>
	.IP
	-Set the number of script verification threads (\fB\-4\fR to 16, 0 = auto, <0 =
	+Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 =
	leave that many cores free, default: 0)
	.HP
	\fB\-pid=\fR<file>
	.IP
	Specify pid file (default: bitcoind.pid)
	.HP
	\fB\-prune=\fR<n>
	.IP
	Reduce storage requirements by enabling pruning (deleting) of old
	blocks. This allows the pruneblockchain RPC to be called to
	delete specific blocks, and enables automatic pruning of old
	blocks if a target size in MiB is provided. This mode is
	incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
	setting requires re\-downloading the entire blockchain. (default:
	0 = disable pruning blocks, 1 = allow manual pruning via RPC,
	>550 = automatically prune block files to stay under the
	specified target size in MiB)
	.HP
	\fB\-reindex\-chainstate\fR
	.IP
	Rebuild chain state from the currently indexed blocks
	.HP
	\fB\-reindex\fR
	.IP
	Rebuild chain state and block index from the blk*.dat files on disk
	.HP
	\fB\-sysperms\fR
	.IP
	Create new files with system default permissions, instead of umask 077
	(only effective with disabled wallet functionality)
	.HP
	\fB\-txindex\fR
	.IP
	Maintain a full transaction index, used by the getrawtransaction rpc
	call (default: 0)
	.HP
	\fB\-usecashaddr\fR
	.IP
	Use Cash Address for destination encoding instead of base58 (activate by
	default on Jan, 14)
	.PP
	Connection options:
	.HP
	\fB\-addnode=\fR<ip>
	.IP
	Add a node to connect to and attempt to keep the connection open (see
	the `addnode` RPC command help for more info)
	.HP
	\fB\-banscore=\fR<n>
	.IP
	Threshold for disconnecting misbehaving peers (default: 100)
	.HP
	\fB\-bantime=\fR<n>
	.IP
	Number of seconds to keep misbehaving peers from reconnecting (default:
	86400)
	.HP
	\fB\-bind=\fR<addr>
	.IP
	Bind to given address and always listen on it. Use [host]:port notation
	for IPv6
	.HP
	\fB\-connect=\fR<ip>
	.IP
	Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic
	connections (the rules for this peer are the same as for
	\fB\-addnode\fR)
	.HP
	\fB\-discover\fR
	.IP
	Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
	or \fB\-proxy\fR)
	.HP
	\fB\-dns\fR
	.IP
	Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
	.HP
	\fB\-dnsseed\fR
	.IP
	Query for peer addresses via DNS lookup, if low on addresses (default: 1
	unless \fB\-connect\fR/\-noconnect)
	.HP
	\fB\-externalip=\fR<ip>
	.IP
	Specify your own public address
	.HP
	\fB\-forcednsseed\fR
	.IP
	Always query for peer addresses via DNS lookup (default: 0)
	.HP
	\fB\-listen\fR
	.IP
	Accept connections from outside (default: 1 if no \fB\-proxy\fR or
	\fB\-connect\fR/\-noconnect)
	.HP
	\fB\-listenonion\fR
	.IP
	Automatically create Tor hidden service (default: 1)
	.HP
	\fB\-maxconnections=\fR<n>
	.IP
	Maintain at most <n> connections to peers (default: 125)
	.HP
	\fB\-maxreceivebuffer=\fR<n>
	.IP
	Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
	.HP
	\fB\-maxsendbuffer=\fR<n>
	.IP
	Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
	.HP
	\fB\-maxtimeadjustment\fR
	.IP
	Maximum allowed median peer time offset adjustment. Local perspective of
	time may be influenced by peers forward or backward by this
	amount. (default: 4200 seconds)
	.HP
	\fB\-onion=\fR<ip:port>
	.IP
	Use separate SOCKS5 proxy to reach peers via Tor hidden services
	(default: \fB\-proxy\fR)
	.HP
	\fB\-onlynet=\fR<net>
	.IP
	Only connect to nodes in network <net> (ipv4, ipv6 or onion)
	.HP
	\fB\-permitbaremultisig\fR
	.IP
	Relay non\-P2SH multisig (default: 1)
	.HP
	\fB\-peerbloomfilters\fR
	.IP
	Support filtering of blocks and transaction with bloom filters (default:
	1)
	.HP
	\fB\-port=\fR<port>
	.IP
	Listen for connections on <port> (default: 8333 or testnet: 18333)
	.HP
	\fB\-proxy=\fR<ip:port>
	.IP
	Connect through SOCKS5 proxy
	.HP
	\fB\-proxyrandomize\fR
	.IP
	Randomize credentials for every proxy connection. This enables Tor
