diff --git a/doc/release-notes.md b/doc/release-notes.md
index 127277b3a..e58a747db 100644
--- a/doc/release-notes.md
+++ b/doc/release-notes.md
@@ -1,11 +1,12 @@
Bitcoin ABC version 0.19.4 is now available from:
This release includes the following features and fixes:
- Added to `getblockchaininfo` `size_on_disk` and, when the prune option is
enabled, `prune_height`, `automatic_pruning`, and `prune_target_size`.
- The help message also reflects this.
- Code standard updated to c++14.
- Remove `depends` from transaction objects provided by `getblocktemplate`.
- The option to reuse exisiting receiving addresses has been removed from the wallet.
+ - Remove safe mode.
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index d6c6af6b0..f2e84daac 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -1,360 +1,359 @@
# Copyright (c) 2017 The Bitcoin developers
cmake_minimum_required(VERSION 3.5)
project(BitcoinABC)
set(CMAKE_CXX_STANDARD 14)
# Default visibility is hidden on all targets.
set(CMAKE_C_VISIBILITY_PRESET hidden)
set(CMAKE_CXX_VISIBILITY_PRESET hidden)
option(BUILD_BITCOIN_WALLET "Activate the wallet functionality" ON)
option(BUILD_BITCOIN_ZMQ "Activate the ZeroMQ functionalities" ON)
option(BUILD_BITCOIN_SEEDER "Build bitcoin-seeder" ON)
option(BUILD_BITCOIN_CLI "Build bitcoin-cli" ON)
option(BUILD_BITCOIN_TX "Build bitcoin-tx" ON)
option(BUILD_BITCOIN_QT "Build bitcoin-qt" ON)
option(ENABLE_HARDENING "Harden the executables" ON)
# Cmake uses the CMAKE_BUILD_TYPE variable to select the build configuration.
# By default it supports more configurations that needed for Bitcoin ABC, and
# all the releases types set NDEBUG which is unwanted as it disables the assert
# completely.
# Remove the -DNDEBUG flag from the CFLAGS/CXXFLAGS in all the configurations
include(AddCompilerFlags)
remove_compiler_flags(-DNDEBUG)
# Overrides the flags for the Debug build type
# This mimics the autotools behavior by setting the CFLAGS to '-g -O2`, which
# are not well suited for debugging.
# FIXME: update CFLAGS with better debug oriented optimization flags
set(CMAKE_C_FLAGS_DEBUG "-g -O2")
# Prefer -g3, defaults to -g if unavailable
add_cxx_compiler_flag_with_fallback(CMAKE_CXX_FLAGS_DEBUG -g3 -g)
# Prefer -Og, defaults to -O0 if unavailable
add_cxx_compiler_flag_with_fallback(CMAKE_CXX_FLAGS_DEBUG -Og -O0)
# Define the debugging symbols DEBUG and DEBUG_LOCKORDER when the Debug build
# type is selected.
string(APPEND CMAKE_CXX_FLAGS_DEBUG " -DDEBUG -DDEBUG_LOCKORDER")
# Ensure that WINDRES_PREPROC is enabled when using windres.
if(${CMAKE_SYSTEM_NAME} MATCHES "Windows")
# Ensure that WINDRES_PREPROC is enabled when using windres.
list(APPEND CMAKE_RC_FLAGS "-DWINDRES_PREPROC")
# Build all static so there is no dll file to distribute.
add_compiler_flag(-static)
endif()
# All windows code is PIC, forcing it on just adds useless compile warnings
if(NOT ${CMAKE_SYSTEM_NAME} MATCHES "Windows")
add_compiler_flag(-fPIC)
endif()
if(ENABLE_HARDENING)
# Enable stack protection
add_cxx_compiler_flag(-fstack-protector-all -Wstack-protector)
# Enable some buffer overflow checking
add_compiler_flag(-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2)
# Enable ASLR (these flags are primarily targeting MinGw)
add_linker_flag(-Wl,--dynamicbase -Wl,--nxcompat -Wl,--high-entropy-va)
# Make the relocated sections read-only
add_linker_flag(-Wl,-z,relro -Wl,-z,now)
# CMake provides the POSITION_INDEPENDENT_CODE property to set PIC/PIE.
# Unfortunately setting the -pie linker flag this way require CMake >= 3.14,
# which is not widely distributed at the time of writing.
# FIXME: use the POSITION_INDEPENDENT_CODE property instead
if(NOT ${CMAKE_SYSTEM_NAME} MATCHES "Windows")
add_compiler_flag(-fPIE)
add_linker_flag(-pie)
else()
# MinGw provides its own libssp for stack smashing protection
link_libraries(ssp)
endif()
endif()
# Enable warning
add_c_compiler_flag(-Wnested-externs -Wstrict-prototypes)
add_compiler_flag(
-Wall
-Wextra
-Wformat
-Wvla
-Wformat-security
-Wcast-align
-Wunused-parameter
-Wmissing-braces
# FIXME: Activating this flag cause cmake to fail on leveldb.
# -Wthread-safety-analysis
-Wshadow
)
option(EXTRA_WARNINGS "Enable extra warnings" OFF)
if(EXTRA_WARNINGS)
add_cxx_compiler_flag(-Wsuggest-override)
else()
add_compiler_flag(-Wno-unused-parameter)
endif()
# Create a target for OpenSSL
include(BrewHelper)
find_brew_prefix(OPENSSL_ROOT_DIR openssl)
find_package(OpenSSL REQUIRED)
# libtool style configure
add_subdirectory(config)
# libraries
add_subdirectory(crypto)
add_subdirectory(leveldb)
add_subdirectory(secp256k1)
add_subdirectory(univalue)
# Because the Bitcoin ABc source code is disorganised, we
# end up with a bunch of libraries without any aparent
# cohesive structure. This is inherited from Bitcoin Core
# and reflecting this.
# TODO: Improve the structure once cmake is rocking.
# Various completely unrelated features shared by all executables.
add_library(util
chainparamsbase.cpp
clientversion.cpp
compat/glibc_sanity.cpp
compat/glibcxx_sanity.cpp
compat/strnlen.cpp
fs.cpp
interface/handler.cpp
interface/node.cpp
logging.cpp
random.cpp
rcu.cpp
rpc/protocol.cpp
support/cleanse.cpp
support/lockedpool.cpp
sync.cpp
threadinterrupt.cpp
uint256.cpp
util.cpp
utilmoneystr.cpp
utilstrencodings.cpp
utiltime.cpp
)
target_compile_definitions(util PUBLIC HAVE_CONFIG_H)
target_include_directories(util
PUBLIC
.
# To access the config.
${CMAKE_CURRENT_BINARY_DIR}
)
# Target specific configs
if(${CMAKE_SYSTEM_NAME} MATCHES "Windows")
set(Boost_USE_STATIC_LIBS ON)
set(Boost_THREADAPI win32)
find_package(SHLWAPI REQUIRED)
target_link_libraries(util ${SHLWAPI_LIBRARY})
target_include_directories(util PUBLIC ${SHLWAPI_INCLUDE_DIR})
find_library(WS2_32_LIBRARY NAMES ws2_32)
target_link_libraries(util ${WS2_32_LIBRARY})
target_compile_definitions(util PUBLIC BOOST_THREAD_USE_LIB)
endif()
# Boost packages
set(BOOST_PACKAGES_REQUIRED chrono filesystem program_options thread)
function(prepend var prefix)
set(listVar "")
foreach(f ${ARGN})
list(APPEND listVar "${prefix}${f}")
endforeach(f)
set(${var} "${listVar}" PARENT_SCOPE)
endfunction(prepend)
prepend(BOOST_LIBRARIES "Boost::" ${BOOST_PACKAGES_REQUIRED})
find_package(Boost 1.58 REQUIRED ${BOOST_PACKAGES_REQUIRED})
target_link_libraries(util univalue crypto ${BOOST_LIBRARIES})
# Make sure boost uses std::atomic (it doesn't before 1.63)
target_compile_definitions(util PUBLIC BOOST_SP_USE_STD_ATOMIC BOOST_AC_USE_STD_ATOMIC)
# More completely unrelated features shared by all executables.
# Because nothing says this is different from util than "common"
add_library(common
amount.cpp
base58.cpp
cashaddr.cpp
cashaddrenc.cpp
chainparams.cpp
config.cpp
consensus/merkle.cpp
coins.cpp
compressor.cpp
dstencode.cpp
feerate.cpp
globals.cpp
core_read.cpp
core_write.cpp
key.cpp
keystore.cpp
netaddress.cpp
netbase.cpp
primitives/block.cpp
protocol.cpp
scheduler.cpp
script/sign.cpp
script/standard.cpp
warnings.cpp
)
target_link_libraries(common util secp256k1)
# libbitcoinconsensus
add_library(bitcoinconsensus
arith_uint256.cpp
hash.cpp
primitives/transaction.cpp
pubkey.cpp
script/bitcoinconsensus.cpp
script/interpreter.cpp
script/script.cpp
script/script_error.cpp
script/sigencoding.cpp
uint256.cpp
utilstrencodings.cpp
)
target_link_libraries(bitcoinconsensus common)
# Bitcoin server facilities
add_library(server
addrman.cpp
addrdb.cpp
avalanche.cpp
bloom.cpp
blockencodings.cpp
blockfilter.cpp
chain.cpp
checkpoints.cpp
config.cpp
consensus/activation.cpp
consensus/tx_verify.cpp
globals.cpp
httprpc.cpp
httpserver.cpp
init.cpp
dbwrapper.cpp
merkleblock.cpp
miner.cpp
net.cpp
net_processing.cpp
noui.cpp
policy/fees.cpp
policy/policy.cpp
pow.cpp
rest.cpp
rpc/abc.cpp
rpc/blockchain.cpp
rpc/command.cpp
rpc/jsonrpcrequest.cpp
rpc/mining.cpp
rpc/misc.cpp
rpc/net.cpp
rpc/rawtransaction.cpp
- rpc/safemode.cpp
rpc/server.cpp
script/scriptcache.cpp
script/sigcache.cpp
script/ismine.cpp
timedata.cpp
torcontrol.cpp
txdb.cpp
txmempool.cpp
ui_interface.cpp
validation.cpp
validationinterface.cpp
)
# This require libevent
find_package(Event REQUIRED)
target_include_directories(server PRIVATE leveldb/helpers/memenv)
target_link_libraries(server
Event
bitcoinconsensus
leveldb
memenv
)
# Test suite.
add_subdirectory(test)
# Benchmark suite.
add_subdirectory(bench)
# Wallet
if(BUILD_BITCOIN_WALLET)
add_subdirectory(wallet)
target_link_libraries(server wallet)
endif()
# ZeroMQ
if(BUILD_BITCOIN_ZMQ)
add_subdirectory(zmq)
target_link_libraries(server zmq)
endif()
# RPC client support
add_library(rpcclient rpc/client.cpp)
target_link_libraries(rpcclient univalue util)
# bitcoin-seeder
if(BUILD_BITCOIN_SEEDER)
add_subdirectory(seeder)
endif()
# bitcoin-cli
if(BUILD_BITCOIN_CLI)
add_executable(bitcoin-cli bitcoin-cli.cpp)
if(${CMAKE_SYSTEM_NAME} MATCHES "Windows")
target_sources(bitcoin-cli PRIVATE bitcoin-cli-res.rc)
endif()
target_link_libraries(bitcoin-cli common rpcclient Event)
endif()
# bitcoin-tx
if(BUILD_BITCOIN_TX)
add_executable(bitcoin-tx bitcoin-tx.cpp)
if(${CMAKE_SYSTEM_NAME} MATCHES "Windows")
target_sources(bitcoin-tx PRIVATE bitcoin-tx-res.rc)
endif()
target_link_libraries(bitcoin-tx bitcoinconsensus)
endif()
# bitcoind
add_executable(bitcoind bitcoind.cpp)
target_link_libraries(bitcoind server)
if(${CMAKE_SYSTEM_NAME} MATCHES "Windows")
target_sources(bitcoind PRIVATE bitcoind-res.rc)
endif()
# Bitcoin-qt
if(BUILD_BITCOIN_QT)
add_subdirectory(qt)
endif()
diff --git a/src/Makefile.am b/src/Makefile.am
index 5f86c8479..10657630d 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1,654 +1,652 @@
