diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1 index a03e84cf5..9b5a6b69b 100644 --- a/doc/man/bitcoin-cli.1 +++ b/doc/man/bitcoin-cli.1 @@ -1,104 +1,104 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. -.TH BITCOIN-CLI "1" "June 2019" "bitcoin-cli v0.19.9.0" "User Commands" +.TH BITCOIN-CLI "1" "July 2019" "bitcoin-cli v0.19.10.0" "User Commands" .SH NAME -bitcoin-cli \- manual page for bitcoin-cli v0.19.9.0 +bitcoin-cli \- manual page for bitcoin-cli v0.19.10.0 .SH SYNOPSIS .B bitcoin-cli [\fI\,options\/\fR] \fI\, \/\fR[\fI\,params\/\fR] \fI\,Send command to Bitcoin ABC\/\fR .br .B bitcoin-cli [\fI\,options\/\fR] \fI\,-named \/\fR[\fI\,name=value\/\fR]... \fI\,Send command to Bitcoin ABC (with named arguments)\/\fR .br .B bitcoin-cli [\fI\,options\/\fR] \fI\,help List commands\/\fR .br .B bitcoin-cli [\fI\,options\/\fR] \fI\,help Get help for a command\/\fR .SH DESCRIPTION -Bitcoin ABC RPC client version v0.19.9.0 +Bitcoin ABC RPC client version v0.19.10.0 .SH OPTIONS .HP \-? .IP This help message .HP \fB\-conf=\fR .IP Specify configuration file (default: bitcoin.conf) .HP \fB\-datadir=\fR .IP Specify data directory .HP \fB\-getinfo\fR .IP Get general information from the remote server. Note that unlike server\-side RPC calls, the results of \fB\-getinfo\fR is the result of multiple non\-atomic requests. Some entries in the result may represent results from different states (e.g. wallet balance may be as of a different block from the chain state reported) .HP \fB\-named\fR .IP Pass named instead of positional arguments (default: false) .HP \fB\-rpcclienttimeout=\fR .IP Timeout in seconds during HTTP requests, or 0 for no timeout. (default: 900) .HP \fB\-rpcconnect=\fR .IP Send commands to node running on (default: 127.0.0.1) .HP \fB\-rpcpassword=\fR .IP Password for JSON\-RPC connections .HP \fB\-rpcport=\fR .IP Connect to JSON\-RPC on (default: 8332 or testnet: 18332) .HP \fB\-rpcuser=\fR .IP Username for JSON\-RPC connections .HP \fB\-rpcwait\fR .IP Wait for RPC server to start .HP \fB\-rpcwallet=\fR .IP Send RPC for non\-default wallet on RPC server (needs to exactly match corresponding \fB\-wallet\fR option passed to bitcoind) .HP \fB\-stdin\fR .IP Read extra arguments from standard input, one per line until EOF/Ctrl\-D (recommended for sensitive information such as passphrases) .HP \fB\-stdinrpcpass\fR .IP Read RPC password from standard input as a single line. When combined with \fB\-stdin\fR, the first line from standard input is used for the RPC password. .PP Chain selection options: .HP \fB\-testnet\fR .IP Use the test chain .SH COPYRIGHT Copyright (C) 2009-2019 The Bitcoin developers Please contribute if you find Bitcoin ABC useful. Visit for further information about the software. The source code is available from . This is experimental software. Distributed under the MIT software license, see the accompanying file COPYING or This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1 index 0392c02f8..7af0337c4 100644 --- a/doc/man/bitcoin-qt.1 +++ b/doc/man/bitcoin-qt.1 @@ -1,583 +1,583 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. -.TH BITCOIN-QT "1" "June 2019" "bitcoin-qt v0.19.9.0" "User Commands" +.TH BITCOIN-QT "1" "July 2019" "bitcoin-qt v0.19.10.0" "User Commands" .SH NAME -bitcoin-qt \- manual page for bitcoin-qt v0.19.9.0 +bitcoin-qt \- manual page for bitcoin-qt v0.19.10.0 .SH SYNOPSIS .B bitcoin-qt [\fI\,command-line options\/\fR] .SH DESCRIPTION -Bitcoin ABC version v0.19.9.0 (64\-bit) +Bitcoin ABC version v0.19.10.0 (64\-bit) .SH OPTIONS .HP \-? .IP Print this help message and exit .HP \fB\-alertnotify=\fR .IP Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) .HP \fB\-assumevalid=\fR .IP If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: -00000000000000000401095ca2933cc4729484965e66e6a9f8e937070cc8e971, +000000000000000004425aeeb553758650da20031643fbfff0f53ac5dd1b39c3, testnet: -00000000001b618c015c41cc218a60a5a94bc42e16e30f1426cfc138615201c3) +000000000000037b3419370d2306ada6b4f30ac9f01a1bec513eef69b8cd4eab) .HP \fB\-blocknotify=\fR .IP Execute command when the best block changes (%s in cmd is replaced by block hash) .HP \fB\-blockreconstructionextratxn=\fR .IP Extra transactions to keep in memory for compact block reconstructions (default: 100) .HP \fB\-blocksdir=\fR .IP Specify directory to hold blocks subdirectory for *.dat files (default: ) .HP \fB\-conf=\fR .IP Specify configuration file (default: bitcoin.conf) .HP \fB\-datadir=\fR .IP Specify data directory .HP \fB\-dbcache=\fR .IP Set database cache size in megabytes (4 to 16384, default: 450) .HP \fB\-debuglogfile=\fR .IP Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: debug.log) .HP \fB\-finalizationdelay=\fR .IP Set the minimum amount of time to wait between a block header reception and the block finalization. Unit is seconds (default: 7200) .HP \fB\-includeconf=\fR .IP Specify additional configuration file, relative to the \fB\-datadir\fR path (only useable from configuration file, not command line) .HP \fB\-loadblock=\fR .IP Imports blocks from external blk000??.dat file on startup .HP \fB\-maxmempool=\fR .IP Keep the transaction memory pool below megabytes (default: 300) .HP \fB\-maxorphantx=\fR .IP Keep at most unconnectable transactions in memory (default: 100) .HP \fB\-maxreorgdepth=\fR .IP Configure at what depth blocks are considered final (default: 10). Use \fB\-1\fR to disable. .HP \fB\-mempoolexpiry=\fR .IP Do not keep transactions in the mempool longer than hours (default: 336) .HP \fB\-par=\fR .IP Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 = leave that many cores free, default: 0) .HP \fB\-persistmempool\fR .IP Whether to save the mempool on shutdown and load on restart (default: 1) .HP \fB\-pid=\fR .IP Specify pid file (default: bitcoind.pid) .HP \fB\-prune=\fR .IP Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this setting requires re\-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >550 = automatically prune block files to stay under the specified target size in MiB) .HP \fB\-reindex\fR .IP Rebuild chain state and block index from the blk*.dat files on disk .HP \fB\-reindex\-chainstate\fR .IP Rebuild chain state from the currently indexed blocks .HP \fB\-sysperms\fR .IP Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) .HP \fB\-txindex\fR .IP Maintain a full transaction index, used by the getrawtransaction rpc call (default: 0) .HP \fB\-usecashaddr\fR .IP Use Cash Address for destination encoding instead of base58 (activate by default on Jan, 14) .HP \fB\-version\fR .IP Print version and exit .PP Connection options: .HP \fB\-addnode=\fR .IP Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info) .HP \fB\-banscore=\fR .IP Threshold for disconnecting misbehaving peers (default: 100) .HP \fB\-bantime=\fR .IP Number of seconds to keep misbehaving peers from reconnecting (default: 86400) .HP \fB\-bind=\fR .IP Bind to given address and always listen on it. Use [host]:port notation for IPv6 .HP \fB\-connect=\fR .IP Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic connections (the rules for this peer are the same as for \fB\-addnode\fR) .HP \fB\-discover\fR .IP Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR or \fB\-proxy\fR) .HP \fB\-dns\fR .IP Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1) .HP \fB\-dnsseed\fR .IP Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless \fB\-connect\fR/\-noconnect) .HP \fB\-externalip=\fR .IP Specify your own public address .HP \fB\-forcednsseed\fR .IP Always query for peer addresses via DNS lookup (default: 0) .HP \fB\-listen\fR .IP Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR/\-noconnect) .HP \fB\-listenonion\fR .IP Automatically create Tor hidden service (default: 1) .HP \fB\-maxconnections=\fR .IP Maintain at most connections to peers (default: 125) .HP \fB\-maxreceivebuffer=\fR .IP Maximum per\-connection receive buffer, *1000 bytes (default: 5000) .HP \fB\-maxsendbuffer=\fR .IP Maximum per\-connection send buffer, *1000 bytes (default: 1000) .HP \fB\-maxtimeadjustment\fR .IP Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: 4200 seconds) .HP \fB\-maxuploadtarget=\fR .IP Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: 0) .HP \fB\-onion=\fR .IP Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: \fB\-proxy\fR) .HP \fB\-onlynet=\fR .IP Only connect to nodes in network (ipv4, ipv6 or onion) .HP \fB\-peerbloomfilters\fR .IP Support filtering of blocks and transaction with bloom filters (default: 1) .HP \fB\-permitbaremultisig\fR .IP Relay non\-P2SH multisig (default: 1) .HP \fB\-port=\fR .IP Listen for connections on (default: 8333 or testnet: 18333) .HP \fB\-proxy=\fR .IP Connect through SOCKS5 proxy .HP \fB\-proxyrandomize\fR .IP Randomize credentials for every proxy connection. This enables Tor stream isolation (default: 1) .HP \fB\-seednode=\fR .IP Connect to a node to retrieve peer addresses, and disconnect .HP \fB\-timeout=\fR .IP Specify connection timeout in milliseconds (minimum: 1, default: 5000) .HP \fB\-torcontrol=\fR: .IP Tor control port to use if onion listening enabled (default: 127.0.0.1:9051) .HP \fB\-torpassword=\fR .IP Tor control port password (default: empty) .HP \fB\-upnp\fR .IP Use UPnP to map the listening port (default: 0) .HP \fB\-whitebind=\fR .IP Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 .HP \fB\-whitelist=\fR .IP Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times. Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway .PP Wallet options: .HP \fB\-avoidpartialspends\fR .IP Group outputs by address, selecting all or none, instead of selecting on a per\-output basis. Privacy is improved as an address is only used once (unless someone sends to it after spending from it), but may result in slightly higher fees as suboptimal coin selection may result due to the added limitation (default: 0) .HP \fB\-disablewallet\fR .IP Do not load the wallet and disable wallet RPC calls .HP \fB\-fallbackfee=\fR .IP A fee rate (in BCH/kB) that will be used when fee estimation has insufficient data (default: 0.0002) .HP \fB\-keypool=\fR .IP Set key pool size to (default: 1000) .HP \fB\-mintxfee=\fR .IP Fees (in BCH/kB) smaller than this are considered zero fee for transaction creation (default: 0.00001) .HP \fB\-paytxfee=\fR .IP Fee (in BCH/kB) to add to transactions you send (default: 0.00) .HP \fB\-rescan\fR .IP Rescan the block chain for missing wallet transactions on startup .HP \fB\-salvagewallet\fR .IP Attempt to recover private keys from a corrupt wallet on startup .HP \fB\-spendzeroconfchange\fR .IP Spend unconfirmed change when sending transactions (default: 1) .HP \fB\-upgradewallet\fR .IP Upgrade wallet to latest format on startup .HP \fB\-wallet=\fR .IP Specify wallet database path. Can be specified multiple times to load multiple wallets. Path is interpreted relative to if it is not absolute, and will be created if it does not exist (as a directory containing a wallet.dat file and log files). For backwards compatibility this will also accept names of existing data files in .) .HP \fB\-walletbroadcast\fR .IP Make the wallet broadcast transactions (default: 1) .HP \fB\-walletdir=\fR .IP Specify directory to hold wallets (default: /wallets if it exists, otherwise ) .HP \fB\-walletnotify=\fR .IP Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) .HP \fB\-zapwallettxes=\fR .IP Delete all wallet transactions and only recover those parts of the blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) .PP ZeroMQ notification options: .HP \fB\-zmqpubhashblock=\fR
.IP Enable publish hash block in
.HP \fB\-zmqpubhashtx=\fR
.IP Enable publish hash transaction in
.HP \fB\-zmqpubrawblock=\fR
.IP Enable publish raw block in
.HP \fB\-zmqpubrawtx=\fR
.IP Enable publish raw transaction in