	stream isolation (default: 1)
	.HP
	\fB\-seednode=\fR<ip>
	.IP
	Connect to a node to retrieve peer addresses, and disconnect
	.HP
	\fB\-timeout=\fR<n>
	.IP
	Specify connection timeout in milliseconds (minimum: 1, default: 5000)
	.HP
	\fB\-torcontrol=\fR<ip>:<port>
	.IP
	Tor control port to use if onion listening enabled (default:
	127.0.0.1:9051)
	.HP
	\fB\-torpassword=\fR<pass>
	.IP
	Tor control port password (default: empty)
	.HP
	\fB\-upnp\fR
	.IP
	Use UPnP to map the listening port (default: 0)
	.HP
	\fB\-whitebind=\fR<addr>
	.IP
	Bind to given address and whitelist peers connecting to it. Use
	[host]:port notation for IPv6
	.HP
	\fB\-whitelist=\fR<IP address or network>
	.IP
	Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
	CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
	times. Whitelisted peers cannot be DoS banned and their
	transactions are always relayed, even if they are already in the
	mempool, useful e.g. for a gateway
	.HP
	\fB\-whitelistrelay\fR
	.IP
	Accept relayed transactions received from whitelisted peers even when
	not relaying transactions (default: 1)
	.HP
	\fB\-whitelistforcerelay\fR
	.IP
	Force relay of transactions from whitelisted peers even if they violate
	local relay policy (default: 1)
	.HP
	\fB\-maxuploadtarget=\fR<n>
	.IP
	Tries to keep outbound traffic under the given target (in MiB per 24h),
	0 = no limit (default: 0)
	.PP
	Wallet options:
	.HP
	\fB\-disablewallet\fR
	.IP
	Do not load the wallet and disable wallet RPC calls
	.HP
	\fB\-keypool=\fR<n>
	.IP
	Set key pool size to <n> (default: 1000)
	.HP
	\fB\-fallbackfee=\fR<amt>
	.IP
	A fee rate (in BCH/kB) that will be used when fee estimation has
	insufficient data (default: 0.0002)
	.HP
	\fB\-paytxfee=\fR<amt>
	.IP
	Fee (in BCH/kB) to add to transactions you send (default: 0.00)
	.HP
	\fB\-rescan\fR
	.IP
	Rescan the block chain for missing wallet transactions on startup
	.HP
	\fB\-salvagewallet\fR
	.IP
	Attempt to recover private keys from a corrupt wallet on startup
	.HP
	\fB\-spendzeroconfchange\fR
	.IP
	Spend unconfirmed change when sending transactions (default: 1)
	.HP
	\fB\-usehd\fR
	.IP
	Use hierarchical deterministic key generation (HD) after BIP32. Only has
	effect during wallet creation/first start (default: 1)
	.HP
	\fB\-upgradewallet\fR
	.IP
	Upgrade wallet to latest format on startup
	.HP
	\fB\-wallet=\fR<file>
	.IP
	Specify wallet file (within data directory) (default: wallet.dat)
	.HP
	\fB\-walletbroadcast\fR
	.IP
	Make the wallet broadcast transactions (default: 1)
	.HP
	\fB\-walletdir=\fR<dir>
	.IP
	Specify directory to hold wallets (default: <datadir>/wallets if it
	exists, otherwise <datadir>)
	.HP
	\fB\-walletnotify=\fR<cmd>
	.IP
	Execute command when a wallet transaction changes (%s in cmd is replaced
	by TxID)
	.HP
	\fB\-zapwallettxes=\fR<mode>
	.IP
	Delete all wallet transactions and only recover those parts of the
	blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
	account owner and payment request information, 2 = drop tx meta
	data)
	.PP
	ZeroMQ notification options:
	.HP
	\fB\-zmqpubhashblock=\fR<address>
	.IP
	Enable publish hash block in <address>
	.HP
	\fB\-zmqpubhashtx=\fR<address>
	.IP
	Enable publish hash transaction in <address>
	.HP
	\fB\-zmqpubrawblock=\fR<address>
	.IP
	Enable publish raw block in <address>
	.HP
	\fB\-zmqpubrawtx=\fR<address>
	.IP
	Enable publish raw transaction in <address>
	.PP
	Debugging/Testing options:
	.HP
	\fB\-uacomment=\fR<cmt>
	.IP
	Append comment to the user agent string
	.HP
	\fB\-debug=\fR<category>
	.IP
	Output debugging information (default: 0, supplying <category> is
	optional). If <category> is not supplied or if <category> = 1,
	output all debugging information.<category> can be: net, tor,
	mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
	selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
	libevent, coindb, qt, leveldb.