# Copyright (c) 2013-2016 The Bitcoin Core developers
# Distributed under the MIT software license, see the accompanying
# file COPYING or http://www.opensource.org/licenses/mit-license.php.
DIST_SUBDIRS = secp256k1 univalue
AM_LDFLAGS = $(PTHREAD_CFLAGS) $(LIBTOOL_LDFLAGS) $(HARDENED_LDFLAGS) $(SANITIZER_LDFLAGS)
AM_CXXFLAGS = $(DEBUG_CXXFLAGS) $(HARDENED_CXXFLAGS) $(ERROR_CXXFLAGS) $(SANITIZER_CXXFLAGS)
AM_CPPFLAGS = $(DEBUG_CPPFLAGS) $(HARDENED_CPPFLAGS)
EXTRA_LIBRARIES =
if EMBEDDED_UNIVALUE
LIBUNIVALUE = univalue/libunivalue.la
$(LIBUNIVALUE): $(wildcard univalue/lib/*) $(wildcard univalue/include/*)
$(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -C $(@D) $(@F)
else
LIBUNIVALUE = $(UNIVALUE_LIBS)
endif
BITCOIN_INCLUDES=-I$(builddir) -I$(builddir)/obj $(BDB_CPPFLAGS) $(BOOST_CPPFLAGS) $(LEVELDB_CPPFLAGS) $(CRYPTO_CFLAGS) $(SSL_CFLAGS)
BITCOIN_INCLUDES += -I$(srcdir)/secp256k1/include
BITCOIN_INCLUDES += $(UNIVALUE_CFLAGS)
BITCOIN_SEEDER_INCLUDES = -I$(srcdir)/seeder
BITCOIN_SEEDER_INCLUDES += $(BITCOIN_INCLUDES)
LIBBITCOIN_SERVER=libbitcoin_server.a
LIBBITCOIN_COMMON=libbitcoin_common.a
LIBBITCOIN_CONSENSUS=libbitcoin_consensus.a
LIBBITCOIN_CLI=libbitcoin_cli.a
LIBBITCOIN_UTIL=libbitcoin_util.a
LIBBITCOIN_CRYPTO_BASE=crypto/libbitcoin_crypto_base.a
LIBBITCOINQT=qt/libbitcoinqt.a
LIBSECP256K1=secp256k1/libsecp256k1.la
if ENABLE_ZMQ
LIBBITCOIN_ZMQ=libbitcoin_zmq.a
endif
if BUILD_BITCOIN_LIBS
LIBBITCOINCONSENSUS=libbitcoinconsensus.la
endif
if BUILD_BITCOIN_SEEDER
LIBBITCOIN_SEEDER=libbitcoin_seeder.a
endif
if ENABLE_WALLET
LIBBITCOIN_WALLET=libbitcoin_wallet.a
endif
LIBBITCOIN_CRYPTO= $(LIBBITCOIN_CRYPTO_BASE)
if ENABLE_SSE41
LIBBITCOIN_CRYPTO_SSE41 = crypto/libbitcoin_crypto_sse41.a
LIBBITCOIN_CRYPTO += $(LIBBITCOIN_CRYPTO_SSE41)
endif
if ENABLE_AVX2
LIBBITCOIN_CRYPTO_AVX2 = crypto/libbitcoin_crypto_avx2.a
LIBBITCOIN_CRYPTO += $(LIBBITCOIN_CRYPTO_AVX2)
endif
if ENABLE_SHANI
LIBBITCOIN_CRYPTO_SHANI = crypto/libbitcoin_crypto_shani.a
LIBBITCOIN_CRYPTO += $(LIBBITCOIN_CRYPTO_SHANI)
endif
$(LIBSECP256K1): $(wildcard secp256k1/src/*) $(wildcard secp256k1/include/*)
$(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -C $(@D) $(@F)
# Make is not made aware of per-object dependencies to avoid limiting building parallelization
# But to build the less dependent modules first, we manually select their order here:
EXTRA_LIBRARIES += \
$(LIBBITCOIN_CRYPTO) \
$(LIBBITCOIN_UTIL) \
$(LIBBITCOIN_COMMON) \
$(LIBBITCOIN_CONSENSUS) \
$(LIBBITCOIN_SERVER) \
$(LIBBITCOIN_CLI) \
$(LIBBITCOIN_SEEDER) \
$(LIBBITCOIN_WALLET) \
$(LIBBITCOIN_ZMQ)
lib_LTLIBRARIES = $(LIBBITCOINCONSENSUS)
bin_PROGRAMS =
noinst_PROGRAMS =
TESTS =
BENCHMARKS =
if BUILD_BITCOIND
bin_PROGRAMS += bitcoind
endif
if BUILD_BITCOIN_SEEDER
bin_PROGRAMS += bitcoin-seeder
endif
if BUILD_BITCOIN_UTILS
bin_PROGRAMS += bitcoin-cli bitcoin-tx
endif
.PHONY: FORCE check-symbols check-security
# bitcoin core #
BITCOIN_CORE_H = \
addrdb.h \
addrman.h \
avalanche.h \
base58.h \
bloom.h \
blockencodings.h \
blockfileinfo.h \
blockfilter.h \
blockindexworkcomparator.h \
blockstatus.h \
blockvalidity.h \
cashaddr.h \
cashaddrenc.h \
chain.h \
chainparams.h \
chainparamsbase.h \
chainparamsseeds.h \
checkpoints.h \
checkqueue.h \
clientversion.h \
coins.h \
compat.h \
compat/byteswap.h \
compat/endian.h \
compat/sanity.h \
compressor.h \
config.h \
consensus/activation.h \
consensus/consensus.h \
consensus/tx_verify.h \
core_io.h \
core_memusage.h \
cuckoocache.h \
diskblockpos.h \
dstencode.h \
fs.h \
globals.h \
httprpc.h \
httpserver.h \
indirectmap.h \
init.h \
interface/handler.h \
interface/node.h \
key.h \
keystore.h \
dbwrapper.h \
limitedmap.h \
logging.h \
memusage.h \
merkleblock.h \
miner.h \
net.h \
net_processing.h \
netaddress.h \
netbase.h \
netmessagemaker.h \
noui.h \
policy/fees.h \
policy/policy.h \
pow.h \
protocol.h \
radix.h \
random.h \
rcu.h \
reverse_iterator.h \
reverselock.h \
rpc/blockchain.h \
rpc/client.h \
rpc/command.h \
rpc/jsonrpcrequest.h \
rpc/mining.h \
rpc/misc.h \
rpc/protocol.h \
rpc/rawtransaction.h \
- rpc/safemode.h \
rpc/server.h \
rpc/tojson.h \
rpc/register.h \
rwcollection.h \
scheduler.h \
script/scriptcache.h \
script/sigcache.h \
script/sign.h \
script/standard.h \
script/ismine.h \
streams.h \
support/allocators/secure.h \
support/allocators/zeroafterfree.h \
support/cleanse.h \
support/events.h \
support/lockedpool.h \
sync.h \
threadsafety.h \
threadinterrupt.h \
timedata.h \
torcontrol.h \
txdb.h \
txmempool.h \
ui_interface.h \
undo.h \
util.h \
utilmoneystr.h \
utiltime.h \
validation.h \
validationinterface.h \
versionbits.h \
walletinitinterface.h \
wallet/coincontrol.h \
wallet/crypter.h \
wallet/db.h \
wallet/finaltx.h \
wallet/rpcdump.h \
wallet/fees.h \
wallet/rpcwallet.h \
wallet/wallet.h \
wallet/walletdb.h \
wallet/walletutil.h \
warnings.h \
zmq/zmqabstractnotifier.h \
zmq/zmqconfig.h\
zmq/zmqnotificationinterface.h \
zmq/zmqpublishnotifier.h
obj/build.h: FORCE
@$(MKDIR_P) "$(builddir)/obj"
@$(top_srcdir)/share/genbuild.sh "$(abs_top_builddir)/src/obj/build.h" \
"$(abs_top_srcdir)"
libbitcoin_util_a-clientversion.$(OBJEXT): obj/build.h
# server: shared between bitcoind and bitcoin-qt
libbitcoin_server_a_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES) $(MINIUPNPC_CPPFLAGS) $(EVENT_CFLAGS) $(EVENT_PTHREADS_CFLAGS)
libbitcoin_server_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_server_a_SOURCES = \
addrman.cpp \
addrdb.cpp \
avalanche.cpp \
bloom.cpp \
blockencodings.cpp \
blockfilter.cpp \
chain.cpp \
checkpoints.cpp \
config.cpp \
consensus/activation.cpp \
consensus/tx_verify.cpp \
globals.cpp \
httprpc.cpp \
httpserver.cpp \
init.cpp \
dbwrapper.cpp \
merkleblock.cpp \
miner.cpp \
net.cpp \
net_processing.cpp \
noui.cpp \
policy/fees.cpp \
policy/policy.cpp \
pow.cpp \
rest.cpp \
rpc/abc.cpp \
rpc/blockchain.cpp \
rpc/command.cpp \
rpc/jsonrpcrequest.cpp \
rpc/mining.cpp \
rpc/misc.cpp \
rpc/net.cpp \
rpc/rawtransaction.cpp \
- rpc/safemode.cpp \
rpc/server.cpp \
script/scriptcache.cpp \
script/sigcache.cpp \
script/ismine.cpp \
timedata.cpp \
torcontrol.cpp \
txdb.cpp \
txmempool.cpp \
ui_interface.cpp \
validation.cpp \
validationinterface.cpp \
$(BITCOIN_CORE_H)
if ENABLE_ZMQ
libbitcoin_zmq_a_CPPFLAGS = $(BITCOIN_INCLUDES) $(ZMQ_CFLAGS)
libbitcoin_zmq_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_zmq_a_SOURCES = \
zmq/zmqabstractnotifier.cpp \
zmq/zmqnotificationinterface.cpp \
zmq/zmqpublishnotifier.cpp
endif
# wallet: shared between bitcoind and bitcoin-qt, but only linked
# when wallet enabled
libbitcoin_wallet_a_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
libbitcoin_wallet_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_wallet_a_SOURCES = \
wallet/crypter.cpp \
wallet/db.cpp \
wallet/finaltx.cpp \
wallet/fees.cpp \
wallet/init.cpp \
wallet/rpcdump.cpp \
wallet/rpcwallet.cpp \
wallet/wallet.cpp \
wallet/walletdb.cpp \
wallet/walletutil.cpp \
$(BITCOIN_CORE_H)
# crypto primitives library
crypto_libbitcoin_crypto_base_a_CPPFLAGS = $(AM_CPPFLAGS)
crypto_libbitcoin_crypto_base_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
crypto_libbitcoin_crypto_base_a_SOURCES = \
crypto/aes.cpp \
crypto/aes.h \
crypto/chacha20.h \
crypto/chacha20.cpp \
crypto/common.h \
crypto/hmac_sha256.cpp \
crypto/hmac_sha256.h \
crypto/hmac_sha512.cpp \
crypto/hmac_sha512.h \
crypto/ripemd160.cpp \
crypto/ripemd160.h \
crypto/sha1.cpp \
crypto/sha1.h \
crypto/sha256.cpp \
crypto/sha256.h \
crypto/sha512.cpp \
crypto/sha512.h
if USE_ASM
crypto_libbitcoin_crypto_base_a_SOURCES += crypto/sha256_sse4.cpp
endif
crypto_libbitcoin_crypto_sse41_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
crypto_libbitcoin_crypto_sse41_a_CPPFLAGS = $(AM_CPPFLAGS)
crypto_libbitcoin_crypto_sse41_a_CXXFLAGS += $(SSE41_CXXFLAGS)
crypto_libbitcoin_crypto_sse41_a_CPPFLAGS += -DENABLE_SSE41
crypto_libbitcoin_crypto_sse41_a_SOURCES = crypto/sha256_sse41.cpp
crypto_libbitcoin_crypto_avx2_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
crypto_libbitcoin_crypto_avx2_a_CPPFLAGS = $(AM_CPPFLAGS)
crypto_libbitcoin_crypto_avx2_a_CXXFLAGS += $(AVX2_CXXFLAGS)
crypto_libbitcoin_crypto_avx2_a_CPPFLAGS += -DENABLE_AVX2
crypto_libbitcoin_crypto_avx2_a_SOURCES = crypto/sha256_avx2.cpp
crypto_libbitcoin_crypto_shani_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
crypto_libbitcoin_crypto_shani_a_CPPFLAGS = $(AM_CPPFLAGS)
crypto_libbitcoin_crypto_shani_a_CXXFLAGS += $(SHANI_CXXFLAGS)
crypto_libbitcoin_crypto_shani_a_CPPFLAGS += -DENABLE_SHANI
crypto_libbitcoin_crypto_shani_a_SOURCES = crypto/sha256_shani.cpp
# consensus: shared between all executables that validate any consensus rules.
libbitcoin_consensus_a_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
libbitcoin_consensus_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_consensus_a_SOURCES = \
amount.h \
arith_uint256.cpp \
arith_uint256.h \
consensus/merkle.cpp \
consensus/merkle.h \
consensus/params.h \
consensus/validation.h \
feerate.h \
hash.cpp \
hash.h \
prevector.h \
primitives/block.cpp \
primitives/block.h \
primitives/transaction.cpp \
primitives/transaction.h \
primitives/txid.h \
pubkey.cpp \
pubkey.h \
script/bitcoinconsensus.cpp \
script/sighashtype.h \
script/interpreter.cpp \
script/interpreter.h \
script/script.cpp \
script/script.h \
script/script_error.cpp \
script/script_error.h \
script/script_flags.h \
script/sigencoding.cpp \
script/sigencoding.h \
serialize.h \
tinyformat.h \
uint256.cpp \
uint256.h \
utilstrencodings.cpp \
utilstrencodings.h \
version.h
# common: shared between bitcoind, and bitcoin-qt and non-server tools
libbitcoin_common_a_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
libbitcoin_common_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_common_a_SOURCES = \
amount.cpp \
base58.cpp \
cashaddr.cpp \
cashaddrenc.cpp \
chainparams.cpp \
config.cpp \
coins.cpp \
compressor.cpp \
dstencode.cpp \
feerate.cpp \
globals.cpp \
core_read.cpp \
core_write.cpp \
key.cpp \
keystore.cpp \
netaddress.cpp \
netbase.cpp \
protocol.cpp \
scheduler.cpp \
script/sign.cpp \
script/standard.cpp \
warnings.cpp \
$(BITCOIN_CORE_H)