.PP Debugging/Testing options: .HP \fB\-debug=\fR .IP Output debugging information (default: 0, supplying is optional). If is not supplied or if = 1, output all debugging information. can be: net, tor, mempool, http, bench, zmq, db, rpc, estimatefee, addrman, selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej, libevent, coindb, qt, leveldb. .HP \fB\-debugexclude=\fR .IP Exclude debugging information for a category. Can be used in conjunction with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one or more specified categories. .HP \fB\-help\-debug\fR .IP Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR) .HP \fB\-logips\fR .IP Include IP addresses in debug output (default: 0) .HP \fB\-logtimestamps\fR .IP Prepend debug output with timestamp (default: 1) .HP \fB\-maxtxfee=\fR .IP Maximum total fees (in BCH) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: 0.10) .HP \fB\-printtoconsole\fR .IP Send trace/debug info to console instead of debug.log file .HP \fB\-shrinkdebugfile\fR .IP Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR) .HP \fB\-uacomment=\fR .IP Append comment to the user agent string .PP Chain selection options: .HP \fB\-testnet\fR .IP Use the test chain .PP Node relay options: .HP \fB\-bytespersigop\fR .IP Equivalent bytes per sigop in transactions for relay and mining (default: 20) .HP \fB\-datacarrier\fR .IP Relay and mine data carrier transactions (default: 1) .HP \fB\-datacarriersize\fR .IP Maximum size of data in data carrier transactions we relay and mine (default: 223) .HP \fB\-minrelaytxfee=\fR .IP Fees (in BCH/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: 0.00001) .HP \fB\-whitelistforcerelay\fR .IP Force relay of transactions from whitelisted peers even if they violate local relay policy (default: 1) .HP \fB\-whitelistrelay\fR .IP Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: 1) .PP Block creation options: .HP \fB\-blockmaxsize=\fR .IP Set maximum block size in bytes (default: 2000000) .HP \fB\-blockmintxfee=\fR .IP Set lowest fee rate (in BCH/kB) for transactions to be included in block creation. (default: 0.00001) .HP \fB\-blockprioritypercentage=\fR .IP Set maximum percentage of a block reserved to high\-priority/low\-fee transactions (default: 5) .PP RPC server options: .HP \fB\-rest\fR .IP Accept public REST requests (default: 0) .HP \fB\-rpcallowip=\fR .IP Allow JSON\-RPC connections from specified source. Valid for are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times .HP \fB\-rpcauth=\fR .IP Username and hashed password for JSON\-RPC connections. The field comes in the format: :$. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=/rpcpassword= pair of arguments. This option can be specified multiple times .HP \fB\-rpcbind=\fR .IP Bind to given address to listen for JSON\-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces) .HP \fB\-rpccookiefile=\fR .IP Location of the auth cookie (default: data dir) .HP \fB\-rpccorsdomain\fR=\fI\,value\/\fR .IP Domain from which to accept cross origin requests (browser enforced) .HP \fB\-rpcpassword=\fR .IP Password for JSON\-RPC connections .HP \fB\-rpcport=\fR .IP Listen for JSON\-RPC connections on (default: 8332 or testnet: 18332) .HP \fB\-rpcthreads=\fR .IP Set the number of threads to service RPC calls (default: 4) .HP \fB\-rpcuser=\fR .IP Username for JSON\-RPC connections .HP \fB\-server\fR .IP Accept command line and JSON\-RPC commands .PP UI Options: .HP \fB\-choosedatadir\fR .IP Choose data directory on startup (default: 0) .HP \fB\-lang=\fR .IP Set language, for example "de_DE" (default: system locale) .HP \fB\-min\fR .IP Start minimized .HP \fB\-resetguisettings\fR .IP Reset all settings changed in the GUI .HP \fB\-rootcertificates=\fR .IP Set SSL root certificates for payment request (default: \fB\-system\-\fR) .HP \fB\-splash\fR .IP Show splash screen on startup (default: 1) .SH COPYRIGHT Copyright (C) 2009-2019 The Bitcoin