	.HP
	\fB\-debugexclude=\fR<category>
	.IP
	Exclude debugging information for a category. Can be used in conjunction
	with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
	or more specified categories.
	.HP
	\fB\-help\-debug\fR
	.IP
	Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR)
	.HP
	\fB\-logips\fR
	.IP
	Include IP addresses in debug output (default: 0)
	.HP
	\fB\-logtimestamps\fR
	.IP
	Prepend debug output with timestamp (default: 1)
	.HP
	\fB\-excessutxocharge=\fR<amt>
	.IP
	Fees (in BCH/kB) to charge per utxo created forrelaying, and mining
	(default: 0.00)
	.HP
	\fB\-minrelaytxfee=\fR<amt>
	.IP
	Fees (in BCH/kB) smaller than this are considered zero fee for relaying,
	mining and transaction creation (default: 0.00001)
	.HP
	\fB\-maxtxfee=\fR<amt>
	.IP
	Maximum total fees (in BCH) to use in a single wallet transaction or raw
	transaction; setting this too low may abort large transactions
	(default: 0.10)
	.HP
	\fB\-printtoconsole\fR
	.IP
	Send trace/debug info to console instead of debug.log file
	.HP
	\fB\-shrinkdebugfile\fR
	.IP
	Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
	.PP
	Chain selection options:
	.HP
	\fB\-testnet\fR
	.IP
	Use the test chain
	.PP
	Node relay options:
	.HP
	\fB\-bytespersigop\fR
	.IP
	Equivalent bytes per sigop in transactions for relay and mining
	(default: 20)
	.HP
	\fB\-datacarrier\fR
	.IP
	Relay and mine data carrier transactions (default: 1)
	.HP
	\fB\-datacarriersize\fR
	.IP
	Maximum size of data in data carrier transactions we relay and mine
	(default: 223)
	.PP
	Block creation options:
	.HP
	\fB\-blockmaxsize=\fR<n>
	.IP
	Set maximum block size in bytes (default: 2000000)
	.HP
	\fB\-blockprioritypercentage=\fR<n>
	.IP
	Set maximum percentage of a block reserved to high\-priority/low\-fee
	transactions (default: 5)
	.HP
	\fB\-blockmintxfee=\fR<amt>
	.IP
	Set lowest fee rate (in BCH/kB) for transactions to be included in block
	creation. (default: 0.00001)
	.PP
	RPC server options:
	.HP
	\fB\-server\fR
	.IP
	Accept command line and JSON\-RPC commands
	.HP
	\fB\-rest\fR
	.IP
	Accept public REST requests (default: 0)
	.HP
	\fB\-rpcbind=\fR<addr>
	.IP
	Bind to given address to listen for JSON\-RPC connections. Use
	[host]:port notation for IPv6. This option can be specified
	multiple times (default: bind to all interfaces)
	.HP
	\fB\-rpccookiefile=\fR<loc>
	.IP
	Location of the auth cookie (default: data dir)
	.HP
	\fB\-rpcuser=\fR<user>
	.IP
	Username for JSON\-RPC connections
	.HP
	\fB\-rpcpassword=\fR<pw>
	.IP
	Password for JSON\-RPC connections
	.HP
	\fB\-rpcauth=\fR<userpw>
	.IP
	Username and hashed password for JSON\-RPC connections. The field
	<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
	canonical python script is included in share/rpcuser. The client
	then connects normally using the
	rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
	option can be specified multiple times
	.HP
	\fB\-rpcport=\fR<port>
	.IP
	Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
	18332)
	.HP
	\fB\-rpcallowip=\fR<ip>
	.IP
	Allow JSON\-RPC connections from specified source. Valid for <ip> are a
	single IP (e.g. 1.2.3.4), a network/netmask (e.g.
	1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
	option can be specified multiple times
	.HP
	\fB\-rpcthreads=\fR<n>
	.IP
	Set the number of threads to service RPC calls (default: 4)
	.HP
	\fB\-rpccorsdomain\fR=\fI\,value\/\fR
	.IP
	Domain from which to accept cross origin requests (browser enforced)
	.PP
	UI Options:
	.HP
	\fB\-choosedatadir\fR
	.IP
	Choose data directory on startup (default: 0)
	.HP
	\fB\-lang=\fR<lang>
	.IP
	Set language, for example "de_DE" (default: system locale)
	.HP
	\fB\-min\fR
	.IP
	Start minimized
	.HP
	\fB\-rootcertificates=\fR<file>
	.IP
	Set SSL root certificates for payment request (default: \fB\-system\-\fR)
	.HP
	\fB\-splash\fR
	.IP
	Show splash screen on startup (default: 1)
	.HP
	\fB\-resetguisettings\fR
	.IP
	Reset all settings changed in the GUI
	.SH COPYRIGHT
	Copyright (C) 2009-2019 The Bitcoin developers

	Please contribute if you find Bitcoin ABC useful. Visit
	<https://www.bitcoinabc.org> for further information about the software.