# util: shared between all executables.
# This library *must* be included to make sure that the glibc
# backward-compatibility objects and their sanity checks are linked.
libbitcoin_util_a_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
libbitcoin_util_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_util_a_SOURCES = \
support/lockedpool.cpp \
chainparamsbase.cpp \
clientversion.cpp \
compat/glibc_sanity.cpp \
compat/glibcxx_sanity.cpp \
compat/strnlen.cpp \
fs.cpp \
interface/handler.cpp \
interface/node.cpp \
logging.cpp \
random.cpp \
rcu.cpp \
rpc/protocol.cpp \
support/cleanse.cpp \
sync.cpp \
threadinterrupt.cpp \
uint256.cpp \
uint256.h \
util.cpp \
utilmoneystr.cpp \
utilstrencodings.cpp \
utiltime.cpp \
$(BITCOIN_CORE_H)
if GLIBC_BACK_COMPAT
libbitcoin_util_a_SOURCES += compat/glibc_compat.cpp
AM_LDFLAGS += $(COMPAT_LDFLAGS)
endif
# cli: shared between bitcoin-cli and bitcoin-qt
libbitcoin_cli_a_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
libbitcoin_cli_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_cli_a_SOURCES = \
rpc/client.cpp \
$(BITCOIN_CORE_H)
# seeder library
libbitcoin_seeder_a_CPPFLAGS = $(AM_CPPFLAGS) $(PIE_FLAGS) $(BITCOIN_SEEDER_INCLUDES)
libbitcoin_seeder_a_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
libbitcoin_seeder_a_SOURCES = \
seeder/bitcoin.cpp \
seeder/bitcoin.h \
seeder/db.cpp \
seeder/db.h \
seeder/dns.cpp \
seeder/dns.h \
seeder/strlcpy.h \
seeder/util.h
nodist_libbitcoin_util_a_SOURCES = $(srcdir)/obj/build.h
#
# bitcoind binary #
bitcoind_SOURCES = bitcoind.cpp
bitcoind_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
bitcoind_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
bitcoind_LDFLAGS = $(RELDFLAGS) $(AM_LDFLAGS) $(LIBTOOL_APP_LDFLAGS)
if TARGET_WINDOWS
bitcoind_SOURCES += bitcoind-res.rc
endif
bitcoind_LDADD = \
$(LIBBITCOIN_SERVER) \
$(LIBBITCOIN_COMMON) \
$(LIBUNIVALUE) \
$(LIBBITCOIN_UTIL) \
$(LIBBITCOIN_WALLET) \
$(LIBBITCOIN_ZMQ) \
$(LIBBITCOIN_CONSENSUS) \
$(LIBBITCOIN_CRYPTO) \
$(LIBLEVELDB) \
$(LIBLEVELDB_SSE42) \
$(LIBMEMENV) \
$(LIBSECP256K1)
bitcoind_LDADD += $(BOOST_LIBS) $(BDB_LIBS) $(SSL_LIBS) $(CRYPTO_LIBS) $(MINIUPNPC_LIBS) $(EVENT_PTHREADS_LIBS) $(EVENT_LIBS) $(ZMQ_LIBS)
# bitcoin-cli binary #
bitcoin_cli_SOURCES = bitcoin-cli.cpp
bitcoin_cli_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES) $(EVENT_CFLAGS)
bitcoin_cli_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
bitcoin_cli_LDFLAGS = $(RELDFLAGS) $(AM_LDFLAGS) $(LIBTOOL_APP_LDFLAGS)
if TARGET_WINDOWS
bitcoin_cli_SOURCES += bitcoin-cli-res.rc
endif
bitcoin_cli_LDADD = \
$(LIBBITCOIN_CLI) \
$(LIBUNIVALUE) \
$(LIBBITCOIN_UTIL) \
$(LIBBITCOIN_CRYPTO)
bitcoin_cli_LDADD += $(BOOST_LIBS) $(SSL_LIBS) $(CRYPTO_LIBS) $(EVENT_LIBS)
#
# bitcoin-seeder binary #
bitcoin_seeder_SOURCES = seeder/main.cpp
bitcoin_seeder_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_SEEDER_INCLUDES)
bitcoin_seeder_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
bitcoin_seeder_LDFLAGS = $(RELDFLAGS) $(AM_LDFLAGS) $(LIBTOOL_APP_LDFLAGS)
bitcoin_seeder_LDADD = \
$(LIBBITCOIN_SEEDER) \
$(LIBBITCOIN_COMMON) \
$(LIBBITCOIN_UTIL) \
$(LIBBITCOIN_CRYPTO)
bitcoin_seeder_LDADD += $(BOOST_LIBS) $(CRYPTO_LIBS)
#
# bitcoin-tx binary #
bitcoin_tx_SOURCES = bitcoin-tx.cpp
bitcoin_tx_CPPFLAGS = $(AM_CPPFLAGS) $(BITCOIN_INCLUDES)
bitcoin_tx_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
bitcoin_tx_LDFLAGS = $(RELDFLAGS) $(AM_LDFLAGS) $(LIBTOOL_APP_LDFLAGS)
if TARGET_WINDOWS
bitcoin_tx_SOURCES += bitcoin-tx-res.rc
endif
bitcoin_tx_LDADD = \
$(LIBUNIVALUE) \
$(LIBBITCOIN_COMMON) \
$(LIBBITCOIN_UTIL) \
$(LIBBITCOIN_CONSENSUS) \
$(LIBBITCOIN_CRYPTO) \
$(LIBSECP256K1)
bitcoin_tx_LDADD += $(BOOST_LIBS) $(CRYPTO_LIBS)
#
# bitcoinconsensus library #
if BUILD_BITCOIN_LIBS
include_HEADERS = script/bitcoinconsensus.h
libbitcoinconsensus_la_SOURCES = $(crypto_libbitcoin_crypto_base_a_SOURCES) $(libbitcoin_consensus_a_SOURCES)
if GLIBC_BACK_COMPAT
libbitcoinconsensus_la_SOURCES += compat/glibc_compat.cpp
endif
libbitcoinconsensus_la_LDFLAGS = $(AM_LDFLAGS) -no-undefined $(RELDFLAGS)
libbitcoinconsensus_la_LIBADD = $(LIBSECP256K1)
libbitcoinconsensus_la_CPPFLAGS = $(AM_CPPFLAGS) -I$(builddir)/obj -I$(srcdir)/secp256k1/include -DBUILD_BITCOIN_INTERNAL
libbitcoinconsensus_la_CXXFLAGS = $(AM_CXXFLAGS) $(PIE_FLAGS)
endif
#
CTAES_DIST = crypto/ctaes/bench.c
CTAES_DIST += crypto/ctaes/ctaes.c
CTAES_DIST += crypto/ctaes/ctaes.h
CTAES_DIST += crypto/ctaes/README.md
CTAES_DIST += crypto/ctaes/test.c
CLEANFILES = $(EXTRA_LIBRARIES)
CLEANFILES += *.gcda *.gcno
CLEANFILES += compat/*.gcda compat/*.gcno
CLEANFILES += consensus/*.gcda consensus/*.gcno
CLEANFILES += crypto/*.gcda crypto/*.gcno
CLEANFILES += policy/*.gcda policy/*.gcno
CLEANFILES += primitives/*.gcda primitives/*.gcno
CLEANFILES += script/*.gcda script/*.gcno
CLEANFILES += support/*.gcda support/*.gcno
CLEANFILES += univalue/*.gcda univalue/*.gcno
CLEANFILES += wallet/*.gcda wallet/*.gcno
CLEANFILES += wallet/test/*.gcda wallet/test/*.gcno
CLEANFILES += zmq/*.gcda zmq/*.gcno
DISTCLEANFILES = obj/build.h
EXTRA_DIST = $(CTAES_DIST)
clean-local:
-$(MAKE) -C secp256k1 clean
-$(MAKE) -C univalue clean
-rm -f leveldb/*/*.gcda leveldb/*/*.gcno leveldb/helpers/memenv/*.gcda leveldb/helpers/memenv/*.gcno
-rm -rf test/__pycache__
.rc.o:
@test -f $(WINDRES)
## FIXME: How to get the appropriate modulename_CPPFLAGS in here?
$(AM_V_GEN) $(WINDRES) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -DWINDRES_PREPROC -i $< -o $@
.mm.o:
$(AM_V_CXX) $(OBJCXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CXXFLAGS) $(QT_INCLUDES) $(AM_CXXFLAGS) $(PIE_FLAGS) $(CXXFLAGS) -c -o $@ $<
check-symbols: $(bin_PROGRAMS)
if GLIBC_BACK_COMPAT
@echo "Checking glibc back compat..."
$(AM_V_at) READELF=$(READELF) CPPFILT=$(CPPFILT) $(top_srcdir)/contrib/devtools/symbol-check.py < $(bin_PROGRAMS)
endif
check-security: $(bin_PROGRAMS)
if HARDEN
@echo "Checking binary security..."
$(AM_V_at) READELF=$(READELF) OBJDUMP=$(OBJDUMP) $(top_srcdir)/contrib/devtools/security-check.py < $(bin_PROGRAMS)
endif
%.pb.cc %.pb.h: %.proto
@test -f $(PROTOC)
$(AM_V_GEN) $(PROTOC) --cpp_out=$(@D) --proto_path=$(
#include
#include
#ifndef WIN32
#include
#endif
#include
#include
#include
#include
#include
#include
#if ENABLE_ZMQ
#include "zmq/zmqnotificationinterface.h"
#endif
static const bool DEFAULT_PROXYRANDOMIZE = true;
static const bool DEFAULT_REST_ENABLE = false;
static const bool DEFAULT_STOPAFTERBLOCKIMPORT = false;
std::unique_ptr g_connman;
std::unique_ptr peerLogic;
#if !(ENABLE_WALLET)
class DummyWalletInit : public WalletInitInterface {
public:
std::string GetHelpString(bool showDebug) override { return std::string{}; }
bool ParameterInteraction() override { return true; }
void RegisterRPC(CRPCTable &) override {}
bool Verify(const CChainParams &chainParams) override { return true; }
bool Open(const CChainParams &chainParams) override { return true; }
void Start(CScheduler &scheduler) override {}
void Flush() override {}
void Stop() override {}
void Close() override {}
};
static DummyWalletInit g_dummy_wallet_init;
WalletInitInterface *const g_wallet_init_interface = &g_dummy_wallet_init;
#endif
#if ENABLE_ZMQ
static CZMQNotificationInterface *pzmqNotificationInterface = nullptr;
#endif
#ifdef WIN32
// Win32 LevelDB doesn't use filedescriptors, and the ones used for accessing
// block files don't count towards the fd_set size limit anyway.
#define MIN_CORE_FILEDESCRIPTORS 0
#else
#define MIN_CORE_FILEDESCRIPTORS 150
#endif
//////////////////////////////////////////////////////////////////////////////
//
// Shutdown
//
//
// Thread management and startup/shutdown:
//
// The network-processing threads are all part of a thread group created by
// AppInit() or the Qt main() function.
//
// A clean exit happens when StartShutdown() or the SIGTERM signal handler sets
// fRequestShutdown, which triggers the DetectShutdownThread(), which interrupts
// the main thread group. DetectShutdownThread() then exits, which causes
// AppInit() to continue (it .joins the shutdown thread). Shutdown() is then
// called to clean up database connections, and stop other threads that should
// only be stopped after the main network-processing threads have exited.
//
// Note that if running -daemon the parent process returns from AppInit2 before
// adding any threads to the threadGroup, so .join_all() returns immediately and
// the parent exits from main().
//
// Shutdown for Qt is very similar, only it uses a QTimer to detect
// fRequestShutdown getting set, and then does the normal Qt shutdown thing.
//
std::atomic fRequestShutdown(false);
std::atomic fDumpMempoolLater(false);
void StartShutdown() {
fRequestShutdown = true;
}
bool ShutdownRequested() {
return fRequestShutdown;
}
/**
* This is a minimally invasive approach to shutdown on LevelDB read errors from
* the chainstate, while keeping user interface out of the common library, which
* is shared between bitcoind, and bitcoin-qt and non-server tools.
*/
class CCoinsViewErrorCatcher final : public CCoinsViewBacked {
public:
explicit CCoinsViewErrorCatcher(CCoinsView *view)
: CCoinsViewBacked(view) {}
bool GetCoin(const COutPoint &outpoint, Coin &coin) const override {
try {
return CCoinsViewBacked::GetCoin(outpoint, coin);
} catch (const std::runtime_error &e) {
uiInterface.ThreadSafeMessageBox(
_("Error reading from database, shutting down."), "",
CClientUIInterface::MSG_ERROR);
LogPrintf("Error reading from database: %s\n", e.what());
// Starting the shutdown sequence and returning false to the caller
// would be interpreted as 'entry not found' (as opposed to unable
// to read data), and could lead to invalid interpretation. Just
// exit immediately, as we can't continue anyway, and all writes
// should be atomic.
abort();
}
}
// Writes do not need similar protection, as failure to write is handled by
// the caller.
};
static std::unique_ptr pcoinscatcher;
static std::unique_ptr globalVerifyHandle;
static boost::thread_group threadGroup;
static CScheduler scheduler;
void Interrupt() {
InterruptHTTPServer();
InterruptHTTPRPC();
InterruptRPC();
InterruptREST();
InterruptTorControl();
InterruptMapPort();
if (g_connman) {
g_connman->Interrupt();
}
}
void Shutdown() {
LogPrintf("%s: In progress...\n", __func__);
static CCriticalSection cs_Shutdown;
TRY_LOCK(cs_Shutdown, lockShutdown);
if (!lockShutdown) {
return;
}
/// Note: Shutdown() must be able to handle cases in which AppInit2() failed
/// part of the way, for example if the data directory was found to be
/// locked. Be sure that anything that writes files or flushes caches only
/// does this if the respective module was initialized.
RenameThread("bitcoin-shutoff");
g_mempool.AddTransactionsUpdated(1);
StopHTTPRPC();
StopREST();
StopRPC();
StopHTTPServer();
g_wallet_init_interface->Flush();
StopMapPort();
// Because these depend on each-other, we make sure that neither can be
// using the other before destroying them.
if (peerLogic) {
UnregisterValidationInterface(peerLogic.get());
}
if (g_connman) {
g_connman->Stop();
}
peerLogic.reset();
g_connman.reset();
StopTorControl();
// After everything has been shut down, but before things get flushed, stop
// the CScheduler/checkqueue threadGroup
threadGroup.interrupt_all();
threadGroup.join_all();
if (fDumpMempoolLater &&
gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) {
DumpMempool();
}
// FlushStateToDisk generates a SetBestChain callback, which we should avoid
// missing
if (pcoinsTip != nullptr) {
FlushStateToDisk();
}
// After there are no more peers/RPC left to give us new data which may
// generate CValidationInterface callbacks, flush them...
GetMainSignals().FlushBackgroundCallbacks();
// Any future callbacks will be dropped. This should absolutely be safe - if
// missing a callback results in an unrecoverable situation, unclean
// shutdown would too. The only reason to do the above flushes is to let the
// wallet catch up with our current chain to avoid any strange pruning edge
// cases and make next startup faster by avoiding rescan.
{
LOCK(cs_main);
if (pcoinsTip != nullptr) {
FlushStateToDisk();
}
pcoinsTip.reset();
pcoinscatcher.reset();
pcoinsdbview.reset();
pblocktree.reset();
}
g_wallet_init_interface->Stop();
#if ENABLE_ZMQ
if (pzmqNotificationInterface) {
UnregisterValidationInterface(pzmqNotificationInterface);
delete pzmqNotificationInterface;
pzmqNotificationInterface = nullptr;
}
#endif
#ifndef WIN32
try {
fs::remove(GetPidFile());
} catch (const fs::filesystem_error &e) {
LogPrintf("%s: Unable to remove pidfile: %s\n", __func__, e.what());
}
#endif
UnregisterAllValidationInterfaces();
GetMainSignals().UnregisterBackgroundSignalScheduler();
GetMainSignals().UnregisterWithMempoolSignals(g_mempool);
g_wallet_init_interface->Close();
globalVerifyHandle.reset();
ECC_Stop();
LogPrintf("%s: done\n", __func__);
}
/**
* Signal handlers are very limited in what they are allowed to do, so:
*/
void HandleSIGTERM(int) {
fRequestShutdown = true;
}
void HandleSIGHUP(int) {
GetLogger().m_reopen_file = true;
}
void OnRPCStarted() {
uiInterface.NotifyBlockTip.connect(&RPCNotifyBlockChange);
}
void OnRPCStopped() {
uiInterface.NotifyBlockTip.disconnect(&RPCNotifyBlockChange);
RPCNotifyBlockChange(false, nullptr);
g_best_block_cv.notify_all();
LogPrint(BCLog::RPC, "RPC stopped.\n");
}
std::string HelpMessage(HelpMessageMode mode) {
const auto defaultBaseParams =
CreateBaseChainParams(CBaseChainParams::MAIN);
const auto testnetBaseParams =
CreateBaseChainParams(CBaseChainParams::TESTNET);
const auto defaultChainParams = CreateChainParams(CBaseChainParams::MAIN);
const auto testnetChainParams =
CreateChainParams(CBaseChainParams::TESTNET);
const bool showDebug = gArgs.GetBoolArg("-help-debug", false);
// When adding new options to the categories, please keep and ensure
// alphabetical ordering. Do not translate _(...) -help-debug options, Many
// technical terms, and only a very small audience, so is unnecessary stress
// to translators.