developers Please contribute if you find Bitcoin ABC useful. Visit for further information about the software. The source code is available from . This is experimental software. Distributed under the MIT software license, see the accompanying file COPYING or This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1 index 3a1011619..2f46f7682 100644 --- a/doc/man/bitcoin-tx.1 +++ b/doc/man/bitcoin-tx.1 @@ -1,112 +1,112 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. -.TH BITCOIN-TX "1" "June 2019" "bitcoin-tx v0.19.9.0" "User Commands" +.TH BITCOIN-TX "1" "July 2019" "bitcoin-tx v0.19.10.0" "User Commands" .SH NAME -bitcoin-tx \- manual page for bitcoin-tx v0.19.9.0 +bitcoin-tx \- manual page for bitcoin-tx v0.19.10.0 .SH SYNOPSIS .B bitcoin-tx [\fI\,options\/\fR] \fI\, \/\fR[\fI\,commands\/\fR] \fI\,Update hex-encoded bitcoin transaction\/\fR .br .B bitcoin-tx [\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR] \fI\,Create hex-encoded bitcoin transaction\/\fR .SH DESCRIPTION -Bitcoin ABC bitcoin\-tx utility version v0.19.9.0 +Bitcoin ABC bitcoin\-tx utility version v0.19.10.0 .SH OPTIONS .HP \-? .IP This help message .HP \fB\-create\fR .IP Create new, empty TX. .HP \fB\-json\fR .IP Select JSON output .HP \fB\-txid\fR .IP Output only the hex\-encoded transaction id of the resultant transaction. .PP Chain selection options: .HP \fB\-testnet\fR .IP Use the test chain .PP Commands: .IP delin=N .IP Delete input N from TX .IP delout=N .IP Delete output N from TX .IP in=TXID:VOUT(:SEQUENCE_NUMBER) .IP Add input to TX .IP locktime=N .IP Set TX lock time to N .IP nversion=N .IP Set TX version to N .IP outaddr=VALUE:ADDRESS .IP Add address\-based output to TX .IP outdata=[VALUE:]DATA .IP Add data\-based output to TX .IP outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS] .IP Add Pay To n\-of\-m Multi\-sig output to TX. n = REQUIRED, m = PUBKEYS. Optionally add the "S" flag to wrap the output in a pay\-to\-script\-hash. .IP outpubkey=VALUE:PUBKEY[:FLAGS] .IP Add pay\-to\-pubkey output to TX. Optionally add the "S" flag to wrap the output in a pay\-to\-script\-hash. .IP outscript=VALUE:SCRIPT[:FLAGS] .IP Add raw script output to TX. Optionally add the "S" flag to wrap the output in a pay\-to\-script\-hash. .IP sign=SIGHASH\-FLAGS .IP Add zero or more signatures to transaction. This command requires JSON registers:prevtxs=JSON object, privatekeys=JSON object. See signrawtransaction docs for format of sighash flags, JSON objects. .PP Register Commands: .IP load=NAME:FILENAME .IP Load JSON file FILENAME into register NAME .IP set=NAME:JSON\-STRING .IP Set register NAME to given JSON\-STRING .SH COPYRIGHT Copyright (C) 2009-2019 The Bitcoin developers Please contribute if you find Bitcoin ABC useful. Visit for further information about the software. The source code is available from . This is experimental software. Distributed under the MIT software license, see the accompanying file COPYING or This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1 index cd98622fa..e37c00629 100644 --- a/doc/man/bitcoind.1 +++ b/doc/man/bitcoind.1 @@ -1,561 +1,561 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.3. -.TH BITCOIND "1" "June 2019" "bitcoind v0.19.9.0" "User Commands" +.TH BITCOIND "1" "July 2019" "bitcoind v0.19.10.0" "User Commands" .SH NAME -bitcoind \- manual page for bitcoind v0.19.9.0 +bitcoind \- manual page for bitcoind v0.19.10.0 .SH SYNOPSIS .B bitcoind [\fI\,options\/\fR] \fI\,Start Bitcoin ABC Daemon\/\fR .SH DESCRIPTION -Bitcoin ABC Daemon version v0.19.9.0 +Bitcoin ABC Daemon version v0.19.10.0 .SH OPTIONS .HP \-? .IP Print this help message and exit .HP \fB\-alertnotify=\fR .IP Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) .HP \fB\-assumevalid=\fR .IP If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: -00000000000000000401095ca2933cc4729484965e66e6a9f8e937070cc8e971, +000000000000000004425aeeb553758650da20031643fbfff0f53ac5dd1b39c3, testnet: -00000000001b618c015c41cc218a60a5a94bc42e16e30f1426cfc138615201c3) +000000000000037b3419370d2306ada6b4f30ac9f01a1bec513eef69b8cd4eab) .HP \fB\-blocknotify=\fR .IP Execute command when the best block changes (%s in cmd is replaced by block hash) .HP \fB\-blockreconstructionextratxn=\fR .IP Extra transactions to keep in memory for compact block reconstructions (default: 100) .HP \fB\-blocksdir=\fR .IP Specify directory to hold blocks subdirectory for *.dat files (default: ) .HP \fB\-conf=\fR .IP Specify configuration file (default: bitcoin.conf) .HP \fB\-daemon\fR .IP Run in the background as a daemon and accept commands .HP \fB\-datadir=\fR .IP Specify data directory .HP \fB\-dbcache=\fR .IP Set database cache size in megabytes (4 to 16384, default: 450) .HP \fB\-debuglogfile=\fR .IP Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: debug.log) .HP \fB\-finalizationdelay=\fR .IP Set the minimum amount of time to wait between a block header reception and the block finalization. Unit is seconds (default: 7200) .HP \fB\-includeconf=\fR .IP Specify additional configuration file, relative to the \fB\-datadir\fR path (only useable from configuration file, not command line) .HP \fB\-loadblock=\fR .IP Imports blocks from external blk000??.dat file on startup .HP \fB\-maxmempool=\fR .IP Keep the transaction memory pool below megabytes (default: 300) .HP \fB\-maxorphantx=\fR .IP Keep at most unconnectable transactions in memory (default: 100) .HP \fB\-maxreorgdepth=\fR .IP Configure at what depth blocks are considered final (default: 10). Use \fB\-1\fR to disable. .HP \fB\-mempoolexpiry=\fR .IP Do not keep transactions in the mempool longer than hours (default: 336) .HP \fB\-par=\fR .IP Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 = leave that many cores free, default: 0) .HP \fB\-persistmempool\fR .IP Whether to save the mempool on shutdown and load on restart (default: 1) .HP \fB\-pid=\fR .IP Specify pid file (default: bitcoind.pid) .HP \fB\-prune=\fR .IP Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this setting requires re\-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >550 = automatically prune block files to stay under the specified target size in MiB) .HP \fB\-reindex\fR .IP Rebuild chain state and block index from the blk*.dat files on disk .HP \fB\-reindex\-chainstate\fR .IP Rebuild chain state from the currently indexed blocks .HP \fB\-sysperms\fR .IP Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) .HP \fB\-txindex\fR .IP Maintain a full transaction index, used by the getrawtransaction rpc call (default: 0) .HP \fB\-usecashaddr\fR .IP Use Cash Address for destination encoding instead of base58 (activate by default on Jan, 14) .HP \fB\-version\fR .IP Print version and exit .PP Connection options: .HP \fB\-addnode=\fR .IP Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info) .HP \fB\-banscore=\fR .IP Threshold for disconnecting misbehaving peers (default: 100) .HP \fB\-bantime=\fR .IP Number of seconds to keep misbehaving peers from reconnecting (default: 86400) .HP \fB\-bind=\fR .IP Bind to given address and always listen on it. Use [host]:port notation for IPv6 .HP \fB\-connect=\fR .IP Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic connections (the rules for this peer are the same as for \fB\-addnode\fR) .HP \fB\-discover\fR .IP Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR or \fB\-proxy\fR) .HP \fB\-dns\fR .IP Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1) .HP \fB\-dnsseed\fR .IP Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless \fB\-connect\fR/\-noconnect) .HP \fB\-externalip=\fR .IP Specify your own public address .HP \fB\-forcednsseed\fR .IP Always query for peer addresses via DNS lookup (default: 0) .HP \fB\-listen\fR .IP Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR/\-noconnect) .HP \fB\-listenonion\fR .IP Automatically create Tor hidden service (default: 1) .HP \fB\-maxconnections=\fR .IP Maintain at most connections to peers (default: 125) .HP \fB\-maxreceivebuffer=\fR .IP Maximum per\-connection receive buffer, *1000 bytes (default: 5000) .HP \fB\-maxsendbuffer=\fR .IP Maximum per\-connection send buffer, *1000 bytes (default: 1000) .HP \fB\-maxtimeadjustment\fR .IP Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: 4200 seconds) .HP \fB\-maxuploadtarget=\fR .IP Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: 0) .HP \fB\-onion=\fR .IP Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: \fB\-proxy\fR) .HP \fB\-onlynet=\fR .IP Only connect to nodes in network (ipv4, ipv6 or onion) .HP \fB\-peerbloomfilters\fR .IP Support filtering of blocks and transaction with bloom filters (default: 1) .HP \fB\-permitbaremultisig\fR .IP Relay non\-P2SH multisig (default: 1) .HP \fB\-port=\fR .IP Listen for connections on (default: 8333 or testnet: 18333) .HP \fB\-proxy=\fR .IP Connect through SOCKS5 proxy .HP \fB\-proxyrandomize\fR .IP Randomize credentials for every proxy connection. This enables Tor stream isolation (default: 1) .HP \fB\-seednode=\fR .IP Connect to a node to retrieve peer addresses, and disconnect .HP \fB\-timeout=\fR .IP Specify connection timeout in milliseconds (minimum: 1, default: 5000) .HP \fB\-torcontrol=\fR: .IP Tor control port to use if onion listening enabled (default: 127.0.0.1:9051) .HP \fB\-torpassword=\fR .IP Tor control port password (default: empty) .HP \fB\-upnp\fR .IP Use UPnP to map the listening port (default: 0) .HP \fB\-whitebind=\fR .IP Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 .HP \fB\-whitelist=\fR .IP Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times. Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway .PP Wallet options: .HP \fB\-avoidpartialspends\fR .IP Group outputs by address, selecting all or none, instead of selecting on a per\-output basis. Privacy is improved as an address is only used once (unless someone sends to it after spending from it), but may result in slightly higher fees as suboptimal coin selection may result due to the added limitation (default: 0) .HP \fB\-disablewallet\fR .IP Do not load the wallet and disable wallet RPC calls .HP \fB\-fallbackfee=\fR .IP A fee rate (in BCH/kB) that will be used when fee estimation has insufficient data (default: 0.0002) .HP \fB\-keypool=\fR .IP Set key pool size to (default: 1000) .HP \fB\-mintxfee=\fR .IP Fees (in BCH/kB) smaller than this are considered zero fee for transaction creation (default: 0.00001) .HP \fB\-paytxfee=\fR .IP Fee (in BCH/kB) to add to transactions you send (default: 0.00) .HP \fB\-rescan\fR .IP Rescan the block chain for missing wallet transactions on startup .HP \fB\-salvagewallet\fR .IP Attempt to recover private keys from a corrupt wallet on startup .HP \fB\-spendzeroconfchange\fR .IP Spend unconfirmed change when sending transactions (default: 1) .HP \fB\-upgradewallet\fR .IP Upgrade wallet to latest format on startup .HP \fB\-wallet=\fR .IP Specify wallet database path. Can be specified multiple times to load multiple wallets. Path is interpreted relative to if it is not absolute, and will be created if it does not exist (as a directory containing a wallet.dat file and log files). For backwards compatibility this will also accept names of existing data files in .) .HP \fB\-walletbroadcast\fR .IP Make the wallet broadcast transactions (default: 1) .HP \fB\-walletdir=\fR .IP Specify directory to hold wallets (default: /wallets if it exists, otherwise ) .HP \fB\-walletnotify=\fR .IP Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) .HP \fB\-zapwallettxes=\fR .IP Delete all wallet transactions and only recover those parts of the blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) .PP ZeroMQ notification options: .HP \fB\-zmqpubhashblock=\fR
.IP Enable publish hash block in
.HP \fB\-zmqpubhashtx=\fR
.IP Enable publish hash transaction in