	The source code is available from <https://github.com/Bitcoin-ABC/bitcoin-abc>.

	This is experimental software.
	Distributed under the MIT software license, see the accompanying file COPYING
	or <https://opensource.org/licenses/MIT>

	This product includes software developed by the OpenSSL Project for use in the
	OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
	Eric Young and UPnP software written by Thomas Bernard.
	diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1
	index 96df1a4eff..25f63483c1 100644
	--- a/doc/man/bitcoin-tx.1
	+++ b/doc/man/bitcoin-tx.1
	@@ -1,119 +1,119 @@
	-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3.
	-.TH BITCOIN-TX "1" "May 2019" "bitcoin-tx v0.19.5.0" "User Commands"
	+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.6.
	+.TH BITCOIN-TX "1" "May 2019" "bitcoin-tx v0.19.6.0" "User Commands"
	.SH NAME
	-bitcoin-tx \- manual page for bitcoin-tx v0.19.5.0
	+bitcoin-tx \- manual page for bitcoin-tx v0.19.6.0
	.SH DESCRIPTION
	-Bitcoin ABC bitcoin\-tx utility version v0.19.5.0
	+Bitcoin ABC bitcoin\-tx utility version v0.19.6.0
	.SS "Usage:"
	.TP
	bitcoin\-tx [options] <hex\-tx> [commands]
	Update hex\-encoded bitcoin transaction
	.TP
	bitcoin\-tx [options] \fB\-create\fR [commands]
	Create hex\-encoded bitcoin transaction
	.SH OPTIONS
	.HP
	\-?
	.IP
	This help message
	.HP
	\fB\-create\fR
	.IP
	Create new, empty TX.
	.HP
	\fB\-json\fR
	.IP
	Select JSON output
	.HP
	\fB\-txid\fR
	.IP
	Output only the hex\-encoded transaction id of the resultant transaction.
	.PP
	Chain selection options:
	.HP
	\fB\-testnet\fR
	.IP
	Use the test chain
	.HP
	\fB\-regtest\fR
	.IP
	Enter regression test mode, which uses a special chain in which blocks
	can be solved instantly. This is intended for regression testing
	tools and app development.
	.PP
	Commands:
	.IP
	delin=N
	.IP
	Delete input N from TX
	.IP
	delout=N
	.IP
	Delete output N from TX
	.IP
	in=TXID:VOUT(:SEQUENCE_NUMBER)
	.IP
	Add input to TX
	.IP
	locktime=N
	.IP
	Set TX lock time to N
	.IP
	nversion=N
	.IP
	Set TX version to N
	.IP
	outaddr=VALUE:ADDRESS
	.IP
	Add address\-based output to TX
	.IP
	outpubkey=VALUE:PUBKEY[:FLAGS]
	.IP
	Add pay\-to\-pubkey output to TX. Optionally add the "S" flag to wrap the
	output in a pay\-to\-script\-hash.
	.IP
	outdata=[VALUE:]DATA
	.IP
	Add data\-based output to TX
	.IP
	outscript=VALUE:SCRIPT[:FLAGS]
	.IP
	Add raw script output to TX. Optionally add the "S" flag to wrap the
	output in a pay\-to\-script\-hash.
	.IP
	outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]
	.IP
	Add Pay To n\-of\-m Multi\-sig output to TX. n = REQUIRED, m = PUBKEYS.
	Optionally add the "S" flag to wrap the output in a
	pay\-to\-script\-hash.
	.IP
	sign=SIGHASH\-FLAGS
	.IP
	Add zero or more signatures to transaction. This command requires JSON
	registers:prevtxs=JSON object, privatekeys=JSON object. See
	signrawtransaction docs for format of sighash flags, JSON
	objects.
	.PP
	Register Commands:
	.IP
	load=NAME:FILENAME
	.IP
	Load JSON file FILENAME into register NAME
	.IP
	set=NAME:JSON\-STRING
	.IP
	Set register NAME to given JSON\-STRING
	.SH COPYRIGHT
	Copyright (C) 2009-2019 The Bitcoin developers

	Please contribute if you find Bitcoin ABC useful. Visit
	<https://www.bitcoinabc.org> for further information about the software.