std::string strUsage = HelpMessageGroup(_("Options:"));
strUsage += HelpMessageOpt("-?", _("Print this help message and exit"));
strUsage += HelpMessageOpt("-version", _("Print version and exit"));
strUsage += HelpMessageOpt(
"-alertnotify=",
_("Execute command when a relevant alert is received or we see a "
"really long fork (%s in cmd is replaced by message)"));
strUsage += HelpMessageOpt("-blocknotify=",
_("Execute command when the best block changes "
"(%s in cmd is replaced by block hash)"));
if (showDebug) {
strUsage += HelpMessageOpt(
"-blocksonly",
strprintf(
_("Whether to operate in a blocks only mode (default: %d)"),
DEFAULT_BLOCKSONLY));
}
strUsage += HelpMessageOpt(
"-assumevalid=",
strprintf(
_("If this block is in the chain assume that it and its ancestors "
"are valid and potentially skip their script verification (0 to "
"verify all, default: %s, testnet: %s)"),
defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(),
testnetChainParams->GetConsensus().defaultAssumeValid.GetHex()));
strUsage += HelpMessageOpt(
"-conf=", strprintf(_("Specify configuration file (default: %s)"),
BITCOIN_CONF_FILENAME));
if (mode == HelpMessageMode::BITCOIND) {
#if HAVE_DECL_DAEMON
strUsage += HelpMessageOpt(
"-daemon",
_("Run in the background as a daemon and accept commands"));
#endif
}
strUsage += HelpMessageOpt("-datadir=", _("Specify data directory"));
if (showDebug) {
strUsage += HelpMessageOpt(
"-dbbatchsize",
strprintf(
"Maximum database write batch size in bytes (default: %u)",
nDefaultDbBatchSize));
}
strUsage += HelpMessageOpt(
"-dbcache=",
strprintf(
_("Set database cache size in megabytes (%d to %d, default: %d)"),
nMinDbCache, nMaxDbCache, nDefaultDbCache));
if (showDebug) {
strUsage += HelpMessageOpt(
"-feefilter", strprintf("Tell other nodes to filter invs to us by "
"our mempool min fee (default: %d)",
DEFAULT_FEEFILTER));
}
strUsage += HelpMessageOpt(
"-finalizationdelay=",
strprintf("Set the minimum amount of time to wait between a "
"block header reception and the block finalization. "
"Unit is seconds (default: %d)",
DEFAULT_MIN_FINALIZATION_DELAY));
strUsage += HelpMessageOpt(
"-maxreorgdepth=",
strprintf("Configure at what depth blocks are considered final "
"(default: %d). Use -1 to disable.",
DEFAULT_MAX_REORG_DEPTH));
strUsage += HelpMessageOpt(
"-loadblock=",
_("Imports blocks from external blk000??.dat file on startup"));
strUsage += HelpMessageOpt(
"-debuglogfile=",
strprintf(
_("Specify location of debug log file: this can be an absolute "
"path or a path relative to the data directory (default: %s)"),
DEFAULT_DEBUGLOGFILE));
strUsage += HelpMessageOpt(
"-maxorphantx=", strprintf(_("Keep at most unconnectable "
"transactions in memory (default: %u)"),
DEFAULT_MAX_ORPHAN_TRANSACTIONS));
strUsage += HelpMessageOpt("-maxmempool=",
strprintf(_("Keep the transaction memory pool "
"below megabytes (default: %u)"),
DEFAULT_MAX_MEMPOOL_SIZE));
strUsage +=
HelpMessageOpt("-mempoolexpiry=",
strprintf(_("Do not keep transactions in the mempool "
"longer than hours (default: %u)"),
DEFAULT_MEMPOOL_EXPIRY));
if (showDebug) {
strUsage += HelpMessageOpt(
"-minimumchainwork=",
strprintf(
"Minimum work assumed to exist on a valid chain in hex "
"(default: %s, testnet: %s)",
defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(),
testnetChainParams->GetConsensus().nMinimumChainWork.GetHex()));
}
strUsage +=
HelpMessageOpt("-persistmempool",
strprintf(_("Whether to save the mempool on shutdown "
"and load on restart (default: %u)"),
DEFAULT_PERSIST_MEMPOOL));
strUsage += HelpMessageOpt(
"-blockreconstructionextratxn=",
strprintf(_("Extra transactions to keep in memory for compact block "
"reconstructions (default: %u)"),
DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN));
strUsage += HelpMessageOpt(
"-par=",
strprintf(_("Set the number of script verification threads (%u to %d, "
"0 = auto, <0 = leave that many cores free, default: %d)"),
-GetNumCores(), MAX_SCRIPTCHECK_THREADS,
DEFAULT_SCRIPTCHECK_THREADS));
#ifndef WIN32
strUsage += HelpMessageOpt(
"-pid=",
strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME));
#endif
strUsage += HelpMessageOpt(
"-prune=",
strprintf(
_("Reduce storage requirements by enabling pruning (deleting) of "
"old blocks. This allows the pruneblockchain RPC to be called to "
"delete specific blocks, and enables automatic pruning of old "
"blocks if a target size in MiB is provided. This mode is "
"incompatible with -txindex and -rescan. "
"Warning: Reverting this setting requires re-downloading the "
"entire blockchain. "
"(default: 0 = disable pruning blocks, 1 = allow manual pruning "
"via RPC, >%u = automatically prune block files to stay under "
"the specified target size in MiB)"),
MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
strUsage += HelpMessageOpt(
"-reindex-chainstate",
_("Rebuild chain state from the currently indexed blocks"));
strUsage +=
HelpMessageOpt("-reindex", _("Rebuild chain state and block index from "
"the blk*.dat files on disk"));
#ifndef WIN32
strUsage += HelpMessageOpt(
"-sysperms",
_("Create new files with system default permissions, instead of umask "
"077 (only effective with disabled wallet functionality)"));
#endif
strUsage += HelpMessageOpt(
"-txindex", strprintf(_("Maintain a full transaction index, used by "
"the getrawtransaction rpc call (default: %d)"),
DEFAULT_TXINDEX));
strUsage += HelpMessageOpt(
"-usecashaddr", _("Use Cash Address for destination encoding instead "
"of base58 (activate by default on Jan, 14)"));
strUsage += HelpMessageGroup(_("Connection options:"));
strUsage += HelpMessageOpt(
"-addnode=",
_("Add a node to connect to and attempt to keep the connection open "
"(see the `addnode` RPC command help for more info)"));
strUsage += HelpMessageOpt(
"-banscore=",
strprintf(
_("Threshold for disconnecting misbehaving peers (default: %u)"),
DEFAULT_BANSCORE_THRESHOLD));
strUsage += HelpMessageOpt(
"-bantime=", strprintf(_("Number of seconds to keep misbehaving "
"peers from reconnecting (default: %u)"),
DEFAULT_MISBEHAVING_BANTIME));
strUsage += HelpMessageOpt("-bind=",
_("Bind to given address and always listen on "
"it. Use [host]:port notation for IPv6"));
strUsage += HelpMessageOpt(
"-connect=", _("Connect only to the specified node(s); -connect=0 "
"disables automatic connections (the rules for this "
"peer are the same as for -addnode)"));
strUsage += HelpMessageOpt("-discover",
_("Discover own IP addresses (default: 1 when "
"listening and no -externalip or -proxy)"));
strUsage += HelpMessageOpt(
"-dns", _("Allow DNS lookups for -addnode, -seednode and -connect") +
" " + strprintf(_("(default: %d)"), DEFAULT_NAME_LOOKUP));
strUsage += HelpMessageOpt(
"-dnsseed", _("Query for peer addresses via DNS lookup, if low on "
"addresses (default: 1 unless -connect/-noconnect)"));
strUsage += HelpMessageOpt("-externalip=",
_("Specify your own public address"));
strUsage += HelpMessageOpt(
"-forcednsseed",
strprintf(
_("Always query for peer addresses via DNS lookup (default: %d)"),
DEFAULT_FORCEDNSSEED));
strUsage +=
HelpMessageOpt("-listen", _("Accept connections from outside (default: "
"1 if no -proxy or -connect/-noconnect)"));
strUsage += HelpMessageOpt(
"-listenonion",
strprintf(_("Automatically create Tor hidden service (default: %d)"),
DEFAULT_LISTEN_ONION));
strUsage += HelpMessageOpt(
"-maxconnections=",
strprintf(_("Maintain at most connections to peers (default: %u)"),
DEFAULT_MAX_PEER_CONNECTIONS));
strUsage +=
HelpMessageOpt("-maxreceivebuffer=",
strprintf(_("Maximum per-connection receive buffer, "
"*1000 bytes (default: %u)"),
DEFAULT_MAXRECEIVEBUFFER));
strUsage += HelpMessageOpt(
"-maxsendbuffer=", strprintf(_("Maximum per-connection send buffer, "
"*1000 bytes (default: %u)"),
DEFAULT_MAXSENDBUFFER));
strUsage += HelpMessageOpt(
"-maxtimeadjustment",
strprintf(_("Maximum allowed median peer time offset adjustment. Local "
"perspective of time may be influenced by peers forward or "
"backward by this amount. (default: %u seconds)"),
DEFAULT_MAX_TIME_ADJUSTMENT));
strUsage +=
HelpMessageOpt("-onion=",
strprintf(_("Use separate SOCKS5 proxy to reach peers "
"via Tor hidden services (default: %s)"),
"-proxy"));
strUsage += HelpMessageOpt(
"-onlynet=",
_("Only connect to nodes in network (ipv4, ipv6 or onion)"));
strUsage +=
HelpMessageOpt("-permitbaremultisig",
strprintf(_("Relay non-P2SH multisig (default: %d)"),
DEFAULT_PERMIT_BAREMULTISIG));
strUsage += HelpMessageOpt(
"-peerbloomfilters",
strprintf(_("Support filtering of blocks and transaction with bloom "
"filters (default: %d)"),
DEFAULT_PEERBLOOMFILTERS));
strUsage += HelpMessageOpt(
"-port=",
strprintf(
_("Listen for connections on (default: %u or testnet: %u)"),
defaultChainParams->GetDefaultPort(),
testnetChainParams->GetDefaultPort()));
strUsage +=
HelpMessageOpt("-proxy=", _("Connect through SOCKS5 proxy"));
strUsage += HelpMessageOpt(
"-proxyrandomize",
strprintf(_("Randomize credentials for every proxy connection. This "
"enables Tor stream isolation (default: %d)"),
DEFAULT_PROXYRANDOMIZE));
strUsage += HelpMessageOpt(
"-seednode=",
_("Connect to a node to retrieve peer addresses, and disconnect"));
strUsage += HelpMessageOpt(
"-timeout=", strprintf(_("Specify connection timeout in "
"milliseconds (minimum: 1, default: %d)"),
DEFAULT_CONNECT_TIMEOUT));
strUsage += HelpMessageOpt("-torcontrol=:",
strprintf(_("Tor control port to use if onion "
"listening enabled (default: %s)"),
DEFAULT_TOR_CONTROL));
strUsage += HelpMessageOpt("-torpassword=",
_("Tor control port password (default: empty)"));
#ifdef USE_UPNP
#if USE_UPNP
strUsage +=
HelpMessageOpt("-upnp", _("Use UPnP to map the listening port "
"(default: 1 when listening and no -proxy)"));
#else
strUsage += HelpMessageOpt(
"-upnp",
strprintf(_("Use UPnP to map the listening port (default: %u)"), 0));
#endif
#endif
strUsage +=
HelpMessageOpt("-whitebind=",
_("Bind to given address and whitelist peers connecting "
"to it. Use [host]:port notation for IPv6"));
strUsage += HelpMessageOpt(
"-whitelist=",
_("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) "
"or CIDR notated network (e.g. 1.2.3.0/24). Can be specified "
"multiple times.") +
" " +
_("Whitelisted peers cannot be DoS banned and their transactions "
"are always relayed, even if they are already in the mempool, "
"useful e.g. for a gateway"));
strUsage += HelpMessageOpt(
"-whitelistrelay",
strprintf(_("Accept relayed transactions received from whitelisted "
"peers even when not relaying transactions (default: %d)"),
DEFAULT_WHITELISTRELAY));
strUsage += HelpMessageOpt(
"-whitelistforcerelay",
strprintf(_("Force relay of transactions from whitelisted peers even "
"if they violate local relay policy (default: %d)"),
DEFAULT_WHITELISTFORCERELAY));
strUsage += HelpMessageOpt(
"-maxuploadtarget=",
strprintf(_("Tries to keep outbound traffic under the given target (in "
"MiB per 24h), 0 = no limit (default: %d)"),
DEFAULT_MAX_UPLOAD_TARGET));
strUsage += g_wallet_init_interface->GetHelpString(showDebug);
#if ENABLE_ZMQ
strUsage += HelpMessageGroup(_("ZeroMQ notification options:"));
strUsage += HelpMessageOpt("-zmqpubhashblock=",
_("Enable publish hash block in "));
strUsage +=
HelpMessageOpt("-zmqpubhashtx=",
_("Enable publish hash transaction in "));
strUsage += HelpMessageOpt("-zmqpubrawblock=",
_("Enable publish raw block in "));
strUsage +=
HelpMessageOpt("-zmqpubrawtx=",
_("Enable publish raw transaction in "));
#endif
strUsage += HelpMessageGroup(_("Debugging/Testing options:"));
strUsage += HelpMessageOpt("-uacomment=",
_("Append comment to the user agent string"));
if (showDebug) {
strUsage += HelpMessageOpt(
"-checkblocks=",
strprintf(
_("How many blocks to check at startup (default: %u, 0 = all)"),
DEFAULT_CHECKBLOCKS));
strUsage +=
HelpMessageOpt("-checklevel=",
strprintf(_("How thorough the block verification of "
"-checkblocks is (0-4, default: %u)"),
DEFAULT_CHECKLEVEL));
strUsage += HelpMessageOpt(
"-checkblockindex",
strprintf("Do a full consistency check for mapBlockIndex, "
"setBlockIndexCandidates, chainActive and "
"mapBlocksUnlinked occasionally. Also sets -checkmempool "
"(default: %u)",
defaultChainParams->DefaultConsistencyChecks()));
strUsage += HelpMessageOpt(
"-checkmempool=",
strprintf("Run checks every transactions (default: %u)",
defaultChainParams->DefaultConsistencyChecks()));
strUsage += HelpMessageOpt(
"-checkpoints", strprintf("Only accept block chain matching "
"built-in checkpoints (default: %d)",
DEFAULT_CHECKPOINTS_ENABLED));
- strUsage += HelpMessageOpt(
- "-disablesafemode", strprintf("Disable safemode, override a real "
- "safe mode event (default: %d)",
- DEFAULT_DISABLE_SAFEMODE));
strUsage +=
HelpMessageOpt("-deprecatedrpc=",
"Allows deprecated RPC method(s) to be used");
- strUsage += HelpMessageOpt(
- "-testsafemode",
- strprintf("Force safe mode (default: %d)", DEFAULT_TESTSAFEMODE));
strUsage +=
HelpMessageOpt("-dropmessagestest=",
"Randomly drop 1 of every network messages");
strUsage += HelpMessageOpt(
"-stopafterblockimport",
strprintf(
"Stop running after importing blocks from disk (default: %d)",
DEFAULT_STOPAFTERBLOCKIMPORT));
strUsage += HelpMessageOpt(
"-stopatheight", strprintf("Stop running after reaching the given "
"height in the main chain (default: %u)",
DEFAULT_STOPATHEIGHT));
strUsage += HelpMessageOpt(
"-limitancestorcount=",
strprintf("Do not accept transactions if number of in-mempool "
"ancestors is or more (default: %u)",
DEFAULT_ANCESTOR_LIMIT));
strUsage +=
HelpMessageOpt("-limitancestorsize=",
strprintf("Do not accept transactions whose size "