.HP \fB\-zmqpubrawblock=\fR
.IP Enable publish raw block in
.HP \fB\-zmqpubrawtx=\fR
.IP Enable publish raw transaction in
.PP Debugging/Testing options: .HP \fB\-debug=\fR .IP Output debugging information (default: 0, supplying is optional). If is not supplied or if = 1, output all debugging information. can be: net, tor, mempool, http, bench, zmq, db, rpc, estimatefee, addrman, selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej, libevent, coindb, qt, leveldb. .HP \fB\-debugexclude=\fR .IP Exclude debugging information for a category. Can be used in conjunction with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one or more specified categories. .HP \fB\-help\-debug\fR .IP Show all debugging options (usage: \fB\-\-help\fR \fB\-help\-debug\fR) .HP \fB\-logips\fR .IP Include IP addresses in debug output (default: 0) .HP \fB\-logtimestamps\fR .IP Prepend debug output with timestamp (default: 1) .HP \fB\-maxtxfee=\fR .IP Maximum total fees (in BCH) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: 0.10) .HP \fB\-printtoconsole\fR .IP Send trace/debug info to console instead of debug.log file .HP \fB\-shrinkdebugfile\fR .IP Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR) .HP \fB\-uacomment=\fR .IP Append comment to the user agent string .PP Chain selection options: .HP \fB\-testnet\fR .IP Use the test chain .PP Node relay options: .HP \fB\-bytespersigop\fR .IP Equivalent bytes per sigop in transactions for relay and mining (default: 20) .HP \fB\-datacarrier\fR .IP Relay and mine data carrier transactions (default: 1) .HP \fB\-datacarriersize\fR .IP Maximum size of data in data carrier transactions we relay and mine (default: 223) .HP \fB\-minrelaytxfee=\fR .IP Fees (in BCH/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: 0.00001) .HP \fB\-whitelistforcerelay\fR .IP Force relay of transactions from whitelisted peers even if they violate local relay policy (default: 1) .HP \fB\-whitelistrelay\fR .IP Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: 1) .PP Block creation options: .HP \fB\-blockmaxsize=\fR .IP Set maximum block size in bytes (default: 2000000) .HP \fB\-blockmintxfee=\fR .IP Set lowest fee rate (in BCH/kB) for transactions to be included in block creation. (default: 0.00001) .HP \fB\-blockprioritypercentage=\fR .IP Set maximum percentage of a block reserved to high\-priority/low\-fee transactions (default: 5) .PP RPC server options: .HP \fB\-rest\fR .IP Accept public REST requests (default: 0) .HP \fB\-rpcallowip=\fR .IP Allow JSON\-RPC connections from specified source. Valid for are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times .HP \fB\-rpcauth=\fR .IP Username and hashed password for JSON\-RPC connections. The field comes in the format: :$. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=/rpcpassword= pair of arguments. This option can be specified multiple times .HP \fB\-rpcbind=\fR .IP Bind to given address to listen for JSON\-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces) .HP \fB\-rpccookiefile=\fR .IP Location of the auth cookie (default: data dir) .HP \fB\-rpccorsdomain\fR=\fI\,value\/\fR .IP Domain from which to accept cross origin requests (browser enforced) .HP \fB\-rpcpassword=\fR .IP Password for JSON\-RPC connections .HP \fB\-rpcport=\fR .IP Listen for JSON\-RPC connections on (default: 8332 or testnet: 18332) .HP \fB\-rpcthreads=\fR .IP Set the number of threads to service RPC calls (default: 4) .HP \fB\-rpcuser=\fR .IP Username for JSON\-RPC connections .HP \fB\-server\fR .IP Accept command line and JSON\-RPC commands .SH COPYRIGHT Copyright (C) 2009-2019 The Bitcoin developers Please contribute if you find Bitcoin ABC useful. Visit for further information about the software. The source code is available from . This is experimental software. Distributed under the MIT software license, see the accompanying file COPYING or This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.