	The source code is available from <https://github.com/Bitcoin-ABC/bitcoin-abc>.

	This is experimental software.
	Distributed under the MIT software license, see the accompanying file COPYING
	or <https://opensource.org/licenses/MIT>

	This product includes software developed by the OpenSSL Project for use in the
	OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
	Eric Young and UPnP software written by Thomas Bernard.
	diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1
	index ae6d54183e..80a4ab0343 100644
	--- a/doc/man/bitcoind.1
	+++ b/doc/man/bitcoind.1
	@@ -1,544 +1,548 @@
	-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3.
	-.TH BITCOIND "1" "May 2019" "bitcoind v0.19.5.0" "User Commands"
	+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.6.
	+.TH BITCOIND "1" "May 2019" "bitcoind v0.19.6.0" "User Commands"
	.SH NAME
	-bitcoind \- manual page for bitcoind v0.19.5.0
	+bitcoind \- manual page for bitcoind v0.19.6.0
	.SH DESCRIPTION
	-Bitcoin ABC Daemon version v0.19.5.0
	+Bitcoin ABC Daemon version v0.19.6.0
	.SS "Usage:"
	.TP
	bitcoind [options]
	Start Bitcoin ABC Daemon
	.SH OPTIONS
	.HP
	\-?
	.IP
	Print this help message and exit
	.HP
	\fB\-version\fR
	.IP
	Print version and exit
	.HP
	\fB\-alertnotify=\fR<cmd>
	.IP
	Execute command when a relevant alert is received or we see a really
	long fork (%s in cmd is replaced by message)
	.HP
	+\fB\-blocksdir=\fR<dir>
	+.IP
	+Specify blocks directory (default: <datadir>/blocks)
	+.HP
	\fB\-blocknotify=\fR<cmd>
	.IP
	Execute command when the best block changes (%s in cmd is replaced by
	block hash)
	.HP
	\fB\-assumevalid=\fR<hex>
	.IP
	If this block is in the chain assume that it and its ancestors are valid
	and potentially skip their script verification (0 to verify all,
	default:
	-00000000000000000042fdb6b3730df1508a405ef98b1bdb857d4238b1c0a597,
	+000000000000000001b4b8e36aec7d4f9671a47872cb9a74dc16ca398c7dcc18,
	testnet:
	00000000000002cb911c0a756a24c2fe6c1a29acaede3569ce430b95d8ff012d)
	.HP
	\fB\-conf=\fR<file>
	.IP
	Specify configuration file (default: bitcoin.conf)
	.HP
	\fB\-daemon\fR
	.IP
	Run in the background as a daemon and accept commands
	.HP
	\fB\-datadir=\fR<dir>
	.IP
	Specify data directory
	.HP
	\fB\-dbcache=\fR<n>
	.IP
	Set database cache size in megabytes (4 to 16384, default: 450)
	.HP
	\fB\-finalizationdelay=\fR<n>
	.IP
	Set the minimum amount of time to wait between a block header reception
	and the block finalization. Unit is seconds (default: 7200)
	.HP
	\fB\-maxreorgdepth=\fR<n>
	.IP
	Configure at what depth blocks are considered final (default: 10). Use
	\fB\-1\fR to disable.
	.HP
	\fB\-loadblock=\fR<file>
	.IP
	Imports blocks from external blk000??.dat file on startup
	.HP
	\fB\-debuglogfile=\fR<file>
	.IP
	Specify location of debug log file: this can be an absolute path or a
	path relative to the data directory (default: debug.log)
	.HP
	\fB\-maxorphantx=\fR<n>
	.IP
	Keep at most <n> unconnectable transactions in memory (default: 100)
	.HP
	\fB\-maxmempool=\fR<n>
	.IP
	Keep the transaction memory pool below <n> megabytes (default: 300)
	.HP
	\fB\-mempoolexpiry=\fR<n>
	.IP
	Do not keep transactions in the mempool longer than <n> hours (default:
	336)
	.HP
	\fB\-persistmempool\fR
	.IP
	Whether to save the mempool on shutdown and load on restart (default: 1)
	.HP
	\fB\-blockreconstructionextratxn=\fR<n>
	.IP
	Extra transactions to keep in memory for compact block reconstructions
	(default: 100)
	.HP
	\fB\-par=\fR<n>
	.IP
	-Set the number of script verification threads (\fB\-4\fR to 16, 0 = auto, <0 =
	+Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 =
	leave that many cores free, default: 0)
	.HP
	\fB\-pid=\fR<file>
	.IP
	Specify pid file (default: bitcoind.pid)
	.HP
	\fB\-prune=\fR<n>
	.IP
	Reduce storage requirements by enabling pruning (deleting) of old