"with all in-mempool ancestors exceeds "
" kilobytes (default: %u)",
DEFAULT_ANCESTOR_SIZE_LIMIT));
strUsage += HelpMessageOpt(
"-limitdescendantcount=",
strprintf("Do not accept transactions if any ancestor would have "
" or more in-mempool descendants (default: %u)",
DEFAULT_DESCENDANT_LIMIT));
strUsage += HelpMessageOpt(
"-limitdescendantsize=",
strprintf("Do not accept transactions if any ancestor would have "
"more than kilobytes of in-mempool descendants "
"(default: %u).",
DEFAULT_DESCENDANT_SIZE_LIMIT));
strUsage += HelpMessageOpt("-addrmantest",
"Allows to test address relay on localhost");
}
strUsage += HelpMessageOpt(
"-debug=",
strprintf(_("Output debugging information (default: %u, supplying "
" is optional)"),
0) +
". " +
_("If is not supplied or if = 1, output all "
"debugging information.") +
_(" can be:") + " " + ListLogCategories() + ".");
strUsage += HelpMessageOpt(
"-debugexclude=",
strprintf(_("Exclude debugging information for a category. Can be used "
"in conjunction with -debug=1 to output debug logs for all "
"categories except one or more specified categories.")));
if (showDebug) {
strUsage += HelpMessageOpt(
"-nodebug", "Turn off debugging messages, same as -debug=0");
}
strUsage += HelpMessageOpt(
"-help-debug",
_("Show all debugging options (usage: --help -help-debug)"));
strUsage += HelpMessageOpt(
"-logips",
strprintf(_("Include IP addresses in debug output (default: %d)"),
DEFAULT_LOGIPS));
strUsage += HelpMessageOpt(
"-logtimestamps",
strprintf(_("Prepend debug output with timestamp (default: %d)"),
DEFAULT_LOGTIMESTAMPS));
if (showDebug) {
strUsage += HelpMessageOpt(
"-logtimemicros",
strprintf(
"Add microsecond precision to debug timestamps (default: %d)",
DEFAULT_LOGTIMEMICROS));
strUsage += HelpMessageOpt(
"-mocktime=",
"Replace actual time with seconds since epoch (default: 0)");
strUsage += HelpMessageOpt(
"-limitfreerelay=",
strprintf("Continuously rate-limit free transactions to *1000 "
"bytes per minute (default: %u)",
DEFAULT_LIMITFREERELAY));
strUsage +=
HelpMessageOpt("-relaypriority",
strprintf("Require high priority for relaying free "
"or low-fee transactions (default: %d)",
DEFAULT_RELAYPRIORITY));
strUsage += HelpMessageOpt(
"-maxsigcachesize=",
strprintf("Limit size of signature cache to MiB (default: %u)",
DEFAULT_MAX_SIG_CACHE_SIZE));
strUsage += HelpMessageOpt(
"-maxscriptcachesize=",
strprintf("Limit size of script cache to MiB (default: %u)",
DEFAULT_MAX_SCRIPT_CACHE_SIZE));
strUsage += HelpMessageOpt(
"-maxtipage=",
strprintf("Maximum tip age in seconds to consider node in initial "
"block download (default: %u)",
DEFAULT_MAX_TIP_AGE));
}
strUsage += HelpMessageOpt(
"-excessutxocharge=",
strprintf(_("Fees (in %s/kB) to charge per utxo created for"
"relaying, and mining (default: %s)"),
CURRENCY_UNIT, FormatMoney(DEFAULT_UTXO_FEE)));
strUsage += HelpMessageOpt(
"-minrelaytxfee=",
strprintf(
_("Fees (in %s/kB) smaller than this are considered zero fee for "
"relaying, mining and transaction creation (default: %s)"),
CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE_PER_KB)));
strUsage += HelpMessageOpt(
"-maxtxfee=",
strprintf(_("Maximum total fees (in %s) to use in a single wallet "
"transaction or raw transaction; setting this too low may "
"abort large transactions (default: %s)"),
CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE)));
strUsage += HelpMessageOpt(
"-printtoconsole",
_("Send trace/debug info to console instead of debug.log file"));
if (showDebug) {
strUsage += HelpMessageOpt(
"-printpriority", strprintf("Log transaction priority and fee per "
"kB when mining blocks (default: %d)",
DEFAULT_PRINTPRIORITY));
}
strUsage += HelpMessageOpt("-shrinkdebugfile",
_("Shrink debug.log file on client startup "
"(default: 1 when no -debug)"));
AppendParamsHelpMessages(strUsage, showDebug);
strUsage += HelpMessageGroup(_("Node relay options:"));
if (showDebug) {
strUsage += HelpMessageOpt(
"-acceptnonstdtxn",
strprintf(
"Relay and mine \"non-standard\" transactions (%sdefault: %u)",
"testnet/regtest only; ",
defaultChainParams->RequireStandard()));
strUsage +=
HelpMessageOpt("-excessiveblocksize=",
strprintf(_("Do not accept blocks larger than this "
"limit, in bytes (default: %d)"),
DEFAULT_MAX_BLOCK_SIZE));
strUsage += HelpMessageOpt(
"-dustrelayfee=",
strprintf("Fee rate (in %s/kB) used to defined dust, the value of "
"an output such that it will cost about 1/3 of its value "
"in fees at this fee rate to spend it. (default: %s)",
CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE)));
}
strUsage +=
HelpMessageOpt("-bytespersigop",
strprintf(_("Equivalent bytes per sigop in transactions "
"for relay and mining (default: %u)"),
DEFAULT_BYTES_PER_SIGOP));
strUsage += HelpMessageOpt(
"-datacarrier",
strprintf(_("Relay and mine data carrier transactions (default: %d)"),
DEFAULT_ACCEPT_DATACARRIER));
strUsage += HelpMessageOpt(
"-datacarriersize",
strprintf(_("Maximum size of data in data carrier transactions we "
"relay and mine (default: %u)"),
MAX_OP_RETURN_RELAY));
strUsage += HelpMessageGroup(_("Block creation options:"));
strUsage += HelpMessageOpt(
"-blockmaxsize=",
strprintf(_("Set maximum block size in bytes (default: %d)"),
DEFAULT_MAX_GENERATED_BLOCK_SIZE));
strUsage += HelpMessageOpt(
"-blockprioritypercentage=",
strprintf(_("Set maximum percentage of a block reserved to "
"high-priority/low-fee transactions (default: %d)"),
DEFAULT_BLOCK_PRIORITY_PERCENTAGE));
strUsage += HelpMessageOpt(
"-blockmintxfee=",
strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be "
"included in block creation. (default: %s)"),
CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE_PER_KB)));
if (showDebug) {
strUsage +=
HelpMessageOpt("-blockversion=",
"Override block version to test forking scenarios");
}
strUsage += HelpMessageGroup(_("RPC server options:"));
strUsage += HelpMessageOpt("-server",
_("Accept command line and JSON-RPC commands"));
strUsage += HelpMessageOpt(
"-rest", strprintf(_("Accept public REST requests (default: %d)"),
DEFAULT_REST_ENABLE));
strUsage += HelpMessageOpt(
"-rpcbind=",
_("Bind to given address to listen for JSON-RPC connections. Use "
"[host]:port notation for IPv6. This option can be specified "
"multiple times (default: bind to all interfaces)"));
strUsage +=
HelpMessageOpt("-rpccookiefile=",
_("Location of the auth cookie (default: data dir)"));
strUsage += HelpMessageOpt("-rpcuser=",
_("Username for JSON-RPC connections"));
strUsage += HelpMessageOpt("-rpcpassword=",
_("Password for JSON-RPC connections"));
strUsage += HelpMessageOpt(
"-rpcauth=",
_("Username and hashed password for JSON-RPC connections. The field "
" comes in the format: :$. A canonical "
"python script is included in share/rpcuser. The client then "
"connects normally using the "
"rpcuser=/rpcpassword= pair of arguments. This "
"option can be specified multiple times"));
strUsage += HelpMessageOpt(
"-rpcport=",
strprintf(_("Listen for JSON-RPC connections on (default: %u or "
"testnet: %u)"),
defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort()));
strUsage += HelpMessageOpt(
"-rpcallowip=",
_("Allow JSON-RPC connections from specified source. Valid for "
"are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. "
"1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This "
"option can be specified multiple times"));
strUsage += HelpMessageOpt(
"-rpcthreads=",
strprintf(
_("Set the number of threads to service RPC calls (default: %d)"),
DEFAULT_HTTP_THREADS));
strUsage += HelpMessageOpt(
"-rpccorsdomain=value",
"Domain from which to accept cross origin requests (browser enforced)");
if (showDebug) {
strUsage += HelpMessageOpt(
"-rpcworkqueue=", strprintf("Set the depth of the work queue to "
"service RPC calls (default: %d)",
DEFAULT_HTTP_WORKQUEUE));
strUsage += HelpMessageOpt(
"-rpcservertimeout=",
strprintf("Timeout during HTTP requests (default: %d)",
DEFAULT_HTTP_SERVER_TIMEOUT));
}
return strUsage;
}
std::string LicenseInfo() {
const std::string URL_SOURCE_CODE =
"";
const std::string URL_WEBSITE = "";
return CopyrightHolders(
strprintf(_("Copyright (C) %i-%i"), 2009, COPYRIGHT_YEAR) +
" ") +
"\n" + "\n" +
strprintf(_("Please contribute if you find %s useful. "
"Visit %s for further information about the software."),
PACKAGE_NAME, URL_WEBSITE) +
"\n" +
strprintf(_("The source code is available from %s."),
URL_SOURCE_CODE) +
"\n" + "\n" + _("This is experimental software.") + "\n" +
strprintf(_("Distributed under the MIT software license, see the "
"accompanying file %s or %s"),
"COPYING", "") +
"\n" + "\n" +
strprintf(_("This product includes software developed by the "
"OpenSSL Project for use in the OpenSSL Toolkit %s and "
"cryptographic software written by Eric Young and UPnP "
"software written by Thomas Bernard."),
"") +
"\n";
}
static void BlockNotifyCallback(bool initialSync,
const CBlockIndex *pBlockIndex) {
if (initialSync || !pBlockIndex) {
return;
}
std::string strCmd = gArgs.GetArg("-blocknotify", "");
if (!strCmd.empty()) {
boost::replace_all(strCmd, "%s", pBlockIndex->GetBlockHash().GetHex());
std::thread t(runCommand, strCmd);
// thread runs free
t.detach();
}
}
static bool fHaveGenesis = false;
static CWaitableCriticalSection cs_GenesisWait;
static CConditionVariable condvar_GenesisWait;
static void BlockNotifyGenesisWait(bool, const CBlockIndex *pBlockIndex) {
if (pBlockIndex != nullptr) {
{
LOCK(cs_GenesisWait);
fHaveGenesis = true;
}
condvar_GenesisWait.notify_all();
}
}
struct CImportingNow {
CImportingNow() {
assert(fImporting == false);
fImporting = true;
}
~CImportingNow() {
assert(fImporting == true);
fImporting = false;
}
};
// If we're using -prune with -reindex, then delete block files that will be
// ignored by the reindex. Since reindexing works by starting at block file 0
// and looping until a blockfile is missing, do the same here to delete any
// later block files after a gap. Also delete all rev files since they'll be
// rewritten by the reindex anyway. This ensures that vinfoBlockFile is in sync
// with what's actually on disk by the time we start downloading, so that
// pruning works correctly.
void CleanupBlockRevFiles() {
std::map mapBlockFiles;
// Glob all blk?????.dat and rev?????.dat files from the blocks directory.
// Remove the rev files immediately and insert the blk file paths into an
// ordered map keyed by block file index.
LogPrintf("Removing unusable blk?????.dat and rev?????.dat files for "
"-reindex with -prune\n");
fs::path blocksdir = GetDataDir() / "blocks";
for (fs::directory_iterator it(blocksdir); it != fs::directory_iterator();
it++) {
if (is_regular_file(*it) &&
it->path().filename().string().length() == 12 &&
it->path().filename().string().substr(8, 4) == ".dat") {
if (it->path().filename().string().substr(0, 3) == "blk") {
mapBlockFiles[it->path().filename().string().substr(3, 5)] =
it->path();
} else if (it->path().filename().string().substr(0, 3) == "rev") {
remove(it->path());
}
}
}
// Remove all block files that aren't part of a contiguous set starting at
// zero by walking the ordered map (keys are block file indices) by keeping
// a separate counter. Once we hit a gap (or if 0 doesn't exist) start
// removing block files.
int nContigCounter = 0;
for (const std::pair &item : mapBlockFiles) {
if (atoi(item.first) == nContigCounter) {
nContigCounter++;
continue;
}
remove(item.second);
}
}
void ThreadImport(const Config &config, std::vector vImportFiles) {
RenameThread("bitcoin-loadblk");
{
CImportingNow imp;
// -reindex
if (fReindex) {
int nFile = 0;
while (true) {
CDiskBlockPos pos(nFile, 0);
if (!fs::exists(GetBlockPosFilename(pos, "blk"))) {
// No block files left to reindex
break;
}
FILE *file = OpenBlockFile(pos, true);
if (!file) {
// This error is logged in OpenBlockFile
break;
}
LogPrintf("Reindexing block file blk%05u.dat...\n",
(unsigned int)nFile);
LoadExternalBlockFile(config, file, &pos);
nFile++;
}
pblocktree->WriteReindexing(false);
fReindex = false;
LogPrintf("Reindexing finished\n");
// To avoid ending up in a situation without genesis block, re-try
// initializing (no-op if reindexing worked):
LoadGenesisBlock(config.GetChainParams());
}
// hardcoded $DATADIR/bootstrap.dat
fs::path pathBootstrap = GetDataDir() / "bootstrap.dat";
if (fs::exists(pathBootstrap)) {
FILE *file = fsbridge::fopen(pathBootstrap, "rb");
if (file) {
fs::path pathBootstrapOld = GetDataDir() / "bootstrap.dat.old";
LogPrintf("Importing bootstrap.dat...\n");
LoadExternalBlockFile(config, file);
RenameOver(pathBootstrap, pathBootstrapOld);
} else {
LogPrintf("Warning: Could not open bootstrap file %s\n",
pathBootstrap.string());
}
}
// -loadblock=
for (const fs::path &path : vImportFiles) {
FILE *file = fsbridge::fopen(path, "rb");
if (file) {
LogPrintf("Importing blocks file %s...\n", path.string());
LoadExternalBlockFile(config, file);
} else {
LogPrintf("Warning: Could not open blocks file %s\n",
path.string());
}
}
// scan for better chains in the block chain database, that are not yet
// connected in the active best chain
CValidationState state;
if (!ActivateBestChain(config, state)) {
LogPrintf("Failed to connect best block");
StartShutdown();
}
if (gArgs.GetBoolArg("-stopafterblockimport",
DEFAULT_STOPAFTERBLOCKIMPORT)) {
LogPrintf("Stopping after block import\n");
StartShutdown();
}
} // End scope of CImportingNow
if (gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) {
LoadMempool(config);
fDumpMempoolLater = !fRequestShutdown;
}
}
/** Sanity checks
* Ensure that Bitcoin is running in a usable environment with all
* necessary library support.