	blocks. This allows the pruneblockchain RPC to be called to
	delete specific blocks, and enables automatic pruning of old
	blocks if a target size in MiB is provided. This mode is
	incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
	setting requires re\-downloading the entire blockchain. (default:
	0 = disable pruning blocks, 1 = allow manual pruning via RPC,
	>550 = automatically prune block files to stay under the
	specified target size in MiB)
	.HP
	\fB\-reindex\-chainstate\fR
	.IP
	Rebuild chain state from the currently indexed blocks
	.HP
	\fB\-reindex\fR
	.IP
	Rebuild chain state and block index from the blk*.dat files on disk
	.HP
	\fB\-sysperms\fR
	.IP
	Create new files with system default permissions, instead of umask 077
	(only effective with disabled wallet functionality)
	.HP
	\fB\-txindex\fR
	.IP
	Maintain a full transaction index, used by the getrawtransaction rpc
	call (default: 0)
	.HP
	\fB\-usecashaddr\fR
	.IP
	Use Cash Address for destination encoding instead of base58 (activate by
	default on Jan, 14)
	.PP
	Connection options:
	.HP
	\fB\-addnode=\fR<ip>
	.IP
	Add a node to connect to and attempt to keep the connection open (see
	the `addnode` RPC command help for more info)
	.HP
	\fB\-banscore=\fR<n>
	.IP
	Threshold for disconnecting misbehaving peers (default: 100)
	.HP
	\fB\-bantime=\fR<n>
	.IP
	Number of seconds to keep misbehaving peers from reconnecting (default:
	86400)
	.HP
	\fB\-bind=\fR<addr>
	.IP
	Bind to given address and always listen on it. Use [host]:port notation
	for IPv6
	.HP
	\fB\-connect=\fR<ip>
	.IP
	Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic
	connections (the rules for this peer are the same as for
	\fB\-addnode\fR)
	.HP
	\fB\-discover\fR
	.IP
	Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
	or \fB\-proxy\fR)
	.HP
	\fB\-dns\fR
	.IP
	Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
	.HP
	\fB\-dnsseed\fR
	.IP
	Query for peer addresses via DNS lookup, if low on addresses (default: 1
	unless \fB\-connect\fR/\-noconnect)
	.HP
	\fB\-externalip=\fR<ip>
	.IP
	Specify your own public address
	.HP
	\fB\-forcednsseed\fR
	.IP
	Always query for peer addresses via DNS lookup (default: 0)
	.HP
	\fB\-listen\fR
	.IP
	Accept connections from outside (default: 1 if no \fB\-proxy\fR or
	\fB\-connect\fR/\-noconnect)
	.HP
	\fB\-listenonion\fR
	.IP
	Automatically create Tor hidden service (default: 1)
	.HP
	\fB\-maxconnections=\fR<n>
	.IP
	Maintain at most <n> connections to peers (default: 125)
	.HP
	\fB\-maxreceivebuffer=\fR<n>
	.IP
	Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
	.HP
	\fB\-maxsendbuffer=\fR<n>
	.IP
	Maximum per\-connection send buffer, <n>*1000 bytes (default: 1000)
	.HP
	\fB\-maxtimeadjustment\fR
	.IP
	Maximum allowed median peer time offset adjustment. Local perspective of
	time may be influenced by peers forward or backward by this
	amount. (default: 4200 seconds)
	.HP
	\fB\-onion=\fR<ip:port>
	.IP
	Use separate SOCKS5 proxy to reach peers via Tor hidden services
	(default: \fB\-proxy\fR)
	.HP
	\fB\-onlynet=\fR<net>
	.IP
	Only connect to nodes in network <net> (ipv4, ipv6 or onion)
	.HP
	\fB\-permitbaremultisig\fR
	.IP
	Relay non\-P2SH multisig (default: 1)
	.HP
	\fB\-peerbloomfilters\fR
	.IP
	Support filtering of blocks and transaction with bloom filters (default:
	1)
	.HP
	\fB\-port=\fR<port>
	.IP
	Listen for connections on <port> (default: 8333 or testnet: 18333)
	.HP
	\fB\-proxy=\fR<ip:port>
	.IP
	Connect through SOCKS5 proxy
	.HP
	\fB\-proxyrandomize\fR
	.IP
	Randomize credentials for every proxy connection. This enables Tor
	stream isolation (default: 1)
	.HP
	\fB\-seednode=\fR<ip>
	.IP
	Connect to a node to retrieve peer addresses, and disconnect
	.HP
	\fB\-timeout=\fR<n>
	.IP
	Specify connection timeout in milliseconds (minimum: 1, default: 5000)
	.HP
	\fB\-torcontrol=\fR<ip>:<port>
	.IP
	Tor control port to use if onion listening enabled (default:
	127.0.0.1:9051)
	.HP
	\fB\-torpassword=\fR<pass>
	.IP
	Tor control port password (default: empty)
	.HP
	\fB\-upnp\fR
	.IP
	Use UPnP to map the listening port (default: 0)
	.HP
	\fB\-whitebind=\fR<addr>
	.IP
	Bind to given address and whitelist peers connecting to it. Use
	[host]:port notation for IPv6
	.HP
	\fB\-whitelist=\fR<IP address or network>
	.IP
	Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
	CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
	times. Whitelisted peers cannot be DoS banned and their
	transactions are always relayed, even if they are already in the
	mempool, useful e.g. for a gateway
	.HP
	\fB\-whitelistrelay\fR
	.IP
	Accept relayed transactions received from whitelisted peers even when
	not relaying transactions (default: 1)
	.HP
	\fB\-whitelistforcerelay\fR
	.IP
	Force relay of transactions from whitelisted peers even if they violate
	local relay policy (default: 1)
	.HP
	\fB\-maxuploadtarget=\fR<n>
	.IP
	Tries to keep outbound traffic under the given target (in MiB per 24h),
	0 = no limit (default: 0)
	.PP
	Wallet options:
	.HP
	\fB\-disablewallet\fR
	.IP
	Do not load the wallet and disable wallet RPC calls
	.HP
	\fB\-keypool=\fR<n>
	.IP
	Set key pool size to <n> (default: 1000)
	.HP
	\fB\-fallbackfee=\fR<amt>
	.IP
	A fee rate (in BCH/kB) that will be used when fee estimation has
	insufficient data (default: 0.0002)
	.HP
	\fB\-paytxfee=\fR<amt>
	.IP
	Fee (in BCH/kB) to add to transactions you send (default: 0.00)
	.HP
	\fB\-rescan\fR
	.IP
	Rescan the block chain for missing wallet transactions on startup
	.HP
	\fB\-salvagewallet\fR
	.IP
	Attempt to recover private keys from a corrupt wallet on startup
	.HP
	\fB\-spendzeroconfchange\fR
	.IP
	Spend unconfirmed change when sending transactions (default: 1)
	.HP
	\fB\-usehd\fR
	.IP
	Use hierarchical deterministic key generation (HD) after BIP32. Only has
	effect during wallet creation/first start (default: 1)
	.HP
	\fB\-upgradewallet\fR
	.IP
	Upgrade wallet to latest format on startup
	.HP
	\fB\-wallet=\fR<file>
	.IP
	Specify wallet file (within data directory) (default: wallet.dat)
	.HP
	\fB\-walletbroadcast\fR
	.IP
	Make the wallet broadcast transactions (default: 1)
	.HP
	\fB\-walletdir=\fR<dir>
	.IP
	Specify directory to hold wallets (default: <datadir>/wallets if it
	exists, otherwise <datadir>)
	.HP
	\fB\-walletnotify=\fR<cmd>
	.IP
	Execute command when a wallet transaction changes (%s in cmd is replaced
	by TxID)
	.HP
	\fB\-zapwallettxes=\fR<mode>
	.IP
	Delete all wallet transactions and only recover those parts of the
	blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
	account owner and payment request information, 2 = drop tx meta
	data)
	.PP
	ZeroMQ notification options:
	.HP
	\fB\-zmqpubhashblock=\fR<address>
	.IP
	Enable publish hash block in <address>
	.HP
	\fB\-zmqpubhashtx=\fR<address>
	.IP
	Enable publish hash transaction in <address>
	.HP
	\fB\-zmqpubrawblock=\fR<address>
	.IP
	Enable publish raw block in <address>
	.HP
	\fB\-zmqpubrawtx=\fR<address>
	.IP
	Enable publish raw transaction in <address>
	.PP
	Debugging/Testing options:
	.HP
	\fB\-uacomment=\fR<cmt>
	.IP
	Append comment to the user agent string
	.HP
	\fB\-debug=\fR<category>
	.IP
	Output debugging information (default: 0, supplying <category> is
	optional). If <category> is not supplied or if <category> = 1,
	output all debugging information.<category> can be: net, tor,
	mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
	selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
	libevent, coindb, qt, leveldb.
	.HP
	\fB\-debugexclude=\fR<category>
	.IP
	Exclude debugging information for a category. Can be used in conjunction
	with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
	or more specified categories.