*/
bool InitSanityCheck(void) {
if (!ECC_InitSanityCheck()) {
InitError(
"Elliptic curve cryptography sanity check failure. Aborting.");
return false;
}
if (!glibc_sanity_test() || !glibcxx_sanity_test()) {
return false;
}
if (!Random_SanityCheck()) {
InitError("OS cryptographic RNG sanity check failure. Aborting.");
return false;
}
return true;
}
static bool AppInitServers(Config &config,
HTTPRPCRequestProcessor &httpRPCRequestProcessor) {
RPCServerSignals::OnStarted(&OnRPCStarted);
RPCServerSignals::OnStopped(&OnRPCStopped);
if (!InitHTTPServer(config)) {
return false;
}
if (!StartRPC()) {
return false;
}
if (!StartHTTPRPC(config, httpRPCRequestProcessor)) {
return false;
}
if (gArgs.GetBoolArg("-rest", DEFAULT_REST_ENABLE) && !StartREST()) {
return false;
}
if (!StartHTTPServer()) {
return false;
}
return true;
}
// Parameter interaction based on rules
void InitParameterInteraction() {
// when specifying an explicit binding address, you want to listen on it
// even when -connect or -proxy is specified.
if (gArgs.IsArgSet("-bind")) {
if (gArgs.SoftSetBoolArg("-listen", true)) {
LogPrintf(
"%s: parameter interaction: -bind set -> setting -listen=1\n",
__func__);
}
}
if (gArgs.IsArgSet("-whitebind")) {
if (gArgs.SoftSetBoolArg("-listen", true)) {
LogPrintf("%s: parameter interaction: -whitebind set -> setting "
"-listen=1\n",
__func__);
}
}
if (gArgs.IsArgSet("-connect")) {
// when only connecting to trusted nodes, do not seed via DNS, or listen
// by default.
if (gArgs.SoftSetBoolArg("-dnsseed", false)) {
LogPrintf("%s: parameter interaction: -connect set -> setting "
"-dnsseed=0\n",
__func__);
}
if (gArgs.SoftSetBoolArg("-listen", false)) {
LogPrintf("%s: parameter interaction: -connect set -> setting "
"-listen=0\n",
__func__);
}
}
if (gArgs.IsArgSet("-proxy")) {
// to protect privacy, do not listen by default if a default proxy
// server is specified.
if (gArgs.SoftSetBoolArg("-listen", false)) {
LogPrintf(
"%s: parameter interaction: -proxy set -> setting -listen=0\n",
__func__);
}
// to protect privacy, do not use UPNP when a proxy is set. The user may
// still specify -listen=1 to listen locally, so don't rely on this
// happening through -listen below.
if (gArgs.SoftSetBoolArg("-upnp", false)) {
LogPrintf(
"%s: parameter interaction: -proxy set -> setting -upnp=0\n",
__func__);
}
// to protect privacy, do not discover addresses by default
if (gArgs.SoftSetBoolArg("-discover", false)) {
LogPrintf("%s: parameter interaction: -proxy set -> setting "
"-discover=0\n",
__func__);
}
}
if (!gArgs.GetBoolArg("-listen", DEFAULT_LISTEN)) {
// do not map ports or try to retrieve public IP when not listening
// (pointless)
if (gArgs.SoftSetBoolArg("-upnp", false)) {
LogPrintf(
"%s: parameter interaction: -listen=0 -> setting -upnp=0\n",
__func__);
}
if (gArgs.SoftSetBoolArg("-discover", false)) {
LogPrintf(
"%s: parameter interaction: -listen=0 -> setting -discover=0\n",
__func__);
}
if (gArgs.SoftSetBoolArg("-listenonion", false)) {
LogPrintf("%s: parameter interaction: -listen=0 -> setting "
"-listenonion=0\n",
__func__);
}
}
if (gArgs.IsArgSet("-externalip")) {
// if an explicit public IP is specified, do not try to find others
if (gArgs.SoftSetBoolArg("-discover", false)) {
LogPrintf("%s: parameter interaction: -externalip set -> setting "
"-discover=0\n",
__func__);
}
}
// disable whitelistrelay in blocksonly mode
if (gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY)) {
if (gArgs.SoftSetBoolArg("-whitelistrelay", false)) {
LogPrintf("%s: parameter interaction: -blocksonly=1 -> setting "
"-whitelistrelay=0\n",
__func__);
}
}
// Forcing relay from whitelisted hosts implies we will accept relays from
// them in the first place.
if (gArgs.GetBoolArg("-whitelistforcerelay", DEFAULT_WHITELISTFORCERELAY)) {
if (gArgs.SoftSetBoolArg("-whitelistrelay", true)) {
LogPrintf("%s: parameter interaction: -whitelistforcerelay=1 -> "
"setting -whitelistrelay=1\n",
__func__);
}
}
// Warn if network-specific options (-addnode, -connect, etc) are
// specified in default section of config file, but not overridden
// on the command line or in this network's section of the config file.
gArgs.WarnForSectionOnlyArgs();
}
static std::string ResolveErrMsg(const char *const optname,
const std::string &strBind) {
return strprintf(_("Cannot resolve -%s address: '%s'"), optname, strBind);
}
void InitLogging() {
BCLog::Logger &logger = GetLogger();
logger.m_print_to_console = gArgs.GetBoolArg("-printtoconsole", false);
logger.m_log_timestamps =
gArgs.GetBoolArg("-logtimestamps", DEFAULT_LOGTIMESTAMPS);
logger.m_log_time_micros =
gArgs.GetBoolArg("-logtimemicros", DEFAULT_LOGTIMEMICROS);
fLogIPs = gArgs.GetBoolArg("-logips", DEFAULT_LOGIPS);
LogPrintf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n");
LogPrintf("%s version %s\n", CLIENT_NAME, FormatFullVersion());
}
namespace { // Variables internal to initialization process only
int nMaxConnections;
int nUserMaxConnections;
int nFD;
ServiceFlags nLocalServices = ServiceFlags(NODE_NETWORK | NODE_NETWORK_LIMITED);
} // namespace
[[noreturn]] static void new_handler_terminate() {
// Rather than throwing std::bad-alloc if allocation fails, terminate
// immediately to (try to) avoid chain corruption. Since LogPrintf may
// itself allocate memory, set the handler directly to terminate first.
std::set_new_handler(std::terminate);
LogPrintf("Error: Out of memory. Terminating.\n");
// The log was successful, terminate now.
std::terminate();
};
bool AppInitBasicSetup() {
// Step 1: setup
#ifdef _MSC_VER
// Turn off Microsoft heap dump noise
_CrtSetReportMode(_CRT_WARN, _CRTDBG_MODE_FILE);
_CrtSetReportFile(_CRT_WARN, CreateFileA("NUL", GENERIC_WRITE, 0, nullptr,
OPEN_EXISTING, 0, 0));
#endif
#if _MSC_VER >= 1400
// Disable confusing "helpful" text message on abort, Ctrl-C
_set_abort_behavior(0, _WRITE_ABORT_MSG | _CALL_REPORTFAULT);
#endif
#ifdef WIN32
// Enable Data Execution Prevention (DEP)
// Minimum supported OS versions: WinXP SP3, WinVista >= SP1, Win Server 2008
// A failure is non-critical and needs no further attention!
#ifndef PROCESS_DEP_ENABLE
// We define this here, because GCCs winbase.h limits this to _WIN32_WINNT >=
// 0x0601 (Windows 7), which is not correct. Can be removed, when GCCs winbase.h
// is fixed!
#define PROCESS_DEP_ENABLE 0x00000001
#endif
typedef BOOL(WINAPI * PSETPROCDEPPOL)(DWORD);
PSETPROCDEPPOL setProcDEPPol = (PSETPROCDEPPOL)GetProcAddress(
GetModuleHandleA("Kernel32.dll"), "SetProcessDEPPolicy");
if (setProcDEPPol != nullptr) {
setProcDEPPol(PROCESS_DEP_ENABLE);
}
#endif
if (!SetupNetworking()) {
return InitError("Initializing networking failed");
}
#ifndef WIN32
if (!gArgs.GetBoolArg("-sysperms", false)) {
umask(077);
}
// Clean shutdown on SIGTERM
struct sigaction sa;
sa.sa_handler = HandleSIGTERM;
sigemptyset(&sa.sa_mask);
sa.sa_flags = 0;
sigaction(SIGTERM, &sa, nullptr);
sigaction(SIGINT, &sa, nullptr);
// Reopen debug.log on SIGHUP
struct sigaction sa_hup;
sa_hup.sa_handler = HandleSIGHUP;
sigemptyset(&sa_hup.sa_mask);
sa_hup.sa_flags = 0;
sigaction(SIGHUP, &sa_hup, nullptr);
// Ignore SIGPIPE, otherwise it will bring the daemon down if the client
// closes unexpectedly
signal(SIGPIPE, SIG_IGN);
#endif
std::set_new_handler(new_handler_terminate);
return true;
}
bool AppInitParameterInteraction(Config &config, RPCServer &rpcServer) {
const CChainParams &chainparams = config.GetChainParams();
// Step 2: parameter interactions
// also see: InitParameterInteraction()
// if using block pruning, then disallow txindex
if (gArgs.GetArg("-prune", 0)) {
if (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) {
return InitError(_("Prune mode is incompatible with -txindex."));
}
}
// if space reserved for high priority transactions is misconfigured
// stop program execution and warn the user with a proper error message
const int64_t blkprio = gArgs.GetArg("-blockprioritypercentage",
DEFAULT_BLOCK_PRIORITY_PERCENTAGE);
if (!config.SetBlockPriorityPercentage(blkprio)) {
return InitError(_("Block priority percentage has to belong to the "
"[0..100] interval."));
}
// -bind and -whitebind can't be set when not listening
size_t nUserBind =
gArgs.GetArgs("-bind").size() + gArgs.GetArgs("-whitebind").size();
if (nUserBind != 0 && !gArgs.GetBoolArg("-listen", DEFAULT_LISTEN)) {
return InitError(
"Cannot set -bind or -whitebind together with -listen=0");
}
// Make sure enough file descriptors are available
int nBind = std::max(nUserBind, size_t(1));
nUserMaxConnections =
gArgs.GetArg("-maxconnections", DEFAULT_MAX_PEER_CONNECTIONS);
nMaxConnections = std::max(nUserMaxConnections, 0);
// Trim requested connection counts, to fit into system limitations
nMaxConnections =
std::max(std::min(nMaxConnections,
(int)(FD_SETSIZE - nBind - MIN_CORE_FILEDESCRIPTORS -
MAX_ADDNODE_CONNECTIONS)),
0);
nFD = RaiseFileDescriptorLimit(nMaxConnections + MIN_CORE_FILEDESCRIPTORS +
MAX_ADDNODE_CONNECTIONS);
if (nFD < MIN_CORE_FILEDESCRIPTORS) {
return InitError(_("Not enough file descriptors available."));
}
nMaxConnections =
std::min(nFD - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS,
nMaxConnections);
if (nMaxConnections < nUserMaxConnections) {
InitWarning(strprintf(_("Reducing -maxconnections from %d to %d, "
"because of system limitations."),
nUserMaxConnections, nMaxConnections));
}
// Step 3: parameter-to-internal-flags
if (gArgs.IsArgSet("-debug")) {
// Special-case: if -debug=0/-nodebug is set, turn off debugging
// messages
const std::vector &categories = gArgs.GetArgs("-debug");
if (find(categories.begin(), categories.end(), std::string("0")) ==
categories.end()) {
for (const auto &cat : categories) {
BCLog::LogFlags flag;
if (!GetLogCategory(flag, cat)) {
InitWarning(
strprintf(_("Unsupported logging category %s=%s."),
"-debug", cat));
}
GetLogger().EnableCategory(flag);
}
}
}
// Now remove the logging categories which were explicitly excluded
for (const std::string &cat : gArgs.GetArgs("-debugexclude")) {
BCLog::LogFlags flag;
if (!GetLogCategory(flag, cat)) {
InitWarning(strprintf(_("Unsupported logging category %s=%s."),
"-debugexclude", cat));
}
GetLogger().DisableCategory(flag);
}
// Check for -debugnet
if (gArgs.GetBoolArg("-debugnet", false)) {
InitWarning(
_("Unsupported argument -debugnet ignored, use -debug=net."));
}
// Check for -socks - as this is a privacy risk to continue, exit here
if (gArgs.IsArgSet("-socks")) {
return InitError(
_("Unsupported argument -socks found. Setting SOCKS version isn't "
"possible anymore, only SOCKS5 proxies are supported."));
}
// Check for -tor - as this is a privacy risk to continue, exit here
if (gArgs.GetBoolArg("-tor", false)) {
return InitError(_("Unsupported argument -tor found, use -onion."));
}
if (gArgs.GetBoolArg("-benchmark", false)) {
InitWarning(
_("Unsupported argument -benchmark ignored, use -debug=bench."));
}
if (gArgs.GetBoolArg("-whitelistalwaysrelay", false)) {
InitWarning(_("Unsupported argument -whitelistalwaysrelay ignored, use "
"-whitelistrelay and/or -whitelistforcerelay."));
}
if (gArgs.IsArgSet("-blockminsize")) {
InitWarning("Unsupported argument -blockminsize ignored.");
}
// Checkmempool and checkblockindex default to true in regtest mode
int ratio = std::min(
std::max(
gArgs.GetArg("-checkmempool",
chainparams.DefaultConsistencyChecks() ? 1 : 0),
0),
1000000);
if (ratio != 0) {
g_mempool.setSanityCheck(1.0 / ratio);
}
fCheckBlockIndex = gArgs.GetBoolArg("-checkblockindex",
chainparams.DefaultConsistencyChecks());
fCheckpointsEnabled =
gArgs.GetBoolArg("-checkpoints", DEFAULT_CHECKPOINTS_ENABLED);
if (fCheckpointsEnabled) {
LogPrintf("Checkpoints will be verified.\n");
} else {
LogPrintf("Skipping checkpoint verification.\n");
}
hashAssumeValid = uint256S(
gArgs.GetArg("-assumevalid",
chainparams.GetConsensus().defaultAssumeValid.GetHex()));
if (!hashAssumeValid.IsNull()) {
LogPrintf("Assuming ancestors of block %s have valid signatures.\n",
hashAssumeValid.GetHex());
} else {
LogPrintf("Validating signatures for all blocks.\n");
}
if (gArgs.IsArgSet("-minimumchainwork")) {
const std::string minChainWorkStr =
gArgs.GetArg("-minimumchainwork", "");
if (!IsHexNumber(minChainWorkStr)) {
return InitError(strprintf(
"Invalid non-hex (%s) minimum chain work value specified",
minChainWorkStr));
}
nMinimumChainWork = UintToArith256(uint256S(minChainWorkStr));
} else {
nMinimumChainWork =
UintToArith256(chainparams.GetConsensus().nMinimumChainWork);
}
LogPrintf("Setting nMinimumChainWork=%s\n", nMinimumChainWork.GetHex());
if (nMinimumChainWork <
UintToArith256(chainparams.GetConsensus().nMinimumChainWork)) {
LogPrintf("Warning: nMinimumChainWork set below default value of %s\n",
chainparams.GetConsensus().nMinimumChainWork.GetHex());
}
// mempool limits
int64_t nMempoolSizeMax =
gArgs.GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000;
int64_t nMempoolSizeMin =
gArgs.GetArg("-limitdescendantsize", DEFAULT_DESCENDANT_SIZE_LIMIT) *
1000 * 40;
if (nMempoolSizeMax < 0 || nMempoolSizeMax < nMempoolSizeMin) {
return InitError(strprintf(_("-maxmempool must be at least %d MB"),
std::ceil(nMempoolSizeMin / 1000000.0)));
}
// -par=0 means autodetect, but nScriptCheckThreads==0 means no concurrency
nScriptCheckThreads = gArgs.GetArg("-par", DEFAULT_SCRIPTCHECK_THREADS);
if (nScriptCheckThreads <= 0) {
nScriptCheckThreads += GetNumCores();
}
if (nScriptCheckThreads <= 1) {
nScriptCheckThreads = 0;
} else if (nScriptCheckThreads > MAX_SCRIPTCHECK_THREADS) {
nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS;
}
// Configure excessive block size.
const uint64_t nProposedExcessiveBlockSize =
gArgs.GetArg("-excessiveblocksize", DEFAULT_MAX_BLOCK_SIZE);
if (!config.SetMaxBlockSize(nProposedExcessiveBlockSize)) {
return InitError(
_("Excessive block size must be > 1,000,000 bytes (1MB)"));
}
// Check blockmaxsize does not exceed maximum accepted block size.
const uint64_t nProposedMaxGeneratedBlockSize =
gArgs.GetArg("-blockmaxsize", DEFAULT_MAX_GENERATED_BLOCK_SIZE);
if (nProposedMaxGeneratedBlockSize > config.GetMaxBlockSize()) {
auto msg = _("Max generated block size (blockmaxsize) cannot exceed "
"the excessive block size (excessiveblocksize)");
return InitError(msg);
}
// block pruning; get the amount of disk space (in MiB) to allot for block &
// undo files
int64_t nPruneArg = gArgs.GetArg("-prune", 0);
if (nPruneArg < 0) {
return InitError(
_("Prune cannot be configured with a negative value."));
}
nPruneTarget = (uint64_t)nPruneArg * 1024 * 1024;
if (nPruneArg == 1) {
// manual pruning: -prune=1
LogPrintf("Block pruning enabled. Use RPC call "
"pruneblockchain(height) to manually prune block and undo "
"files.\n");
nPruneTarget = std::numeric_limits::max();
fPruneMode = true;
} else if (nPruneTarget) {
if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) {
return InitError(
strprintf(_("Prune configured below the minimum of %d MiB. "
"Please use a higher number."),
MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
}
LogPrintf("Prune configured to target %uMiB on disk for block and undo "
"files.\n",
nPruneTarget / 1024 / 1024);
fPruneMode = true;
}
RegisterAllRPCCommands(config, rpcServer, tableRPC);
g_wallet_init_interface->RegisterRPC(tableRPC);
#ifdef ENABLE_WALLET
RegisterDumpRPCCommands(tableRPC);
#endif
nConnectTimeout = gArgs.GetArg("-timeout", DEFAULT_CONNECT_TIMEOUT);
if (nConnectTimeout <= 0) {
nConnectTimeout = DEFAULT_CONNECT_TIMEOUT;
}
// Obtain the amount to charge excess UTXO
if (gArgs.IsArgSet("-excessutxocharge")) {
Amount n = Amount::zero();
auto parsed = ParseMoney(gArgs.GetArg("-excessutxocharge", ""), n);
if (!parsed || Amount::zero() > n) {
return InitError(AmountErrMsg(
"excessutxocharge", gArgs.GetArg("-excessutxocharge", "")));
}
config.SetExcessUTXOCharge(n);
} else {
config.SetExcessUTXOCharge(DEFAULT_UTXO_FEE);
}
// Fee-per-kilobyte amount considered the same as "free". If you are mining,
// be careful setting this: if you set it to zero then a transaction spammer
// can cheaply fill blocks using 1-satoshi-fee transactions. It should be
// set above the real cost to you of processing a transaction.
if (gArgs.IsArgSet("-minrelaytxfee")) {
Amount n = Amount::zero();
auto parsed = ParseMoney(gArgs.GetArg("-minrelaytxfee", ""), n);
if (!parsed || Amount::zero() == n) {
return InitError(AmountErrMsg("minrelaytxfee",
gArgs.GetArg("-minrelaytxfee", "")));
}
// High fee check is done afterward in WalletParameterInteraction()
config.SetMinFeePerKB(CFeeRate(n));
} else {
config.SetMinFeePerKB(CFeeRate(DEFAULT_MIN_RELAY_TX_FEE_PER_KB));
}
// Sanity check argument for min fee for including tx in block
// TODO: Harmonize which arguments need sanity checking and where that
// happens.
if (gArgs.IsArgSet("-blockmintxfee")) {
Amount n = Amount::zero();
if (!ParseMoney(gArgs.GetArg("-blockmintxfee", ""), n)) {
return InitError(AmountErrMsg("blockmintxfee",
gArgs.GetArg("-blockmintxfee", "")));
}
}
// Feerate used to define dust. Shouldn't be changed lightly as old
// implementations may inadvertently create non-standard transactions.
if (gArgs.IsArgSet("-dustrelayfee")) {
Amount n = Amount::zero();
auto parsed = ParseMoney(gArgs.GetArg("-dustrelayfee", ""), n);
if (!parsed || Amount::zero() == n) {
return InitError(AmountErrMsg("dustrelayfee",
gArgs.GetArg("-dustrelayfee", "")));
}
dustRelayFee = CFeeRate(n);
}
fRequireStandard =
!gArgs.GetBoolArg("-acceptnonstdtxn", !chainparams.RequireStandard());
if (chainparams.RequireStandard() && !fRequireStandard) {
return InitError(
strprintf("acceptnonstdtxn is not currently supported for %s chain",
chainparams.NetworkIDString()));
}
nBytesPerSigOp = gArgs.GetArg("-bytespersigop", nBytesPerSigOp);
if (!g_wallet_init_interface->ParameterInteraction()) {
return false;
}
fIsBareMultisigStd =
gArgs.GetBoolArg("-permitbaremultisig", DEFAULT_PERMIT_BAREMULTISIG);
fAcceptDatacarrier =
gArgs.GetBoolArg("-datacarrier", DEFAULT_ACCEPT_DATACARRIER);
// Option to startup with mocktime set (used for regression testing):
SetMockTime(gArgs.GetArg("-mocktime", 0)); // SetMockTime(0) is a no-op
if (gArgs.GetBoolArg("-peerbloomfilters", DEFAULT_PEERBLOOMFILTERS)) {
nLocalServices = ServiceFlags(nLocalServices | NODE_BLOOM);
}
// Signal Bitcoin Cash support.
// TODO: remove some time after the hardfork when no longer needed
// to differentiate the network nodes.
nLocalServices = ServiceFlags(nLocalServices | NODE_BITCOIN_CASH);
nMaxTipAge = gArgs.GetArg("-maxtipage", DEFAULT_MAX_TIP_AGE);
return true;
}
static bool LockDataDirectory(bool probeOnly) {
// Make sure only a single Bitcoin process is using the data directory.
fs::path datadir = GetDataDir();
if (!DirIsWritable(datadir)) {
return InitError(strprintf(
_("Cannot write to data directory '%s'; check permissions."),
datadir.string()));
}
if (!LockDirectory(datadir, ".lock", probeOnly)) {
return InitError(strprintf(_("Cannot obtain a lock on data directory "
"%s. %s is probably already running."),
datadir.string(), _(PACKAGE_NAME)));
}
return true;
}
bool AppInitSanityChecks() {
// Step 4: sanity checks
// Initialize elliptic curve code
std::string sha256_algo = SHA256AutoDetect();
LogPrintf("Using the '%s' SHA256 implementation\n", sha256_algo);
RandomInit();
ECC_Start();
globalVerifyHandle.reset(new ECCVerifyHandle());
// Sanity check
if (!InitSanityCheck()) {
return InitError(strprintf(
_("Initialization sanity check failed. %s is shutting down."),
_(PACKAGE_NAME)));
}
// Probe the data directory lock to give an early error message, if possible
// We cannot hold the data directory lock here, as the forking for daemon()
// hasn't yet happened, and a fork will cause weird behavior to it.
return LockDataDirectory(true);
}
bool AppInitLockDataDirectory() {
// After daemonization get the data directory lock again and hold on to it
// until exit. This creates a slight window for a race condition to happen,
// however this condition is harmless: it will at most make us exit without
// printing a message to console.
if (!LockDataDirectory(false)) {
// Detailed error printed inside LockDataDirectory
return false;
}
return true;
}
bool AppInitMain(Config &config,
HTTPRPCRequestProcessor &httpRPCRequestProcessor) {
// Step 4a: application initialization
const CChainParams &chainparams = config.GetChainParams();
#ifndef WIN32
CreatePidFile(GetPidFile(), getpid());
#endif
BCLog::Logger &logger = GetLogger();
bool default_shrinkdebugfile = logger.DefaultShrinkDebugFile();
if (gArgs.GetBoolArg("-shrinkdebugfile", default_shrinkdebugfile)) {
// Do this first since it both loads a bunch of debug.log into memory,
// and because this needs to happen before any other debug.log printing.
logger.ShrinkDebugFile();
}
if (logger.m_print_to_file) {
if (!logger.OpenDebugLog()) {
return InitError(strprintf("Could not open debug log file %s",
logger.GetDebugLogPath().string()));
}
}
if (!logger.m_log_timestamps) {
LogPrintf("Startup time: %s\n", FormatISO8601DateTime(GetTime()));
}
LogPrintf("Default data directory %s\n", GetDefaultDataDir().string());
LogPrintf("Using data directory %s\n", GetDataDir().string());
LogPrintf(
"Using config file %s\n",
GetConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)).string());
LogPrintf("Using at most %i automatic connections (%i file descriptors "
"available)\n",
nMaxConnections, nFD);
// Warn about relative -datadir path.
if (gArgs.IsArgSet("-datadir") &&
!fs::path(gArgs.GetArg("-datadir", "")).is_absolute()) {
LogPrintf("Warning: relative datadir option '%s' specified, which will "
"be interpreted relative to the current working directory "
"'%s'. This is fragile, because if bitcoin is started in the "
"future from a different location, it will be unable to "
"locate the current data files. There could also be data "
"loss if bitcoin is started while in a temporary "
"directory.\n",
gArgs.GetArg("-datadir", ""), fs::current_path().string());
}
InitSignatureCache();
InitScriptExecutionCache();
LogPrintf("Using %u threads for script verification\n",
nScriptCheckThreads);
if (nScriptCheckThreads) {
for (int i = 0; i < nScriptCheckThreads - 1; i++) {
threadGroup.create_thread(&ThreadScriptCheck);
}
}
// Start the lightweight task scheduler thread
CScheduler::Function serviceLoop =
boost::bind(&CScheduler::serviceQueue, &scheduler);
threadGroup.create_thread(boost::bind(&TraceThread,
"scheduler", serviceLoop));
GetMainSignals().RegisterBackgroundSignalScheduler(scheduler);
GetMainSignals().RegisterWithMempoolSignals(g_mempool);
/**
* Start the RPC server. It will be started in "warmup" mode and not
* process calls yet (but it will verify that the server is there and will
* be ready later). Warmup mode will be completed when initialisation is
* finished.
*/
if (gArgs.GetBoolArg("-server", false)) {
uiInterface.InitMessage.connect(SetRPCWarmupStatus);
if (!AppInitServers(config, httpRPCRequestProcessor)) {
return InitError(
_("Unable to start HTTP server. See debug log for details."));
}
}
// Step 5: verify wallet database integrity
if (!g_wallet_init_interface->Verify(chainparams)) {
return false;
}
// Step 6: network initialization
// Note that we absolutely cannot open any actual connections
// until the very end ("start node") as the UTXO/block state
// is not yet setup and may end up being set up twice if we
// need to reindex later.
assert(!g_connman);
g_connman = std::unique_ptr(
new CConnman(config, GetRand(std::numeric_limits::max()),
GetRand(std::numeric_limits::max())));
CConnman &connman = *g_connman;
peerLogic.reset(new PeerLogicValidation(&connman, scheduler));
RegisterValidationInterface(peerLogic.get());
// sanitize comments per BIP-0014, format user agent and check total size
std::vector uacomments;
for (const std::string &cmt : gArgs.GetArgs("-uacomment")) {
if (cmt != SanitizeString(cmt, SAFE_CHARS_UA_COMMENT))
return InitError(strprintf(
_("User Agent comment (%s) contains unsafe characters."), cmt));
uacomments.push_back(cmt);
}
const std::string strSubVersion =
FormatSubVersion(CLIENT_NAME, CLIENT_VERSION, uacomments);
if (strSubVersion.size() > MAX_SUBVERSION_LENGTH) {
return InitError(strprintf(
_("Total length of network version string (%i) exceeds maximum "
"length (%i). Reduce the number or size of uacomments."),
strSubVersion.size(), MAX_SUBVERSION_LENGTH));
}
if (gArgs.IsArgSet("-onlynet")) {
std::set nets;
for (const std::string &snet : gArgs.GetArgs("-onlynet")) {
enum Network net = ParseNetwork(snet);
if (net == NET_UNROUTABLE) {
return InitError(strprintf(
_("Unknown network specified in -onlynet: '%s'"), snet));
}
nets.insert(net);
}
for (int n = 0; n < NET_MAX; n++) {
enum Network net = (enum Network)n;
if (!nets.count(net)) SetLimited(net);
}
}
// Check for host lookup allowed before parsing any network related
// parameters
fNameLookup = gArgs.GetBoolArg("-dns", DEFAULT_NAME_LOOKUP);
bool proxyRandomize =
gArgs.GetBoolArg("-proxyrandomize", DEFAULT_PROXYRANDOMIZE);
// -proxy sets a proxy for all outgoing network traffic
// -noproxy (or -proxy=0) as well as the empty string can be used to not set
// a proxy, this is the default
std::string proxyArg = gArgs.GetArg("-proxy", "");
SetLimited(NET_TOR);
if (proxyArg != "" && proxyArg != "0") {
CService proxyAddr;
if (!Lookup(proxyArg.c_str(), proxyAddr, 9050, fNameLookup)) {
return InitError(strprintf(
_("Invalid -proxy address or hostname: '%s'"), proxyArg));
}
proxyType addrProxy = proxyType(proxyAddr, proxyRandomize);
if (!addrProxy.IsValid()) {
return InitError(strprintf(
_("Invalid -proxy address or hostname: '%s'"), proxyArg));
}
SetProxy(NET_IPV4, addrProxy);
SetProxy(NET_IPV6, addrProxy);
SetProxy(NET_TOR, addrProxy);
SetNameProxy(addrProxy);
// by default, -proxy sets onion as reachable, unless -noonion later
SetLimited(NET_TOR, false);
}
// -onion can be used to set only a proxy for .onion, or override normal
// proxy for .onion addresses.
// -noonion (or -onion=0) disables connecting to .onion entirely. An empty
// string is used to not override the onion proxy (in which case it defaults
// to -proxy set above, or none)
std::string onionArg = gArgs.GetArg("-onion", "");
if (onionArg != "") {
if (onionArg == "0") { // Handle -noonion/-onion=0
SetLimited(NET_TOR); // set onions as unreachable
} else {
CService onionProxy;
if (!Lookup(onionArg.c_str(), onionProxy, 9050, fNameLookup)) {
return InitError(strprintf(
_("Invalid -onion address or hostname: '%s'"), onionArg));
}
proxyType addrOnion = proxyType(onionProxy, proxyRandomize);
if (!addrOnion.IsValid()) {
return InitError(strprintf(
_("Invalid -onion address or hostname: '%s'"), onionArg));
}
SetProxy(NET_TOR, addrOnion);
SetLimited(NET_TOR, false);
}
}
// see Step 2: parameter interactions for more information about these
fListen = gArgs.GetBoolArg("-listen", DEFAULT_LISTEN);
fDiscover = gArgs.GetBoolArg("-discover", true);
fRelayTxes = !gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY);
for (const std::string &strAddr : gArgs.GetArgs("-externalip")) {
CService addrLocal;
if (Lookup(strAddr.c_str(), addrLocal, GetListenPort(), fNameLookup) &&
addrLocal.IsValid()) {
AddLocal(addrLocal, LOCAL_MANUAL);
} else {
return InitError(ResolveErrMsg("externalip", strAddr));
}
}
#if ENABLE_ZMQ
pzmqNotificationInterface = CZMQNotificationInterface::Create();
if (pzmqNotificationInterface) {
RegisterValidationInterface(pzmqNotificationInterface);
}
#endif
// unlimited unless -maxuploadtarget is set
uint64_t nMaxOutboundLimit = 0;
uint64_t nMaxOutboundTimeframe = MAX_UPLOAD_TIMEFRAME;
if (gArgs.IsArgSet("-maxuploadtarget")) {
nMaxOutboundLimit =
gArgs.GetArg("-maxuploadtarget", DEFAULT_MAX_UPLOAD_TARGET) * 1024 *
1024;
}
// Step 7: load block chain
fReindex = gArgs.GetBoolArg("-reindex", false);
bool fReindexChainState = gArgs.GetBoolArg("-reindex-chainstate", false);
// cache size calculations
int64_t nTotalCache = (gArgs.GetArg("-dbcache", nDefaultDbCache) << 20);
// total cache cannot be less than nMinDbCache
nTotalCache = std::max(nTotalCache, nMinDbCache << 20);
// total cache cannot be greater than nMaxDbcache
nTotalCache = std::min(nTotalCache, nMaxDbCache << 20);
int64_t nBlockTreeDBCache = nTotalCache / 8;
nBlockTreeDBCache = std::min(nBlockTreeDBCache,
(gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)
? nMaxBlockDBAndTxIndexCache
: nMaxBlockDBCache)
<< 20);
nTotalCache -= nBlockTreeDBCache;
// use 25%-50% of the remainder for disk cache
int64_t nCoinDBCache =
std::min(nTotalCache / 2, (nTotalCache / 4) + (1 << 23));
// cap total coins db cache
nCoinDBCache = std::min(nCoinDBCache, nMaxCoinsDBCache << 20);
nTotalCache -= nCoinDBCache;
// the rest goes to in-memory cache
nCoinCacheUsage = nTotalCache;
int64_t nMempoolSizeMax =
gArgs.GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000;
LogPrintf("Cache configuration:\n");
LogPrintf("* Using %.1fMiB for block index database\n",
nBlockTreeDBCache * (1.0 / 1024 / 1024));
LogPrintf("* Using %.1fMiB for chain state database\n",
nCoinDBCache * (1.0 / 1024 / 1024));
LogPrintf("* Using %.1fMiB for in-memory UTXO set (plus up to %.1fMiB of "
"unused mempool space)\n",
nCoinCacheUsage * (1.0 / 1024 / 1024),
nMempoolSizeMax * (1.0 / 1024 / 1024));
int64_t nStart = 0;
bool fLoaded = false;
while (!fLoaded && !fRequestShutdown) {
bool fReset = fReindex;
std::string strLoadError;
uiInterface.InitMessage(_("Loading block index..."));
LOCK(cs_main);
nStart = GetTimeMillis();
do {
try {
UnloadBlockIndex();
pcoinsTip.reset();
pcoinsdbview.reset();
pcoinscatcher.reset();
pblocktree.reset(
new CBlockTreeDB(nBlockTreeDBCache, false, fReset));
if (fReindex) {
pblocktree->WriteReindexing(true);
// If we're reindexing in prune mode, wipe away unusable
// block files and all undo data files
if (fPruneMode) {
CleanupBlockRevFiles();
}
}
if (fRequestShutdown) {
break;
}
// LoadBlockIndex will load fTxIndex from the db, or set it if
// we're reindexing. It will also load fHavePruned if we've
// ever removed a block file from disk.
if (!LoadBlockIndex(config)) {
strLoadError = _("Error loading block database");
break;
}
// If the loaded chain has a wrong genesis, bail out immediately
// (we're likely using a testnet datadir, or the other way
// around).
if (!mapBlockIndex.empty() &&
!LookupBlockIndex(
chainparams.GetConsensus().hashGenesisBlock)) {
return InitError(_("Incorrect or no genesis block found. "
"Wrong datadir for network?"));
}
// Check for changed -txindex state
if (fTxIndex != gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) {
strLoadError = _("You need to rebuild the database using "
"-reindex-chainstate to change -txindex");
break;
}
// Check for changed -prune state. What we are concerned about
// is a user who has pruned blocks in the past, but is now
// trying to run unpruned.
if (fHavePruned && !fPruneMode) {
strLoadError =
_("You need to rebuild the database using -reindex to "
"go back to unpruned mode. This will redownload the "
"entire blockchain");
break;
}
// At this point blocktree args are consistent with what's on
// disk. If we're not mid-reindex (based on disk + args), add a
// genesis block on disk. This is called again in ThreadImport
// if the reindex completes.
if (!fReindex && !LoadGenesisBlock(chainparams)) {
strLoadError = _("Error initializing block database");
break;
}
// At this point we're either in reindex or we've loaded a
// useful block tree into mapBlockIndex!
pcoinsdbview.reset(new CCoinsViewDB(
nCoinDBCache, false, fReset || fReindexChainState));
pcoinscatcher.reset(
new CCoinsViewErrorCatcher(pcoinsdbview.get()));
// If necessary, upgrade from older database format.
// This is a no-op if we cleared the coinsviewdb with -reindex
// or -reindex-chainstate
if (!pcoinsdbview->Upgrade()) {
strLoadError = _("Error upgrading chainstate database");
break;
}
// ReplayBlocks is a no-op if we cleared the coinsviewdb with
// -reindex or -reindex-chainstate
if (!ReplayBlocks(config, pcoinsdbview.get())) {
strLoadError =
_("Unable to replay blocks. You will need to rebuild "
"the database using -reindex-chainstate.");
break;
}
// The on-disk coinsdb is now in a good state, create the cache
pcoinsTip.reset(new CCoinsViewCache(pcoinscatcher.get()));
if (!fReindex && !fReindexChainState) {
// LoadChainTip sets chainActive based on pcoinsTip's best
// block
if (!LoadChainTip(config)) {
strLoadError = _("Error initializing block database");
break;
}
assert(chainActive.Tip() != nullptr);
}
if (!fReindex) {
// Note that RewindBlockIndex MUST run even if we're about
// to -reindex-chainstate. It both disconnects blocks based
// on chainActive, and drops block data in mapBlockIndex
// based on lack of available witness data.
uiInterface.InitMessage(_("Rewinding blocks..."));
if (!RewindBlockIndex(config)) {
strLoadError = _("Unable to rewind the database to a "
"pre-fork state. You will need to "
"redownload the blockchain");
break;
}
}
if (!fReindex && !fReindexChainState) {
uiInterface.InitMessage(_("Verifying blocks..."));
if (fHavePruned &&
gArgs.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS) >
MIN_BLOCKS_TO_KEEP) {
LogPrintf("Prune: pruned datadir may not have more "
"than %d blocks; only checking available "
"blocks",
MIN_BLOCKS_TO_KEEP);
}
CBlockIndex *tip = chainActive.Tip();
RPCNotifyBlockChange(true, tip);
if (tip && tip->nTime >
GetAdjustedTime() + MAX_FUTURE_BLOCK_TIME) {
strLoadError = _(
"The block database contains a block which appears "
"to be from the future. This may be due to your "
"computer's date and time being set incorrectly. "
"Only rebuild the block database if you are sure "
"that your computer's date and time are correct");
break;
}
if (!CVerifyDB().VerifyDB(
config, pcoinsdbview.get(),
gArgs.GetArg("-checklevel", DEFAULT_CHECKLEVEL),
gArgs.GetArg("-checkblocks",
DEFAULT_CHECKBLOCKS))) {
strLoadError = _("Corrupted block database detected");
break;
}
}
} catch (const std::exception &e) {
LogPrintf("%s\n", e.what());
strLoadError = _("Error opening block database");
break;
}
fLoaded = true;
} while (false);
if (!fLoaded && !fRequestShutdown) {
// first suggest a reindex
if (!fReset) {
bool fRet = uiInterface.ThreadSafeQuestion(
strLoadError + ".\n\n" +
_("Do you want to rebuild the block database now?"),
strLoadError + ".\nPlease restart with -reindex or "
"-reindex-chainstate to recover.",
"",
CClientUIInterface::MSG_ERROR |
CClientUIInterface::BTN_ABORT);
if (fRet) {
fReindex = true;
fRequestShutdown = false;
} else {
LogPrintf("Aborted block database rebuild. Exiting.\n");
return false;
}
} else {
return InitError(strLoadError);
}
}
}
// As LoadBlockIndex can take several minutes, it's possible the user
// requested to kill the GUI during the last operation. If so, exit.
// As the program has not fully started yet, Shutdown() is possibly
// overkill.
if (fRequestShutdown) {
LogPrintf("Shutdown requested. Exiting.\n");
return false;
}
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
// Encoded addresses using cashaddr instead of base58
// Activates by default on Jan, 14
config.SetCashAddrEncoding(
gArgs.GetBoolArg("-usecashaddr", GetAdjustedTime() > 1515900000));
// Step 8: load wallet
if (!g_wallet_init_interface->Open(chainparams)) {
return false;
}
// Step 9: data directory maintenance
// if pruning, unset the service bit and perform the initial blockstore
// prune after any wallet rescanning has taken place.
if (fPruneMode) {
LogPrintf("Unsetting NODE_NETWORK on prune mode\n");
nLocalServices = ServiceFlags(nLocalServices & ~NODE_NETWORK);
if (!fReindex) {
uiInterface.InitMessage(_("Pruning blockstore..."));
PruneAndFlush();
}
}
// Step 10: import blocks
if (!CheckDiskSpace()) {
return false;
}
// Either install a handler to notify us when genesis activates, or set
// fHaveGenesis directly.
// No locking, as this happens before any background thread is started.
if (chainActive.Tip() == nullptr) {
uiInterface.NotifyBlockTip.connect(BlockNotifyGenesisWait);
} else {
fHaveGenesis = true;
}
if (gArgs.IsArgSet("-blocknotify")) {
uiInterface.NotifyBlockTip.connect(BlockNotifyCallback);
}
std::vector vImportFiles;
for (const std::string &strFile : gArgs.GetArgs("-loadblock")) {
vImportFiles.push_back(strFile);
}
threadGroup.create_thread(
boost::bind(&ThreadImport, std::ref(config), vImportFiles));
// Wait for genesis block to be processed
{
WAIT_LOCK(cs_GenesisWait, lock);
// We previously could hang here if StartShutdown() is called prior to
// ThreadImport getting started, so instead we just wait on a timer to
// check ShutdownRequested() regularly.
while (!fHaveGenesis && !ShutdownRequested()) {
condvar_GenesisWait.wait_for(lock, std::chrono::milliseconds(500));
}
uiInterface.NotifyBlockTip.disconnect(BlockNotifyGenesisWait);
}
// Step 11: start node
int chain_active_height;
//// debug print
{
LOCK(cs_main);
LogPrintf("mapBlockIndex.size() = %u\n", mapBlockIndex.size());
chain_active_height = chainActive.Height();
}
LogPrintf("nBestHeight = %d\n", chain_active_height);
if (gArgs.GetBoolArg("-listenonion", DEFAULT_LISTEN_ONION)) {
StartTorControl();
}
Discover();
// Map ports with UPnP
if (gArgs.GetBoolArg("-upnp", DEFAULT_UPNP)) {
StartMapPort();
}
CConnman::Options connOptions;
connOptions.nLocalServices = nLocalServices;
connOptions.nMaxConnections = nMaxConnections;
connOptions.nMaxOutbound =
std::min(MAX_OUTBOUND_CONNECTIONS, connOptions.nMaxConnections);
connOptions.nMaxAddnode = MAX_ADDNODE_CONNECTIONS;
connOptions.nMaxFeeler = 1;
connOptions.nBestHeight = chain_active_height;
connOptions.uiInterface = &uiInterface;
connOptions.m_msgproc = peerLogic.get();
connOptions.nSendBufferMaxSize =
1000 * gArgs.GetArg("-maxsendbuffer", DEFAULT_MAXSENDBUFFER);
connOptions.nReceiveFloodSize =
1000 * gArgs.GetArg("-maxreceivebuffer", DEFAULT_MAXRECEIVEBUFFER);
connOptions.m_added_nodes = gArgs.GetArgs("-addnode");
connOptions.nMaxOutboundTimeframe = nMaxOutboundTimeframe;
connOptions.nMaxOutboundLimit = nMaxOutboundLimit;
for (const std::string &strBind : gArgs.GetArgs("-bind")) {
CService addrBind;
if (!Lookup(strBind.c_str(), addrBind, GetListenPort(), false)) {
return InitError(ResolveErrMsg("bind", strBind));
}
connOptions.vBinds.push_back(addrBind);
}
for (const std::string &strBind : gArgs.GetArgs("-whitebind")) {
CService addrBind;
if (!Lookup(strBind.c_str(), addrBind, 0, false)) {
return InitError(ResolveErrMsg("whitebind", strBind));
}
if (addrBind.GetPort() == 0) {
return InitError(strprintf(
_("Need to specify a port with -whitebind: '%s'"), strBind));
}
connOptions.vWhiteBinds.push_back(addrBind);
}
for (const auto &net : gArgs.GetArgs("-whitelist")) {
CSubNet subnet;
LookupSubNet(net.c_str(), subnet);
if (!subnet.IsValid()) {
return InitError(strprintf(
_("Invalid netmask specified in -whitelist: '%s'"), net));
}
connOptions.vWhitelistedRange.push_back(subnet);
}
connOptions.vSeedNodes = gArgs.GetArgs("-seednode");
// Initiate outbound connections unless connect=0
connOptions.m_use_addrman_outgoing = !gArgs.IsArgSet("-connect");
if (!connOptions.m_use_addrman_outgoing) {
const auto connect = gArgs.GetArgs("-connect");
if (connect.size() != 1 || connect[0] != "0") {
connOptions.m_specified_outgoing = connect;
}
}
if (!connman.Start(scheduler, connOptions)) {
return false;
}
// Step 12: finished
SetRPCWarmupFinished();
uiInterface.InitMessage(_("Done loading"));
g_wallet_init_interface->Start(scheduler);
return !fRequestShutdown;
}
diff --git a/src/rpc/protocol.h b/src/rpc/protocol.h
index aa700042f..ec4b67ca4 100644
--- a/src/rpc/protocol.h
+++ b/src/rpc/protocol.h
@@ -1,141 +1,144 @@
// Copyright (c) 2010 Satoshi Nakamoto
// Copyright (c) 2009-2016 The Bitcoin Core developers
// Distributed under the MIT software license, see the accompanying
// file COPYING or http://www.opensource.org/licenses/mit-license.php.
#ifndef BITCOIN_RPCPROTOCOL_H
#define BITCOIN_RPCPROTOCOL_H
#include "fs.h"
#include
#include
#include