	.HP
	\fB\-help\-debug\fR
	.IP
	Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR)
	.HP
	\fB\-logips\fR
	.IP
	Include IP addresses in debug output (default: 0)
	.HP
	\fB\-logtimestamps\fR
	.IP
	Prepend debug output with timestamp (default: 1)
	.HP
	\fB\-excessutxocharge=\fR<amt>
	.IP
	Fees (in BCH/kB) to charge per utxo created forrelaying, and mining
	(default: 0.00)
	.HP
	\fB\-minrelaytxfee=\fR<amt>
	.IP
	Fees (in BCH/kB) smaller than this are considered zero fee for relaying,
	mining and transaction creation (default: 0.00001)
	.HP
	\fB\-maxtxfee=\fR<amt>
	.IP
	Maximum total fees (in BCH) to use in a single wallet transaction or raw
	transaction; setting this too low may abort large transactions
	(default: 0.10)
	.HP
	\fB\-printtoconsole\fR
	.IP
	Send trace/debug info to console instead of debug.log file
	.HP
	\fB\-shrinkdebugfile\fR
	.IP
	Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
	.PP
	Chain selection options:
	.HP
	\fB\-testnet\fR
	.IP
	Use the test chain
	.PP
	Node relay options:
	.HP
	\fB\-bytespersigop\fR
	.IP
	Equivalent bytes per sigop in transactions for relay and mining
	(default: 20)
	.HP
	\fB\-datacarrier\fR
	.IP
	Relay and mine data carrier transactions (default: 1)
	.HP
	\fB\-datacarriersize\fR
	.IP
	Maximum size of data in data carrier transactions we relay and mine
	(default: 223)
	.PP
	Block creation options:
	.HP
	\fB\-blockmaxsize=\fR<n>
	.IP
	Set maximum block size in bytes (default: 2000000)
	.HP
	\fB\-blockprioritypercentage=\fR<n>
	.IP
	Set maximum percentage of a block reserved to high\-priority/low\-fee
	transactions (default: 5)
	.HP
	\fB\-blockmintxfee=\fR<amt>
	.IP
	Set lowest fee rate (in BCH/kB) for transactions to be included in block
	creation. (default: 0.00001)
	.PP
	RPC server options:
	.HP
	\fB\-server\fR
	.IP
	Accept command line and JSON\-RPC commands
	.HP
	\fB\-rest\fR
	.IP
	Accept public REST requests (default: 0)
	.HP
	\fB\-rpcbind=\fR<addr>
	.IP
	Bind to given address to listen for JSON\-RPC connections. Use
	[host]:port notation for IPv6. This option can be specified
	multiple times (default: bind to all interfaces)
	.HP
	\fB\-rpccookiefile=\fR<loc>
	.IP
	Location of the auth cookie (default: data dir)
	.HP
	\fB\-rpcuser=\fR<user>
	.IP
	Username for JSON\-RPC connections
	.HP
	\fB\-rpcpassword=\fR<pw>
	.IP
	Password for JSON\-RPC connections
	.HP
	\fB\-rpcauth=\fR<userpw>
	.IP
	Username and hashed password for JSON\-RPC connections. The field
	<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
	canonical python script is included in share/rpcuser. The client
	then connects normally using the
	rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
	option can be specified multiple times
	.HP
	\fB\-rpcport=\fR<port>
	.IP
	Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
	18332)
	.HP
	\fB\-rpcallowip=\fR<ip>
	.IP
	Allow JSON\-RPC connections from specified source. Valid for <ip> are a
	single IP (e.g. 1.2.3.4), a network/netmask (e.g.
	1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
	option can be specified multiple times
	.HP
	\fB\-rpcthreads=\fR<n>
	.IP
	Set the number of threads to service RPC calls (default: 4)
	.HP
	\fB\-rpccorsdomain\fR=\fI\,value\/\fR
	.IP
	Domain from which to accept cross origin requests (browser enforced)
	.SH COPYRIGHT
	Copyright (C) 2009-2019 The Bitcoin developers

	Please contribute if you find Bitcoin ABC useful. Visit
	<https://www.bitcoinabc.org> for further information about the software.
	The source code is available from <https://github.com/Bitcoin-ABC/bitcoin-abc>.

	This is experimental software.
	Distributed under the MIT software license, see the accompanying file COPYING
	or <https://opensource.org/licenses/MIT>

	This product includes software developed by the OpenSSL Project for use in the
	OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
	Eric Young and UPnP software written by Thomas Bernard.

File Metadata

Mime Type: text/x-diff
Expires: Thu, May 22, 00:27 (1 d, 1 h)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 5866212
Default Alt Text: (37 KB)

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions