diff --git a/src/bitcoind.cpp b/src/bitcoind.cpp index 0ae39bd41..2b37482d7 100644 --- a/src/bitcoind.cpp +++ b/src/bitcoind.cpp @@ -1,221 +1,209 @@ // Copyright (c) 2009-2010 Satoshi Nakamoto // Copyright (c) 2009-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #if defined(HAVE_CONFIG_H) #include "config/bitcoin-config.h" #endif #include "chainparams.h" #include "clientversion.h" #include "compat.h" #include "config.h" #include "fs.h" #include "httprpc.h" #include "httpserver.h" #include "init.h" #include "noui.h" #include "rpc/server.h" -#include "scheduler.h" #include "util.h" #include "utilstrencodings.h" #if ENABLE_WALLET #include "wallet/init.h" #endif #include "walletinitinterface.h" #include #include /* Introduction text for doxygen: */ /*! \mainpage Developer documentation * * \section intro_sec Introduction * * This is the developer documentation of Bitcoin ABC * (https://www.bitcoinabc.org/). Bitcoin ABC is a client for the digital * currency called Bitcoin Cash (https://www.bitcoincash.org/), which enables * instant payments to anyone, anywhere in the world. Bitcoin Cash uses * peer-to-peer technology to operate with no central authority: managing * transactions and issuing money are carried out collectively by the network. * * The software is a community-driven open source project, released under the * MIT license. * * \section Navigation * Use the buttons Namespaces, Classes or * Files at the top of the page to start navigating the code. */ -void WaitForShutdown(boost::thread_group *threadGroup) { +void WaitForShutdown() { while (!ShutdownRequested()) { MilliSleep(200); } - if (threadGroup) { - Interrupt(*threadGroup); - threadGroup->join_all(); - } + Interrupt(); } ////////////////////////////////////////////////////////////////////////////// // // Start // bool AppInit(int argc, char *argv[]) { - boost::thread_group threadGroup; - CScheduler scheduler; - // FIXME: Ideally, we'd like to build the config here, but that's currently // not possible as the whole application has too many global state. However, // this is a first step. auto &config = const_cast(GetConfig()); RPCServer rpcServer; HTTPRPCRequestProcessor httpRPCRequestProcessor(config, rpcServer); bool fRet = false; #if ENABLE_WALLET g_wallet_init_interface.reset(new WalletInit); #else g_wallet_init_interface.reset(new DummyWalletInit); #endif // // Parameters // // If Qt is used, parameters/bitcoin.conf are parsed in qt/bitcoin.cpp's // main() gArgs.ParseParameters(argc, argv); // Process help and version before taking care about datadir if (HelpRequested(gArgs) || gArgs.IsArgSet("-version")) { std::string strUsage = strprintf(_("%s Daemon"), _(PACKAGE_NAME)) + " " + _("version") + " " + FormatFullVersion() + "\n"; if (gArgs.IsArgSet("-version")) { strUsage += FormatParagraph(LicenseInfo()); } else { strUsage += "\n" + _("Usage:") + "\n" + " bitcoind [options] " + strprintf(_("Start %s Daemon"), _(PACKAGE_NAME)) + "\n"; strUsage += "\n" + HelpMessage(HMM_BITCOIND); } fprintf(stdout, "%s", strUsage.c_str()); return true; } try { if (!fs::is_directory(GetDataDir(false))) { fprintf(stderr, "Error: Specified data directory \"%s\" does not exist.\n", gArgs.GetArg("-datadir", "").c_str()); return false; } try { gArgs.ReadConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)); } catch (const std::exception &e) { fprintf(stderr, "Error reading configuration file: %s\n", e.what()); return false; } // Check for -testnet or -regtest parameter (Params() calls are only // valid after this clause) try { SelectParams(gArgs.GetChainName()); } catch (const std::exception &e) { fprintf(stderr, "Error: %s\n", e.what()); return false; } // Error out when loose non-argument tokens are encountered on command // line for (int i = 1; i < argc; i++) { if (!IsSwitchChar(argv[i][0])) { fprintf(stderr, "Error: Command line contains unexpected token " "'%s', see bitcoind -h for a list of " "options.\n", argv[i]); exit(EXIT_FAILURE); } } // -server defaults to true for bitcoind but not for the GUI so do this // here gArgs.SoftSetBoolArg("-server", true); // Set this early so that parameter interactions go to console InitLogging(); InitParameterInteraction(); if (!AppInitBasicSetup()) { // InitError will have been called with detailed error, which ends // up on console exit(1); } if (!AppInitParameterInteraction(config, rpcServer)) { // InitError will have been called with detailed error, which ends // up on console exit(1); } if (!AppInitSanityChecks()) { // InitError will have been called with detailed error, which ends // up on console exit(1); } if (gArgs.GetBoolArg("-daemon", false)) { #if HAVE_DECL_DAEMON fprintf(stdout, "Bitcoin server starting\n"); // Daemonize if (daemon(1, 0)) { // don't chdir (1), do close FDs (0) fprintf(stderr, "Error: daemon() failed: %s\n", strerror(errno)); return false; } #else fprintf( stderr, "Error: -daemon is not supported on this operating system\n"); return false; #endif // HAVE_DECL_DAEMON } // Lock data directory after daemonization if (!AppInitLockDataDirectory()) { // If locking the data directory failed, exit immediately exit(EXIT_FAILURE); } - fRet = AppInitMain(config, httpRPCRequestProcessor, threadGroup, - scheduler); + fRet = AppInitMain(config, httpRPCRequestProcessor); } catch (const std::exception &e) { PrintExceptionContinue(&e, "AppInit()"); } catch (...) { PrintExceptionContinue(nullptr, "AppInit()"); } if (!fRet) { - Interrupt(threadGroup); - // threadGroup.join_all(); was left out intentionally here, because we - // didn't re-test all of the startup-failure cases to make sure they - // don't result in a hang due to some - // thread-blocking-waiting-for-another-thread-during-startup case. + Interrupt(); } else { - WaitForShutdown(&threadGroup); + WaitForShutdown(); } Shutdown(); return fRet; } int main(int argc, char *argv[]) { SetupEnvironment(); // Connect bitcoind signal handlers noui_connect(); return (AppInit(argc, argv) ? EXIT_SUCCESS : EXIT_FAILURE); } diff --git a/src/init.cpp b/src/init.cpp index 2e91e8de3..52d8123d1 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -1,2342 +1,2348 @@ // Copyright (c) 2009-2010 Satoshi Nakamoto // Copyright (c) 2009-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #if defined(HAVE_CONFIG_H) #include "config/bitcoin-config.h" #endif #include "init.h" #include "addrman.h" #include "amount.h" #include "chain.h" #include "chainparams.h" #include "checkpoints.h" #include "compat/sanity.h" #include "config.h" #include "consensus/validation.h" #include "diskblockpos.h" #include "fs.h" #include "httprpc.h" #include "httpserver.h" #include "key.h" #include "miner.h" #include "net.h" #include "net_processing.h" #include "netbase.h" #include "policy/policy.h" #include "rpc/register.h" #include "rpc/safemode.h" #include "rpc/server.h" #include "scheduler.h" #include "script/scriptcache.h" #include "script/sigcache.h" #include "script/standard.h" #include "timedata.h" #include "torcontrol.h" #include "txdb.h" #include "txmempool.h" #include "ui_interface.h" #include "util.h" #include "utilmoneystr.h" #include "validation.h" #include "validationinterface.h" #ifdef ENABLE_WALLET #include "wallet/rpcdump.h" #endif #include "walletinitinterface.h" #include "warnings.h" #include #include #include #ifndef WIN32 #include #endif #include #include #include #include #include #include #if ENABLE_ZMQ #include "zmq/zmqnotificationinterface.h" #endif bool fFeeEstimatesInitialized = false; static const bool DEFAULT_PROXYRANDOMIZE = true; static const bool DEFAULT_REST_ENABLE = false; static const bool DEFAULT_STOPAFTERBLOCKIMPORT = false; std::unique_ptr g_connman; std::unique_ptr peerLogic; std::unique_ptr g_wallet_init_interface; #if ENABLE_ZMQ static CZMQNotificationInterface *pzmqNotificationInterface = nullptr; #endif #ifdef WIN32 // Win32 LevelDB doesn't use filedescriptors, and the ones used for accessing // block files don't count towards the fd_set size limit anyway. #define MIN_CORE_FILEDESCRIPTORS 0 #else #define MIN_CORE_FILEDESCRIPTORS 150 #endif static const char *FEE_ESTIMATES_FILENAME = "fee_estimates.dat"; ////////////////////////////////////////////////////////////////////////////// // // Shutdown // // // Thread management and startup/shutdown: // // The network-processing threads are all part of a thread group created by // AppInit() or the Qt main() function. // // A clean exit happens when StartShutdown() or the SIGTERM signal handler sets // fRequestShutdown, which triggers the DetectShutdownThread(), which interrupts // the main thread group. DetectShutdownThread() then exits, which causes // AppInit() to continue (it .joins the shutdown thread). Shutdown() is then // called to clean up database connections, and stop other threads that should // only be stopped after the main network-processing threads have exited. // // Note that if running -daemon the parent process returns from AppInit2 before // adding any threads to the threadGroup, so .join_all() returns immediately and // the parent exits from main(). // // Shutdown for Qt is very similar, only it uses a QTimer to detect // fRequestShutdown getting set, and then does the normal Qt shutdown thing. // std::atomic fRequestShutdown(false); std::atomic fDumpMempoolLater(false); void StartShutdown() { fRequestShutdown = true; } bool ShutdownRequested() { return fRequestShutdown; } /** * This is a minimally invasive approach to shutdown on LevelDB read errors from * the chainstate, while keeping user interface out of the common library, which * is shared between bitcoind, and bitcoin-qt and non-server tools. */ class CCoinsViewErrorCatcher final : public CCoinsViewBacked { public: explicit CCoinsViewErrorCatcher(CCoinsView *view) : CCoinsViewBacked(view) {} bool GetCoin(const COutPoint &outpoint, Coin &coin) const override { try { return CCoinsViewBacked::GetCoin(outpoint, coin); } catch (const std::runtime_error &e) { uiInterface.ThreadSafeMessageBox( _("Error reading from database, shutting down."), "", CClientUIInterface::MSG_ERROR); LogPrintf("Error reading from database: %s\n", e.what()); // Starting the shutdown sequence and returning false to the caller // would be interpreted as 'entry not found' (as opposed to unable // to read data), and could lead to invalid interpretation. Just // exit immediately, as we can't continue anyway, and all writes // should be atomic. abort(); } } // Writes do not need similar protection, as failure to write is handled by // the caller. }; static std::unique_ptr pcoinscatcher; static std::unique_ptr globalVerifyHandle; -void Interrupt(boost::thread_group &threadGroup) { +static boost::thread_group threadGroup; +static CScheduler scheduler; + +void Interrupt() { InterruptHTTPServer(); InterruptHTTPRPC(); InterruptRPC(); InterruptREST(); InterruptTorControl(); InterruptMapPort(); if (g_connman) { g_connman->Interrupt(); } - threadGroup.interrupt_all(); } void Shutdown() { LogPrintf("%s: In progress...\n", __func__); static CCriticalSection cs_Shutdown; TRY_LOCK(cs_Shutdown, lockShutdown); if (!lockShutdown) { return; } /// Note: Shutdown() must be able to handle cases in which AppInit2() failed /// part of the way, for example if the data directory was found to be /// locked. Be sure that anything that writes files or flushes caches only /// does this if the respective module was initialized. RenameThread("bitcoin-shutoff"); g_mempool.AddTransactionsUpdated(1); StopHTTPRPC(); StopREST(); StopRPC(); StopHTTPServer(); g_wallet_init_interface->Flush(); StopMapPort(); // Because these depend on each-other, we make sure that neither can be // using the other before destroying them. UnregisterValidationInterface(peerLogic.get()); g_connman->Stop(); peerLogic.reset(); g_connman.reset(); StopTorControl(); + + // After everything has been shut down, but before things get flushed, stop + // the CScheduler/checkqueue threadGroup + threadGroup.interrupt_all(); + threadGroup.join_all(); + if (fDumpMempoolLater && gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { DumpMempool(); } if (fFeeEstimatesInitialized) { fs::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME; CAutoFile est_fileout(fsbridge::fopen(est_path, "wb"), SER_DISK, CLIENT_VERSION); if (!est_fileout.IsNull()) { g_mempool.WriteFeeEstimates(est_fileout); } else { LogPrintf("%s: Failed to write fee estimates to %s\n", __func__, est_path.string()); } fFeeEstimatesInitialized = false; } // FlushStateToDisk generates a SetBestChain callback, which we should avoid // missing if (pcoinsTip != nullptr) { FlushStateToDisk(); } // After there are no more peers/RPC left to give us new data which may // generate CValidationInterface callbacks, flush them... GetMainSignals().FlushBackgroundCallbacks(); // Any future callbacks will be dropped. This should absolutely be safe - if // missing a callback results in an unrecoverable situation, unclean // shutdown would too. The only reason to do the above flushes is to let the // wallet catch up with our current chain to avoid any strange pruning edge // cases and make next startup faster by avoiding rescan. { LOCK(cs_main); if (pcoinsTip != nullptr) { FlushStateToDisk(); } pcoinsTip.reset(); pcoinscatcher.reset(); pcoinsdbview.reset(); pblocktree.reset(); } g_wallet_init_interface->Stop(); #if ENABLE_ZMQ if (pzmqNotificationInterface) { UnregisterValidationInterface(pzmqNotificationInterface); delete pzmqNotificationInterface; pzmqNotificationInterface = nullptr; } #endif #ifndef WIN32 try { fs::remove(GetPidFile()); } catch (const fs::filesystem_error &e) { LogPrintf("%s: Unable to remove pidfile: %s\n", __func__, e.what()); } #endif UnregisterAllValidationInterfaces(); GetMainSignals().UnregisterBackgroundSignalScheduler(); GetMainSignals().UnregisterWithMempoolSignals(g_mempool); g_wallet_init_interface->Close(); g_wallet_init_interface.reset(); globalVerifyHandle.reset(); ECC_Stop(); LogPrintf("%s: done\n", __func__); } /** * Signal handlers are very limited in what they are allowed to do, so: */ void HandleSIGTERM(int) { fRequestShutdown = true; } void HandleSIGHUP(int) { GetLogger().m_reopen_file = true; } void OnRPCStarted() { uiInterface.NotifyBlockTip.connect(&RPCNotifyBlockChange); } void OnRPCStopped() { uiInterface.NotifyBlockTip.disconnect(&RPCNotifyBlockChange); RPCNotifyBlockChange(false, nullptr); g_best_block_cv.notify_all(); LogPrint(BCLog::RPC, "RPC stopped.\n"); } std::string HelpMessage(HelpMessageMode mode) { const auto defaultBaseParams = CreateBaseChainParams(CBaseChainParams::MAIN); const auto testnetBaseParams = CreateBaseChainParams(CBaseChainParams::TESTNET); const auto defaultChainParams = CreateChainParams(CBaseChainParams::MAIN); const auto testnetChainParams = CreateChainParams(CBaseChainParams::TESTNET); const bool showDebug = gArgs.GetBoolArg("-help-debug", false); // When adding new options to the categories, please keep and ensure // alphabetical ordering. Do not translate _(...) -help-debug options, Many // technical terms, and only a very small audience, so is unnecessary stress // to translators. std::string strUsage = HelpMessageGroup(_("Options:")); strUsage += HelpMessageOpt("-?", _("Print this help message and exit")); strUsage += HelpMessageOpt("-version", _("Print version and exit")); strUsage += HelpMessageOpt( "-alertnotify=", _("Execute command when a relevant alert is received or we see a " "really long fork (%s in cmd is replaced by message)")); strUsage += HelpMessageOpt("-blocknotify=", _("Execute command when the best block changes " "(%s in cmd is replaced by block hash)")); if (showDebug) { strUsage += HelpMessageOpt( "-blocksonly", strprintf( _("Whether to operate in a blocks only mode (default: %d)"), DEFAULT_BLOCKSONLY)); } strUsage += HelpMessageOpt( "-assumevalid=", strprintf( _("If this block is in the chain assume that it and its ancestors " "are valid and potentially skip their script verification (0 to " "verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex())); strUsage += HelpMessageOpt( "-conf=", strprintf(_("Specify configuration file (default: %s)"), BITCOIN_CONF_FILENAME)); if (mode == HMM_BITCOIND) { #if HAVE_DECL_DAEMON strUsage += HelpMessageOpt( "-daemon", _("Run in the background as a daemon and accept commands")); #endif } strUsage += HelpMessageOpt("-datadir=", _("Specify data directory")); if (showDebug) { strUsage += HelpMessageOpt( "-dbbatchsize", strprintf( "Maximum database write batch size in bytes (default: %u)", nDefaultDbBatchSize)); } strUsage += HelpMessageOpt( "-dbcache=", strprintf( _("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache)); if (showDebug) { strUsage += HelpMessageOpt( "-feefilter", strprintf("Tell other nodes to filter invs to us by " "our mempool min fee (default: %d)", DEFAULT_FEEFILTER)); } strUsage += HelpMessageOpt( "-loadblock=", _("Imports blocks from external blk000??.dat file on startup")); strUsage += HelpMessageOpt( "-maxorphantx=", strprintf(_("Keep at most unconnectable " "transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS)); strUsage += HelpMessageOpt("-maxmempool=", strprintf(_("Keep the transaction memory pool " "below megabytes (default: %u)"), DEFAULT_MAX_MEMPOOL_SIZE)); strUsage += HelpMessageOpt("-mempoolexpiry=", strprintf(_("Do not keep transactions in the mempool " "longer than hours (default: %u)"), DEFAULT_MEMPOOL_EXPIRY)); if (showDebug) { strUsage += HelpMessageOpt( "-minimumchainwork=", strprintf( "Minimum work assumed to exist on a valid chain in hex " "(default: %s, testnet: %s)", defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnetChainParams->GetConsensus().nMinimumChainWork.GetHex())); } strUsage += HelpMessageOpt("-persistmempool", strprintf(_("Whether to save the mempool on shutdown " "and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL)); strUsage += HelpMessageOpt( "-blockreconstructionextratxn=", strprintf(_("Extra transactions to keep in memory for compact block " "reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN)); strUsage += HelpMessageOpt( "-par=", strprintf(_("Set the number of script verification threads (%u to %d, " "0 = auto, <0 = leave that many cores free, default: %d)"), -GetNumCores(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS)); #ifndef WIN32 strUsage += HelpMessageOpt( "-pid=", strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME)); #endif strUsage += HelpMessageOpt( "-prune=", strprintf( _("Reduce storage requirements by enabling pruning (deleting) of " "old blocks. This allows the pruneblockchain RPC to be called to " "delete specific blocks, and enables automatic pruning of old " "blocks if a target size in MiB is provided. This mode is " "incompatible with -txindex and -rescan. " "Warning: Reverting this setting requires re-downloading the " "entire blockchain. " "(default: 0 = disable pruning blocks, 1 = allow manual pruning " "via RPC, >%u = automatically prune block files to stay under " "the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); strUsage += HelpMessageOpt( "-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks")); strUsage += HelpMessageOpt("-reindex", _("Rebuild chain state and block index from " "the blk*.dat files on disk")); #ifndef WIN32 strUsage += HelpMessageOpt( "-sysperms", _("Create new files with system default permissions, instead of umask " "077 (only effective with disabled wallet functionality)")); #endif strUsage += HelpMessageOpt( "-txindex", strprintf(_("Maintain a full transaction index, used by " "the getrawtransaction rpc call (default: %d)"), DEFAULT_TXINDEX)); strUsage += HelpMessageOpt( "-usecashaddr", _("Use Cash Address for destination encoding instead " "of base58 (activate by default on Jan, 14)")); strUsage += HelpMessageGroup(_("Connection options:")); strUsage += HelpMessageOpt( "-addnode=", _("Add a node to connect to and attempt to keep the connection open " "(see the `addnode` RPC command help for more info)")); strUsage += HelpMessageOpt( "-banscore=", strprintf( _("Threshold for disconnecting misbehaving peers (default: %u)"), DEFAULT_BANSCORE_THRESHOLD)); strUsage += HelpMessageOpt( "-bantime=", strprintf(_("Number of seconds to keep misbehaving " "peers from reconnecting (default: %u)"), DEFAULT_MISBEHAVING_BANTIME)); strUsage += HelpMessageOpt("-bind=", _("Bind to given address and always listen on " "it. Use [host]:port notation for IPv6")); strUsage += HelpMessageOpt( "-connect=", _("Connect only to the specified node(s); -connect=0 " "disables automatic connections (the rules for this " "peer are the same as for -addnode)")); strUsage += HelpMessageOpt("-discover", _("Discover own IP addresses (default: 1 when " "listening and no -externalip or -proxy)")); strUsage += HelpMessageOpt( "-dns", _("Allow DNS lookups for -addnode, -seednode and -connect") + " " + strprintf(_("(default: %d)"), DEFAULT_NAME_LOOKUP)); strUsage += HelpMessageOpt( "-dnsseed", _("Query for peer addresses via DNS lookup, if low on " "addresses (default: 1 unless -connect/-noconnect)")); strUsage += HelpMessageOpt("-externalip=", _("Specify your own public address")); strUsage += HelpMessageOpt( "-forcednsseed", strprintf( _("Always query for peer addresses via DNS lookup (default: %d)"), DEFAULT_FORCEDNSSEED)); strUsage += HelpMessageOpt("-listen", _("Accept connections from outside (default: " "1 if no -proxy or -connect/-noconnect)")); strUsage += HelpMessageOpt( "-listenonion", strprintf(_("Automatically create Tor hidden service (default: %d)"), DEFAULT_LISTEN_ONION)); strUsage += HelpMessageOpt( "-maxconnections=", strprintf(_("Maintain at most connections to peers (default: %u)"), DEFAULT_MAX_PEER_CONNECTIONS)); strUsage += HelpMessageOpt("-maxreceivebuffer=", strprintf(_("Maximum per-connection receive buffer, " "*1000 bytes (default: %u)"), DEFAULT_MAXRECEIVEBUFFER)); strUsage += HelpMessageOpt( "-maxsendbuffer=", strprintf(_("Maximum per-connection send buffer, " "*1000 bytes (default: %u)"), DEFAULT_MAXSENDBUFFER)); strUsage += HelpMessageOpt( "-maxtimeadjustment", strprintf(_("Maximum allowed median peer time offset adjustment. Local " "perspective of time may be influenced by peers forward or " "backward by this amount. (default: %u seconds)"), DEFAULT_MAX_TIME_ADJUSTMENT)); strUsage += HelpMessageOpt("-onion=", strprintf(_("Use separate SOCKS5 proxy to reach peers " "via Tor hidden services (default: %s)"), "-proxy")); strUsage += HelpMessageOpt( "-onlynet=", _("Only connect to nodes in network (ipv4, ipv6 or onion)")); strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %d)"), DEFAULT_PERMIT_BAREMULTISIG)); strUsage += HelpMessageOpt( "-peerbloomfilters", strprintf(_("Support filtering of blocks and transaction with bloom " "filters (default: %d)"), DEFAULT_PEERBLOOMFILTERS)); strUsage += HelpMessageOpt( "-port=", strprintf( _("Listen for connections on (default: %u or testnet: %u)"), defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort())); strUsage += HelpMessageOpt("-proxy=", _("Connect through SOCKS5 proxy")); strUsage += HelpMessageOpt( "-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This " "enables Tor stream isolation (default: %d)"), DEFAULT_PROXYRANDOMIZE)); strUsage += HelpMessageOpt( "-seednode=", _("Connect to a node to retrieve peer addresses, and disconnect")); strUsage += HelpMessageOpt( "-timeout=", strprintf(_("Specify connection timeout in " "milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT)); strUsage += HelpMessageOpt("-torcontrol=:", strprintf(_("Tor control port to use if onion " "listening enabled (default: %s)"), DEFAULT_TOR_CONTROL)); strUsage += HelpMessageOpt("-torpassword=", _("Tor control port password (default: empty)")); #ifdef USE_UPNP #if USE_UPNP strUsage += HelpMessageOpt("-upnp", _("Use UPnP to map the listening port " "(default: 1 when listening and no -proxy)")); #else strUsage += HelpMessageOpt( "-upnp", strprintf(_("Use UPnP to map the listening port (default: %u)"), 0)); #endif #endif strUsage += HelpMessageOpt("-whitebind=", _("Bind to given address and whitelist peers connecting " "to it. Use [host]:port notation for IPv6")); strUsage += HelpMessageOpt( "-whitelist=", _("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) " "or CIDR notated network (e.g. 1.2.3.0/24). Can be specified " "multiple times.") + " " + _("Whitelisted peers cannot be DoS banned and their " "transactions are always relayed, even if they are already " "in the mempool, useful e.g. for a gateway")); strUsage += HelpMessageOpt( "-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted " "peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY)); strUsage += HelpMessageOpt( "-whitelistforcerelay", strprintf(_("Force relay of transactions from whitelisted peers even " "if they violate local relay policy (default: %d)"), DEFAULT_WHITELISTFORCERELAY)); strUsage += HelpMessageOpt( "-maxuploadtarget=", strprintf(_("Tries to keep outbound traffic under the given target (in " "MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET)); strUsage += g_wallet_init_interface->GetHelpString(showDebug); #if ENABLE_ZMQ strUsage += HelpMessageGroup(_("ZeroMQ notification options:")); strUsage += HelpMessageOpt("-zmqpubhashblock=
", _("Enable publish hash block in
")); strUsage += HelpMessageOpt("-zmqpubhashtx=
", _("Enable publish hash transaction in
")); strUsage += HelpMessageOpt("-zmqpubrawblock=
", _("Enable publish raw block in
")); strUsage += HelpMessageOpt("-zmqpubrawtx=
", _("Enable publish raw transaction in
")); #endif strUsage += HelpMessageGroup(_("Debugging/Testing options:")); strUsage += HelpMessageOpt("-uacomment=", _("Append comment to the user agent string")); if (showDebug) { strUsage += HelpMessageOpt( "-checkblocks=", strprintf( _("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS)); strUsage += HelpMessageOpt("-checklevel=", strprintf(_("How thorough the block verification of " "-checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL)); strUsage += HelpMessageOpt( "-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, " "setBlockIndexCandidates, chainActive and " "mapBlocksUnlinked occasionally. Also sets -checkmempool " "(default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt( "-checkmempool=", strprintf("Run checks every transactions (default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt( "-checkpoints", strprintf("Only accept block chain matching " "built-in checkpoints (default: %d)", DEFAULT_CHECKPOINTS_ENABLED)); strUsage += HelpMessageOpt( "-disablesafemode", strprintf("Disable safemode, override a real " "safe mode event (default: %d)", DEFAULT_DISABLE_SAFEMODE)); strUsage += HelpMessageOpt("-deprecatedrpc=", "Allows deprecated RPC method(s) to be used"); strUsage += HelpMessageOpt( "-testsafemode", strprintf("Force safe mode (default: %d)", DEFAULT_TESTSAFEMODE)); strUsage += HelpMessageOpt("-dropmessagestest=", "Randomly drop 1 of every network messages"); strUsage += HelpMessageOpt("-fuzzmessagestest=", "Randomly fuzz 1 of every network messages"); strUsage += HelpMessageOpt( "-stopafterblockimport", strprintf( "Stop running after importing blocks from disk (default: %d)", DEFAULT_STOPAFTERBLOCKIMPORT)); strUsage += HelpMessageOpt( "-stopatheight", strprintf("Stop running after reaching the given " "height in the main chain (default: %u)", DEFAULT_STOPATHEIGHT)); strUsage += HelpMessageOpt( "-limitancestorcount=", strprintf("Do not accept transactions if number of in-mempool " "ancestors is or more (default: %u)", DEFAULT_ANCESTOR_LIMIT)); strUsage += HelpMessageOpt("-limitancestorsize=", strprintf("Do not accept transactions whose size " "with all in-mempool ancestors exceeds " " kilobytes (default: %u)", DEFAULT_ANCESTOR_SIZE_LIMIT)); strUsage += HelpMessageOpt( "-limitdescendantcount=", strprintf("Do not accept transactions if any ancestor would have " " or more in-mempool descendants (default: %u)", DEFAULT_DESCENDANT_LIMIT)); strUsage += HelpMessageOpt( "-limitdescendantsize=", strprintf("Do not accept transactions if any ancestor would have " "more than kilobytes of in-mempool descendants " "(default: %u).", DEFAULT_DESCENDANT_SIZE_LIMIT)); } strUsage += HelpMessageOpt( "-debug=", strprintf(_("Output debugging information (default: %u, supplying " " is optional)"), 0) + ". " + _("If is not supplied or if = 1, " "output all debugging information.") + _(" can be:") + " " + ListLogCategories() + "."); strUsage += HelpMessageOpt( "-debugexclude=", strprintf(_("Exclude debugging information for a category. Can be used " "in conjunction with -debug=1 to output debug logs for all " "categories except one or more specified categories."))); if (showDebug) { strUsage += HelpMessageOpt( "-nodebug", "Turn off debugging messages, same as -debug=0"); } strUsage += HelpMessageOpt( "-help-debug", _("Show all debugging options (usage: --help -help-debug)")); strUsage += HelpMessageOpt( "-logips", strprintf(_("Include IP addresses in debug output (default: %d)"), DEFAULT_LOGIPS)); strUsage += HelpMessageOpt( "-logtimestamps", strprintf(_("Prepend debug output with timestamp (default: %d)"), DEFAULT_LOGTIMESTAMPS)); if (showDebug) { strUsage += HelpMessageOpt( "-logtimemicros", strprintf( "Add microsecond precision to debug timestamps (default: %d)", DEFAULT_LOGTIMEMICROS)); strUsage += HelpMessageOpt( "-mocktime=", "Replace actual time with seconds since epoch (default: 0)"); strUsage += HelpMessageOpt( "-limitfreerelay=", strprintf("Continuously rate-limit free transactions to *1000 " "bytes per minute (default: %u)", DEFAULT_LIMITFREERELAY)); strUsage += HelpMessageOpt("-relaypriority", strprintf("Require high priority for relaying free " "or low-fee transactions (default: %d)", DEFAULT_RELAYPRIORITY)); strUsage += HelpMessageOpt( "-maxsigcachesize=", strprintf("Limit size of signature cache to MiB (default: %u)", DEFAULT_MAX_SIG_CACHE_SIZE)); strUsage += HelpMessageOpt( "-maxscriptcachesize=", strprintf("Limit size of script cache to MiB (default: %u)", DEFAULT_MAX_SCRIPT_CACHE_SIZE)); strUsage += HelpMessageOpt( "-maxtipage=", strprintf("Maximum tip age in seconds to consider node in initial " "block download (default: %u)", DEFAULT_MAX_TIP_AGE)); } strUsage += HelpMessageOpt( "-excessutxocharge=", strprintf(_("Fees (in %s/kB) to charge per utxo created for" "relaying, and mining (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_UTXO_FEE))); strUsage += HelpMessageOpt( "-minrelaytxfee=", strprintf( _("Fees (in %s/kB) smaller than this are considered zero fee for " "relaying, mining and transaction creation (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE_PER_KB))); strUsage += HelpMessageOpt( "-maxtxfee=", strprintf(_("Maximum total fees (in %s) to use in a single wallet " "transaction or raw transaction; setting this too low may " "abort large transactions (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE))); strUsage += HelpMessageOpt( "-printtoconsole", _("Send trace/debug info to console instead of debug.log file")); if (showDebug) { strUsage += HelpMessageOpt( "-printpriority", strprintf("Log transaction priority and fee per " "kB when mining blocks (default: %d)", DEFAULT_PRINTPRIORITY)); } strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup " "(default: 1 when no -debug)")); AppendParamsHelpMessages(strUsage, showDebug); strUsage += HelpMessageGroup(_("Node relay options:")); if (showDebug) { strUsage += HelpMessageOpt( "-acceptnonstdtxn", strprintf( "Relay and mine \"non-standard\" transactions (%sdefault: %u)", "testnet/regtest only; ", defaultChainParams->RequireStandard())); strUsage += HelpMessageOpt("-excessiveblocksize=", strprintf(_("Do not accept blocks larger than this " "limit, in bytes (default: %d)"), DEFAULT_MAX_BLOCK_SIZE)); strUsage += HelpMessageOpt( "-dustrelayfee=", strprintf("Fee rate (in %s/kB) used to defined dust, the value of " "an output such that it will cost about 1/3 of its value " "in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE))); } strUsage += HelpMessageOpt("-bytespersigop", strprintf(_("Equivalent bytes per sigop in transactions " "for relay and mining (default: %u)"), DEFAULT_BYTES_PER_SIGOP)); strUsage += HelpMessageOpt( "-datacarrier", strprintf(_("Relay and mine data carrier transactions (default: %d)"), DEFAULT_ACCEPT_DATACARRIER)); strUsage += HelpMessageOpt( "-datacarriersize", strprintf(_("Maximum size of data in data carrier transactions we " "relay and mine (default: %u)"), MAX_OP_RETURN_RELAY)); strUsage += HelpMessageGroup(_("Block creation options:")); strUsage += HelpMessageOpt( "-blockmaxsize=", strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_MAX_GENERATED_BLOCK_SIZE)); strUsage += HelpMessageOpt( "-blockprioritypercentage=", strprintf(_("Set maximum percentage of a block reserved to " "high-priority/low-fee transactions (default: %d)"), DEFAULT_BLOCK_PRIORITY_PERCENTAGE)); strUsage += HelpMessageOpt( "-blockmintxfee=", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be " "included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE_PER_KB))); if (showDebug) { strUsage += HelpMessageOpt("-blockversion=", "Override block version to test forking scenarios"); } strUsage += HelpMessageGroup(_("RPC server options:")); strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands")); strUsage += HelpMessageOpt( "-rest", strprintf(_("Accept public REST requests (default: %d)"), DEFAULT_REST_ENABLE)); strUsage += HelpMessageOpt( "-rpcbind=", _("Bind to given address to listen for JSON-RPC connections. Use " "[host]:port notation for IPv6. This option can be specified " "multiple times (default: bind to all interfaces)")); strUsage += HelpMessageOpt("-rpccookiefile=", _("Location of the auth cookie (default: data dir)")); strUsage += HelpMessageOpt("-rpcuser=", _("Username for JSON-RPC connections")); strUsage += HelpMessageOpt("-rpcpassword=", _("Password for JSON-RPC connections")); strUsage += HelpMessageOpt( "-rpcauth=", _("Username and hashed password for JSON-RPC connections. The field " " comes in the format: :$. A canonical " "python script is included in share/rpcuser. The client then " "connects normally using the " "rpcuser=/rpcpassword= pair of arguments. This " "option can be specified multiple times")); strUsage += HelpMessageOpt( "-rpcport=", strprintf(_("Listen for JSON-RPC connections on (default: %u or " "testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort())); strUsage += HelpMessageOpt( "-rpcallowip=", _("Allow JSON-RPC connections from specified source. Valid for " "are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. " "1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This " "option can be specified multiple times")); strUsage += HelpMessageOpt( "-rpcthreads=", strprintf( _("Set the number of threads to service RPC calls (default: %d)"), DEFAULT_HTTP_THREADS)); strUsage += HelpMessageOpt( "-rpccorsdomain=value", "Domain from which to accept cross origin requests (browser enforced)"); if (showDebug) { strUsage += HelpMessageOpt( "-rpcworkqueue=", strprintf("Set the depth of the work queue to " "service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE)); strUsage += HelpMessageOpt( "-rpcservertimeout=", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT)); } return strUsage; } std::string LicenseInfo() { const std::string URL_SOURCE_CODE = ""; const std::string URL_WEBSITE = ""; return CopyrightHolders( strprintf(_("Copyright (C) %i-%i"), 2009, COPYRIGHT_YEAR) + " ") + "\n" + "\n" + strprintf(_("Please contribute if you find %s useful. " "Visit %s for further information about the software."), PACKAGE_NAME, URL_WEBSITE) + "\n" + strprintf(_("The source code is available from %s."), URL_SOURCE_CODE) + "\n" + "\n" + _("This is experimental software.") + "\n" + strprintf(_("Distributed under the MIT software license, see the " "accompanying file %s or %s"), "COPYING", "") + "\n" + "\n" + strprintf(_("This product includes software developed by the " "OpenSSL Project for use in the OpenSSL Toolkit %s and " "cryptographic software written by Eric Young and UPnP " "software written by Thomas Bernard."), "") + "\n"; } static void BlockNotifyCallback(bool initialSync, const CBlockIndex *pBlockIndex) { if (initialSync || !pBlockIndex) { return; } std::string strCmd = gArgs.GetArg("-blocknotify", ""); if (!strCmd.empty()) { boost::replace_all(strCmd, "%s", pBlockIndex->GetBlockHash().GetHex()); std::thread t(runCommand, strCmd); // thread runs free t.detach(); } } static bool fHaveGenesis = false; static CWaitableCriticalSection cs_GenesisWait; static CConditionVariable condvar_GenesisWait; static void BlockNotifyGenesisWait(bool, const CBlockIndex *pBlockIndex) { if (pBlockIndex != nullptr) { { LOCK(cs_GenesisWait); fHaveGenesis = true; } condvar_GenesisWait.notify_all(); } } struct CImportingNow { CImportingNow() { assert(fImporting == false); fImporting = true; } ~CImportingNow() { assert(fImporting == true); fImporting = false; } }; // If we're using -prune with -reindex, then delete block files that will be // ignored by the reindex. Since reindexing works by starting at block file 0 // and looping until a blockfile is missing, do the same here to delete any // later block files after a gap. Also delete all rev files since they'll be // rewritten by the reindex anyway. This ensures that vinfoBlockFile is in sync // with what's actually on disk by the time we start downloading, so that // pruning works correctly. void CleanupBlockRevFiles() { std::map mapBlockFiles; // Glob all blk?????.dat and rev?????.dat files from the blocks directory. // Remove the rev files immediately and insert the blk file paths into an // ordered map keyed by block file index. LogPrintf("Removing unusable blk?????.dat and rev?????.dat files for " "-reindex with -prune\n"); fs::path blocksdir = GetDataDir() / "blocks"; for (fs::directory_iterator it(blocksdir); it != fs::directory_iterator(); it++) { if (is_regular_file(*it) && it->path().filename().string().length() == 12 && it->path().filename().string().substr(8, 4) == ".dat") { if (it->path().filename().string().substr(0, 3) == "blk") { mapBlockFiles[it->path().filename().string().substr(3, 5)] = it->path(); } else if (it->path().filename().string().substr(0, 3) == "rev") { remove(it->path()); } } } // Remove all block files that aren't part of a contiguous set starting at // zero by walking the ordered map (keys are block file indices) by keeping // a separate counter. Once we hit a gap (or if 0 doesn't exist) start // removing block files. int nContigCounter = 0; for (const std::pair &item : mapBlockFiles) { if (atoi(item.first) == nContigCounter) { nContigCounter++; continue; } remove(item.second); } } void ThreadImport(const Config &config, std::vector vImportFiles) { RenameThread("bitcoin-loadblk"); { CImportingNow imp; // -reindex if (fReindex) { int nFile = 0; while (true) { CDiskBlockPos pos(nFile, 0); if (!fs::exists(GetBlockPosFilename(pos, "blk"))) { // No block files left to reindex break; } FILE *file = OpenBlockFile(pos, true); if (!file) { // This error is logged in OpenBlockFile break; } LogPrintf("Reindexing block file blk%05u.dat...\n", (unsigned int)nFile); LoadExternalBlockFile(config, file, &pos); nFile++; } pblocktree->WriteReindexing(false); fReindex = false; LogPrintf("Reindexing finished\n"); // To avoid ending up in a situation without genesis block, re-try // initializing (no-op if reindexing worked): LoadGenesisBlock(config.GetChainParams()); } // hardcoded $DATADIR/bootstrap.dat fs::path pathBootstrap = GetDataDir() / "bootstrap.dat"; if (fs::exists(pathBootstrap)) { FILE *file = fsbridge::fopen(pathBootstrap, "rb"); if (file) { fs::path pathBootstrapOld = GetDataDir() / "bootstrap.dat.old"; LogPrintf("Importing bootstrap.dat...\n"); LoadExternalBlockFile(config, file); RenameOver(pathBootstrap, pathBootstrapOld); } else { LogPrintf("Warning: Could not open bootstrap file %s\n", pathBootstrap.string()); } } // -loadblock= for (const fs::path &path : vImportFiles) { FILE *file = fsbridge::fopen(path, "rb"); if (file) { LogPrintf("Importing blocks file %s...\n", path.string()); LoadExternalBlockFile(config, file); } else { LogPrintf("Warning: Could not open blocks file %s\n", path.string()); } } // scan for better chains in the block chain database, that are not yet // connected in the active best chain CValidationState state; if (!ActivateBestChain(config, state)) { LogPrintf("Failed to connect best block"); StartShutdown(); } if (gArgs.GetBoolArg("-stopafterblockimport", DEFAULT_STOPAFTERBLOCKIMPORT)) { LogPrintf("Stopping after block import\n"); StartShutdown(); } } // End scope of CImportingNow if (gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { LoadMempool(config); fDumpMempoolLater = !fRequestShutdown; } } /** Sanity checks * Ensure that Bitcoin is running in a usable environment with all * necessary library support. */ bool InitSanityCheck(void) { if (!ECC_InitSanityCheck()) { InitError( "Elliptic curve cryptography sanity check failure. Aborting."); return false; } if (!glibc_sanity_test() || !glibcxx_sanity_test()) { return false; } if (!Random_SanityCheck()) { InitError("OS cryptographic RNG sanity check failure. Aborting."); return false; } return true; } static bool AppInitServers(Config &config, - HTTPRPCRequestProcessor &httpRPCRequestProcessor, - boost::thread_group &threadGroup) { + HTTPRPCRequestProcessor &httpRPCRequestProcessor) { RPCServerSignals::OnStarted(&OnRPCStarted); RPCServerSignals::OnStopped(&OnRPCStopped); if (!InitHTTPServer(config)) { return false; } if (!StartRPC()) { return false; } if (!StartHTTPRPC(config, httpRPCRequestProcessor)) { return false; } if (gArgs.GetBoolArg("-rest", DEFAULT_REST_ENABLE) && !StartREST()) { return false; } if (!StartHTTPServer()) { return false; } return true; } // Parameter interaction based on rules void InitParameterInteraction() { // when specifying an explicit binding address, you want to listen on it // even when -connect or -proxy is specified. if (gArgs.IsArgSet("-bind")) { if (gArgs.SoftSetBoolArg("-listen", true)) { LogPrintf( "%s: parameter interaction: -bind set -> setting -listen=1\n", __func__); } } if (gArgs.IsArgSet("-whitebind")) { if (gArgs.SoftSetBoolArg("-listen", true)) { LogPrintf("%s: parameter interaction: -whitebind set -> setting " "-listen=1\n", __func__); } } if (gArgs.IsArgSet("-connect")) { // when only connecting to trusted nodes, do not seed via DNS, or listen // by default. if (gArgs.SoftSetBoolArg("-dnsseed", false)) { LogPrintf("%s: parameter interaction: -connect set -> setting " "-dnsseed=0\n", __func__); } if (gArgs.SoftSetBoolArg("-listen", false)) { LogPrintf("%s: parameter interaction: -connect set -> setting " "-listen=0\n", __func__); } } if (gArgs.IsArgSet("-proxy")) { // to protect privacy, do not listen by default if a default proxy // server is specified. if (gArgs.SoftSetBoolArg("-listen", false)) { LogPrintf( "%s: parameter interaction: -proxy set -> setting -listen=0\n", __func__); } // to protect privacy, do not use UPNP when a proxy is set. The user may // still specify -listen=1 to listen locally, so don't rely on this // happening through -listen below. if (gArgs.SoftSetBoolArg("-upnp", false)) { LogPrintf( "%s: parameter interaction: -proxy set -> setting -upnp=0\n", __func__); } // to protect privacy, do not discover addresses by default if (gArgs.SoftSetBoolArg("-discover", false)) { LogPrintf("%s: parameter interaction: -proxy set -> setting " "-discover=0\n", __func__); } } if (!gArgs.GetBoolArg("-listen", DEFAULT_LISTEN)) { // do not map ports or try to retrieve public IP when not listening // (pointless) if (gArgs.SoftSetBoolArg("-upnp", false)) { LogPrintf( "%s: parameter interaction: -listen=0 -> setting -upnp=0\n", __func__); } if (gArgs.SoftSetBoolArg("-discover", false)) { LogPrintf( "%s: parameter interaction: -listen=0 -> setting -discover=0\n", __func__); } if (gArgs.SoftSetBoolArg("-listenonion", false)) { LogPrintf("%s: parameter interaction: -listen=0 -> setting " "-listenonion=0\n", __func__); } } if (gArgs.IsArgSet("-externalip")) { // if an explicit public IP is specified, do not try to find others if (gArgs.SoftSetBoolArg("-discover", false)) { LogPrintf("%s: parameter interaction: -externalip set -> setting " "-discover=0\n", __func__); } } // disable whitelistrelay in blocksonly mode if (gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY)) { if (gArgs.SoftSetBoolArg("-whitelistrelay", false)) { LogPrintf("%s: parameter interaction: -blocksonly=1 -> setting " "-whitelistrelay=0\n", __func__); } } // Forcing relay from whitelisted hosts implies we will accept relays from // them in the first place. if (gArgs.GetBoolArg("-whitelistforcerelay", DEFAULT_WHITELISTFORCERELAY)) { if (gArgs.SoftSetBoolArg("-whitelistrelay", true)) { LogPrintf("%s: parameter interaction: -whitelistforcerelay=1 -> " "setting -whitelistrelay=1\n", __func__); } } } static std::string ResolveErrMsg(const char *const optname, const std::string &strBind) { return strprintf(_("Cannot resolve -%s address: '%s'"), optname, strBind); } void InitLogging() { BCLog::Logger &logger = GetLogger(); logger.m_print_to_console = gArgs.GetBoolArg("-printtoconsole", false); logger.m_log_timestamps = gArgs.GetBoolArg("-logtimestamps", DEFAULT_LOGTIMESTAMPS); logger.m_log_time_micros = gArgs.GetBoolArg("-logtimemicros", DEFAULT_LOGTIMEMICROS); fLogIPs = gArgs.GetBoolArg("-logips", DEFAULT_LOGIPS); LogPrintf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"); LogPrintf("%s version %s\n", CLIENT_NAME, FormatFullVersion()); } namespace { // Variables internal to initialization process only int nMaxConnections; int nUserMaxConnections; int nFD; ServiceFlags nLocalServices = NODE_NETWORK; } // namespace [[noreturn]] static void new_handler_terminate() { // Rather than throwing std::bad-alloc if allocation fails, terminate // immediately to (try to) avoid chain corruption. Since LogPrintf may // itself allocate memory, set the handler directly to terminate first. std::set_new_handler(std::terminate); LogPrintf("Error: Out of memory. Terminating.\n"); // The log was successful, terminate now. std::terminate(); }; bool AppInitBasicSetup() { // Step 1: setup #ifdef _MSC_VER // Turn off Microsoft heap dump noise _CrtSetReportMode(_CRT_WARN, _CRTDBG_MODE_FILE); _CrtSetReportFile(_CRT_WARN, CreateFileA("NUL", GENERIC_WRITE, 0, nullptr, OPEN_EXISTING, 0, 0)); #endif #if _MSC_VER >= 1400 // Disable confusing "helpful" text message on abort, Ctrl-C _set_abort_behavior(0, _WRITE_ABORT_MSG | _CALL_REPORTFAULT); #endif #ifdef WIN32 // Enable Data Execution Prevention (DEP) // Minimum supported OS versions: WinXP SP3, WinVista >= SP1, Win Server 2008 // A failure is non-critical and needs no further attention! #ifndef PROCESS_DEP_ENABLE // We define this here, because GCCs winbase.h limits this to _WIN32_WINNT >= // 0x0601 (Windows 7), which is not correct. Can be removed, when GCCs winbase.h // is fixed! #define PROCESS_DEP_ENABLE 0x00000001 #endif typedef BOOL(WINAPI * PSETPROCDEPPOL)(DWORD); PSETPROCDEPPOL setProcDEPPol = (PSETPROCDEPPOL)GetProcAddress( GetModuleHandleA("Kernel32.dll"), "SetProcessDEPPolicy"); if (setProcDEPPol != nullptr) { setProcDEPPol(PROCESS_DEP_ENABLE); } #endif if (!SetupNetworking()) { return InitError("Initializing networking failed"); } #ifndef WIN32 if (!gArgs.GetBoolArg("-sysperms", false)) { umask(077); } // Clean shutdown on SIGTERM struct sigaction sa; sa.sa_handler = HandleSIGTERM; sigemptyset(&sa.sa_mask); sa.sa_flags = 0; sigaction(SIGTERM, &sa, nullptr); sigaction(SIGINT, &sa, nullptr); // Reopen debug.log on SIGHUP struct sigaction sa_hup; sa_hup.sa_handler = HandleSIGHUP; sigemptyset(&sa_hup.sa_mask); sa_hup.sa_flags = 0; sigaction(SIGHUP, &sa_hup, nullptr); // Ignore SIGPIPE, otherwise it will bring the daemon down if the client // closes unexpectedly signal(SIGPIPE, SIG_IGN); #endif std::set_new_handler(new_handler_terminate); return true; } bool AppInitParameterInteraction(Config &config, RPCServer &rpcServer) { const CChainParams &chainparams = config.GetChainParams(); // Step 2: parameter interactions // also see: InitParameterInteraction() // if using block pruning, then disallow txindex if (gArgs.GetArg("-prune", 0)) { if (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) { return InitError(_("Prune mode is incompatible with -txindex.")); } } // if space reserved for high priority transactions is misconfigured // stop program execution and warn the user with a proper error message const int64_t blkprio = gArgs.GetArg("-blockprioritypercentage", DEFAULT_BLOCK_PRIORITY_PERCENTAGE); if (!config.SetBlockPriorityPercentage(blkprio)) { return InitError(_("Block priority percentage has to belong to the " "[0..100] interval.")); } // -bind and -whitebind can't be set when not listening size_t nUserBind = gArgs.GetArgs("-bind").size() + gArgs.GetArgs("-whitebind").size(); if (nUserBind != 0 && !gArgs.GetBoolArg("-listen", DEFAULT_LISTEN)) { return InitError( "Cannot set -bind or -whitebind together with -listen=0"); } // Make sure enough file descriptors are available int nBind = std::max(nUserBind, size_t(1)); nUserMaxConnections = gArgs.GetArg("-maxconnections", DEFAULT_MAX_PEER_CONNECTIONS); nMaxConnections = std::max(nUserMaxConnections, 0); // Trim requested connection counts, to fit into system limitations nMaxConnections = std::max(std::min(nMaxConnections, (int)(FD_SETSIZE - nBind - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS)), 0); nFD = RaiseFileDescriptorLimit(nMaxConnections + MIN_CORE_FILEDESCRIPTORS + MAX_ADDNODE_CONNECTIONS); if (nFD < MIN_CORE_FILEDESCRIPTORS) { return InitError(_("Not enough file descriptors available.")); } nMaxConnections = std::min(nFD - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS, nMaxConnections); if (nMaxConnections < nUserMaxConnections) { InitWarning(strprintf(_("Reducing -maxconnections from %d to %d, " "because of system limitations."), nUserMaxConnections, nMaxConnections)); } // Step 3: parameter-to-internal-flags if (gArgs.IsArgSet("-debug")) { // Special-case: if -debug=0/-nodebug is set, turn off debugging // messages const std::vector &categories = gArgs.GetArgs("-debug"); if (find(categories.begin(), categories.end(), std::string("0")) == categories.end()) { for (const auto &cat : categories) { BCLog::LogFlags flag; if (!GetLogCategory(flag, cat)) { InitWarning( strprintf(_("Unsupported logging category %s=%s."), "-debug", cat)); } GetLogger().EnableCategory(flag); } } } // Now remove the logging categories which were explicitly excluded for (const std::string &cat : gArgs.GetArgs("-debugexclude")) { BCLog::LogFlags flag; if (!GetLogCategory(flag, cat)) { InitWarning(strprintf(_("Unsupported logging category %s=%s."), "-debugexclude", cat)); } GetLogger().DisableCategory(flag); } // Check for -debugnet if (gArgs.GetBoolArg("-debugnet", false)) { InitWarning( _("Unsupported argument -debugnet ignored, use -debug=net.")); } // Check for -socks - as this is a privacy risk to continue, exit here if (gArgs.IsArgSet("-socks")) { return InitError( _("Unsupported argument -socks found. Setting SOCKS version isn't " "possible anymore, only SOCKS5 proxies are supported.")); } // Check for -tor - as this is a privacy risk to continue, exit here if (gArgs.GetBoolArg("-tor", false)) { return InitError(_("Unsupported argument -tor found, use -onion.")); } if (gArgs.GetBoolArg("-benchmark", false)) { InitWarning( _("Unsupported argument -benchmark ignored, use -debug=bench.")); } if (gArgs.GetBoolArg("-whitelistalwaysrelay", false)) { InitWarning(_("Unsupported argument -whitelistalwaysrelay ignored, use " "-whitelistrelay and/or -whitelistforcerelay.")); } if (gArgs.IsArgSet("-blockminsize")) { InitWarning("Unsupported argument -blockminsize ignored."); } // Checkmempool and checkblockindex default to true in regtest mode int ratio = std::min( std::max( gArgs.GetArg("-checkmempool", chainparams.DefaultConsistencyChecks() ? 1 : 0), 0), 1000000); if (ratio != 0) { g_mempool.setSanityCheck(1.0 / ratio); } fCheckBlockIndex = gArgs.GetBoolArg("-checkblockindex", chainparams.DefaultConsistencyChecks()); fCheckpointsEnabled = gArgs.GetBoolArg("-checkpoints", DEFAULT_CHECKPOINTS_ENABLED); hashAssumeValid = uint256S( gArgs.GetArg("-assumevalid", chainparams.GetConsensus().defaultAssumeValid.GetHex())); if (!hashAssumeValid.IsNull()) { LogPrintf("Assuming ancestors of block %s have valid signatures.\n", hashAssumeValid.GetHex()); } else { LogPrintf("Validating signatures for all blocks.\n"); } if (gArgs.IsArgSet("-minimumchainwork")) { const std::string minChainWorkStr = gArgs.GetArg("-minimumchainwork", ""); if (!IsHexNumber(minChainWorkStr)) { return InitError(strprintf( "Invalid non-hex (%s) minimum chain work value specified", minChainWorkStr)); } nMinimumChainWork = UintToArith256(uint256S(minChainWorkStr)); } else { nMinimumChainWork = UintToArith256(chainparams.GetConsensus().nMinimumChainWork); } LogPrintf("Setting nMinimumChainWork=%s\n", nMinimumChainWork.GetHex()); if (nMinimumChainWork < UintToArith256(chainparams.GetConsensus().nMinimumChainWork)) { LogPrintf("Warning: nMinimumChainWork set below default value of %s\n", chainparams.GetConsensus().nMinimumChainWork.GetHex()); } // mempool limits int64_t nMempoolSizeMax = gArgs.GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000; int64_t nMempoolSizeMin = gArgs.GetArg("-limitdescendantsize", DEFAULT_DESCENDANT_SIZE_LIMIT) * 1000 * 40; if (nMempoolSizeMax < 0 || nMempoolSizeMax < nMempoolSizeMin) { return InitError(strprintf(_("-maxmempool must be at least %d MB"), std::ceil(nMempoolSizeMin / 1000000.0))); } // -par=0 means autodetect, but nScriptCheckThreads==0 means no concurrency nScriptCheckThreads = gArgs.GetArg("-par", DEFAULT_SCRIPTCHECK_THREADS); if (nScriptCheckThreads <= 0) { nScriptCheckThreads += GetNumCores(); } if (nScriptCheckThreads <= 1) { nScriptCheckThreads = 0; } else if (nScriptCheckThreads > MAX_SCRIPTCHECK_THREADS) { nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS; } // Configure excessive block size. const uint64_t nProposedExcessiveBlockSize = gArgs.GetArg("-excessiveblocksize", DEFAULT_MAX_BLOCK_SIZE); if (!config.SetMaxBlockSize(nProposedExcessiveBlockSize)) { return InitError( _("Excessive block size must be > 1,000,000 bytes (1MB)")); } // Check blockmaxsize does not exceed maximum accepted block size. const uint64_t nProposedMaxGeneratedBlockSize = gArgs.GetArg("-blockmaxsize", DEFAULT_MAX_GENERATED_BLOCK_SIZE); if (nProposedMaxGeneratedBlockSize > config.GetMaxBlockSize()) { auto msg = _("Max generated block size (blockmaxsize) cannot exceed " "the excessive block size (excessiveblocksize)"); return InitError(msg); } // block pruning; get the amount of disk space (in MiB) to allot for block & // undo files int64_t nPruneArg = gArgs.GetArg("-prune", 0); if (nPruneArg < 0) { return InitError( _("Prune cannot be configured with a negative value.")); } nPruneTarget = (uint64_t)nPruneArg * 1024 * 1024; if (nPruneArg == 1) { // manual pruning: -prune=1 LogPrintf("Block pruning enabled. Use RPC call " "pruneblockchain(height) to manually prune block and undo " "files.\n"); nPruneTarget = std::numeric_limits::max(); fPruneMode = true; } else if (nPruneTarget) { if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) { return InitError( strprintf(_("Prune configured below the minimum of %d MiB. " "Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); } LogPrintf("Prune configured to target %uMiB on disk for block and undo " "files.\n", nPruneTarget / 1024 / 1024); fPruneMode = true; } RegisterAllRPCCommands(config, rpcServer, tableRPC); g_wallet_init_interface->RegisterRPC(tableRPC); #ifdef ENABLE_WALLET RegisterDumpRPCCommands(tableRPC); #endif nConnectTimeout = gArgs.GetArg("-timeout", DEFAULT_CONNECT_TIMEOUT); if (nConnectTimeout <= 0) { nConnectTimeout = DEFAULT_CONNECT_TIMEOUT; } // Obtain the amount to charge excess UTXO if (gArgs.IsArgSet("-excessutxocharge")) { Amount n = Amount::zero(); auto parsed = ParseMoney(gArgs.GetArg("-excessutxocharge", ""), n); if (!parsed || Amount::zero() > n) { return InitError(AmountErrMsg( "excessutxocharge", gArgs.GetArg("-excessutxocharge", ""))); } config.SetExcessUTXOCharge(n); } else { config.SetExcessUTXOCharge(DEFAULT_UTXO_FEE); } // Fee-per-kilobyte amount considered the same as "free". If you are mining, // be careful setting this: if you set it to zero then a transaction spammer // can cheaply fill blocks using 1-satoshi-fee transactions. It should be // set above the real cost to you of processing a transaction. if (gArgs.IsArgSet("-minrelaytxfee")) { Amount n = Amount::zero(); auto parsed = ParseMoney(gArgs.GetArg("-minrelaytxfee", ""), n); if (!parsed || Amount::zero() == n) { return InitError(AmountErrMsg("minrelaytxfee", gArgs.GetArg("-minrelaytxfee", ""))); } // High fee check is done afterward in WalletParameterInteraction() config.SetMinFeePerKB(CFeeRate(n)); } else { config.SetMinFeePerKB(CFeeRate(DEFAULT_MIN_RELAY_TX_FEE_PER_KB)); } // Sanity check argument for min fee for including tx in block // TODO: Harmonize which arguments need sanity checking and where that // happens. if (gArgs.IsArgSet("-blockmintxfee")) { Amount n = Amount::zero(); if (!ParseMoney(gArgs.GetArg("-blockmintxfee", ""), n)) { return InitError(AmountErrMsg("blockmintxfee", gArgs.GetArg("-blockmintxfee", ""))); } } // Feerate used to define dust. Shouldn't be changed lightly as old // implementations may inadvertently create non-standard transactions. if (gArgs.IsArgSet("-dustrelayfee")) { Amount n = Amount::zero(); auto parsed = ParseMoney(gArgs.GetArg("-dustrelayfee", ""), n); if (!parsed || Amount::zero() == n) { return InitError(AmountErrMsg("dustrelayfee", gArgs.GetArg("-dustrelayfee", ""))); } dustRelayFee = CFeeRate(n); } fRequireStandard = !gArgs.GetBoolArg("-acceptnonstdtxn", !chainparams.RequireStandard()); if (chainparams.RequireStandard() && !fRequireStandard) { return InitError( strprintf("acceptnonstdtxn is not currently supported for %s chain", chainparams.NetworkIDString())); } nBytesPerSigOp = gArgs.GetArg("-bytespersigop", nBytesPerSigOp); if (!g_wallet_init_interface->ParameterInteraction()) { return false; } fIsBareMultisigStd = gArgs.GetBoolArg("-permitbaremultisig", DEFAULT_PERMIT_BAREMULTISIG); fAcceptDatacarrier = gArgs.GetBoolArg("-datacarrier", DEFAULT_ACCEPT_DATACARRIER); // Option to startup with mocktime set (used for regression testing): SetMockTime(gArgs.GetArg("-mocktime", 0)); // SetMockTime(0) is a no-op if (gArgs.GetBoolArg("-peerbloomfilters", DEFAULT_PEERBLOOMFILTERS)) { nLocalServices = ServiceFlags(nLocalServices | NODE_BLOOM); } // Signal Bitcoin Cash support. // TODO: remove some time after the hardfork when no longer needed // to differentiate the network nodes. nLocalServices = ServiceFlags(nLocalServices | NODE_BITCOIN_CASH); nMaxTipAge = gArgs.GetArg("-maxtipage", DEFAULT_MAX_TIP_AGE); return true; } static bool LockDataDirectory(bool probeOnly) { std::string strDataDir = GetDataDir().string(); // Make sure only a single Bitcoin process is using the data directory. fs::path pathLockFile = GetDataDir() / ".lock"; // empty lock file; created if it doesn't exist. FILE *file = fsbridge::fopen(pathLockFile, "a"); if (file) { fclose(file); } try { static boost::interprocess::file_lock lock( pathLockFile.string().c_str()); if (!lock.try_lock()) { return InitError( strprintf(_("Cannot obtain a lock on data directory %s. %s is " "probably already running."), strDataDir, _(PACKAGE_NAME))); } if (probeOnly) { lock.unlock(); } } catch (const boost::interprocess::interprocess_exception &e) { return InitError(strprintf(_("Cannot obtain a lock on data directory " "%s. %s is probably already running.") + " %s.", strDataDir, _(PACKAGE_NAME), e.what())); } return true; } bool AppInitSanityChecks() { // Step 4: sanity checks // Initialize elliptic curve code std::string sha256_algo = SHA256AutoDetect(); LogPrintf("Using the '%s' SHA256 implementation\n", sha256_algo); RandomInit(); ECC_Start(); globalVerifyHandle.reset(new ECCVerifyHandle()); // Sanity check if (!InitSanityCheck()) { return InitError(strprintf( _("Initialization sanity check failed. %s is shutting down."), _(PACKAGE_NAME))); } // Probe the data directory lock to give an early error message, if possible // We cannot hold the data directory lock here, as the forking for daemon() // hasn't yet happened, and a fork will cause weird behavior to it. return LockDataDirectory(true); } bool AppInitLockDataDirectory() { // After daemonization get the data directory lock again and hold on to it // until exit. This creates a slight window for a race condition to happen, // however this condition is harmless: it will at most make us exit without // printing a message to console. if (!LockDataDirectory(false)) { // Detailed error printed inside LockDataDirectory return false; } return true; } bool AppInitMain(Config &config, - HTTPRPCRequestProcessor &httpRPCRequestProcessor, - boost::thread_group &threadGroup, CScheduler &scheduler) { + HTTPRPCRequestProcessor &httpRPCRequestProcessor) { // Step 4a: application initialization const CChainParams &chainparams = config.GetChainParams(); #ifndef WIN32 CreatePidFile(GetPidFile(), getpid()); #endif BCLog::Logger &logger = GetLogger(); bool default_shrinkdebugfile = logger.DefaultShrinkDebugFile(); if (gArgs.GetBoolArg("-shrinkdebugfile", default_shrinkdebugfile)) { // Do this first since it both loads a bunch of debug.log into memory, // and because this needs to happen before any other debug.log printing. logger.ShrinkDebugFile(); } if (logger.m_print_to_file) { logger.OpenDebugLog(); } if (!logger.m_log_timestamps) { LogPrintf("Startup time: %s\n", DateTimeStrFormat("%Y-%m-%d %H:%M:%S", GetTime())); } LogPrintf("Default data directory %s\n", GetDefaultDataDir().string()); LogPrintf("Using data directory %s\n", GetDataDir().string()); LogPrintf( "Using config file %s\n", GetConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)).string()); LogPrintf("Using at most %i automatic connections (%i file descriptors " "available)\n", nMaxConnections, nFD); InitSignatureCache(); InitScriptExecutionCache(); LogPrintf("Using %u threads for script verification\n", nScriptCheckThreads); if (nScriptCheckThreads) { for (int i = 0; i < nScriptCheckThreads - 1; i++) { threadGroup.create_thread(&ThreadScriptCheck); } } // Start the lightweight task scheduler thread CScheduler::Function serviceLoop = boost::bind(&CScheduler::serviceQueue, &scheduler); threadGroup.create_thread(boost::bind(&TraceThread, "scheduler", serviceLoop)); GetMainSignals().RegisterBackgroundSignalScheduler(scheduler); GetMainSignals().RegisterWithMempoolSignals(g_mempool); /** * Start the RPC server. It will be started in "warmup" mode and not * process calls yet (but it will verify that the server is there and will * be ready later). Warmup mode will be completed when initialisation is * finished. */ if (gArgs.GetBoolArg("-server", false)) { uiInterface.InitMessage.connect(SetRPCWarmupStatus); - if (!AppInitServers(config, httpRPCRequestProcessor, threadGroup)) { + if (!AppInitServers(config, httpRPCRequestProcessor)) { return InitError( _("Unable to start HTTP server. See debug log for details.")); } } // Step 5: verify wallet database integrity if (!g_wallet_init_interface->Verify(chainparams)) { return false; } // Step 6: network initialization // Note that we absolutely cannot open any actual connections // until the very end ("start node") as the UTXO/block state // is not yet setup and may end up being set up twice if we // need to reindex later. assert(!g_connman); g_connman = std::unique_ptr( new CConnman(config, GetRand(std::numeric_limits::max()), GetRand(std::numeric_limits::max()))); CConnman &connman = *g_connman; peerLogic.reset(new PeerLogicValidation(&connman, scheduler)); RegisterValidationInterface(peerLogic.get()); if (gArgs.IsArgSet("-onlynet")) { std::set nets; for (const std::string &snet : gArgs.GetArgs("-onlynet")) { enum Network net = ParseNetwork(snet); if (net == NET_UNROUTABLE) { return InitError(strprintf( _("Unknown network specified in -onlynet: '%s'"), snet)); } nets.insert(net); } for (int n = 0; n < NET_MAX; n++) { enum Network net = (enum Network)n; if (!nets.count(net)) SetLimited(net); } } // Check for host lookup allowed before parsing any network related // parameters fNameLookup = gArgs.GetBoolArg("-dns", DEFAULT_NAME_LOOKUP); bool proxyRandomize = gArgs.GetBoolArg("-proxyrandomize", DEFAULT_PROXYRANDOMIZE); // -proxy sets a proxy for all outgoing network traffic // -noproxy (or -proxy=0) as well as the empty string can be used to not set // a proxy, this is the default std::string proxyArg = gArgs.GetArg("-proxy", ""); SetLimited(NET_TOR); if (proxyArg != "" && proxyArg != "0") { CService proxyAddr; if (!Lookup(proxyArg.c_str(), proxyAddr, 9050, fNameLookup)) { return InitError(strprintf( _("Invalid -proxy address or hostname: '%s'"), proxyArg)); } proxyType addrProxy = proxyType(proxyAddr, proxyRandomize); if (!addrProxy.IsValid()) { return InitError(strprintf( _("Invalid -proxy address or hostname: '%s'"), proxyArg)); } SetProxy(NET_IPV4, addrProxy); SetProxy(NET_IPV6, addrProxy); SetProxy(NET_TOR, addrProxy); SetNameProxy(addrProxy); // by default, -proxy sets onion as reachable, unless -noonion later SetLimited(NET_TOR, false); } // -onion can be used to set only a proxy for .onion, or override normal // proxy for .onion addresses. // -noonion (or -onion=0) disables connecting to .onion entirely. An empty // string is used to not override the onion proxy (in which case it defaults // to -proxy set above, or none) std::string onionArg = gArgs.GetArg("-onion", ""); if (onionArg != "") { if (onionArg == "0") { // Handle -noonion/-onion=0 SetLimited(NET_TOR); // set onions as unreachable } else { CService onionProxy; if (!Lookup(onionArg.c_str(), onionProxy, 9050, fNameLookup)) { return InitError(strprintf( _("Invalid -onion address or hostname: '%s'"), onionArg)); } proxyType addrOnion = proxyType(onionProxy, proxyRandomize); if (!addrOnion.IsValid()) { return InitError(strprintf( _("Invalid -onion address or hostname: '%s'"), onionArg)); } SetProxy(NET_TOR, addrOnion); SetLimited(NET_TOR, false); } } // see Step 2: parameter interactions for more information about these fListen = gArgs.GetBoolArg("-listen", DEFAULT_LISTEN); fDiscover = gArgs.GetBoolArg("-discover", true); fRelayTxes = !gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY); for (const std::string &strAddr : gArgs.GetArgs("-externalip")) { CService addrLocal; if (Lookup(strAddr.c_str(), addrLocal, GetListenPort(), fNameLookup) && addrLocal.IsValid()) { AddLocal(addrLocal, LOCAL_MANUAL); } else { return InitError(ResolveErrMsg("externalip", strAddr)); } } #if ENABLE_ZMQ pzmqNotificationInterface = CZMQNotificationInterface::Create(); if (pzmqNotificationInterface) { RegisterValidationInterface(pzmqNotificationInterface); } #endif // unlimited unless -maxuploadtarget is set uint64_t nMaxOutboundLimit = 0; uint64_t nMaxOutboundTimeframe = MAX_UPLOAD_TIMEFRAME; if (gArgs.IsArgSet("-maxuploadtarget")) { nMaxOutboundLimit = gArgs.GetArg("-maxuploadtarget", DEFAULT_MAX_UPLOAD_TARGET) * 1024 * 1024; } // Step 7: load block chain fReindex = gArgs.GetBoolArg("-reindex", false); bool fReindexChainState = gArgs.GetBoolArg("-reindex-chainstate", false); // cache size calculations int64_t nTotalCache = (gArgs.GetArg("-dbcache", nDefaultDbCache) << 20); // total cache cannot be less than nMinDbCache nTotalCache = std::max(nTotalCache, nMinDbCache << 20); // total cache cannot be greater than nMaxDbcache nTotalCache = std::min(nTotalCache, nMaxDbCache << 20); int64_t nBlockTreeDBCache = nTotalCache / 8; nBlockTreeDBCache = std::min(nBlockTreeDBCache, (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX) ? nMaxBlockDBAndTxIndexCache : nMaxBlockDBCache) << 20); nTotalCache -= nBlockTreeDBCache; // use 25%-50% of the remainder for disk cache int64_t nCoinDBCache = std::min(nTotalCache / 2, (nTotalCache / 4) + (1 << 23)); // cap total coins db cache nCoinDBCache = std::min(nCoinDBCache, nMaxCoinsDBCache << 20); nTotalCache -= nCoinDBCache; // the rest goes to in-memory cache nCoinCacheUsage = nTotalCache; int64_t nMempoolSizeMax = gArgs.GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000; LogPrintf("Cache configuration:\n"); LogPrintf("* Using %.1fMiB for block index database\n", nBlockTreeDBCache * (1.0 / 1024 / 1024)); LogPrintf("* Using %.1fMiB for chain state database\n", nCoinDBCache * (1.0 / 1024 / 1024)); LogPrintf("* Using %.1fMiB for in-memory UTXO set (plus up to %.1fMiB of " "unused mempool space)\n", nCoinCacheUsage * (1.0 / 1024 / 1024), nMempoolSizeMax * (1.0 / 1024 / 1024)); int64_t nStart = 0; bool fLoaded = false; while (!fLoaded && !fRequestShutdown) { bool fReset = fReindex; std::string strLoadError; uiInterface.InitMessage(_("Loading block index...")); nStart = GetTimeMillis(); do { try { UnloadBlockIndex(); pcoinsTip.reset(); pcoinsdbview.reset(); pcoinscatcher.reset(); pblocktree.reset( new CBlockTreeDB(nBlockTreeDBCache, false, fReset)); if (fReindex) { pblocktree->WriteReindexing(true); // If we're reindexing in prune mode, wipe away unusable // block files and all undo data files if (fPruneMode) { CleanupBlockRevFiles(); } } if (fRequestShutdown) { break; } // LoadBlockIndex will load fTxIndex from the db, or set it if // we're reindexing. It will also load fHavePruned if we've // ever removed a block file from disk. if (!LoadBlockIndex(config)) { strLoadError = _("Error loading block database"); break; } // If the loaded chain has a wrong genesis, bail out immediately // (we're likely using a testnet datadir, or the other way // around). if (!mapBlockIndex.empty() && mapBlockIndex.count( chainparams.GetConsensus().hashGenesisBlock) == 0) { return InitError(_("Incorrect or no genesis block found. " "Wrong datadir for network?")); } // Check for changed -txindex state if (fTxIndex != gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) { strLoadError = _("You need to rebuild the database using " "-reindex-chainstate to change -txindex"); break; } // Check for changed -prune state. What we are concerned about // is a user who has pruned blocks in the past, but is now // trying to run unpruned. if (fHavePruned && !fPruneMode) { strLoadError = _("You need to rebuild the database using -reindex to " "go back to unpruned mode. This will redownload the " "entire blockchain"); break; } // At this point blocktree args are consistent with what's on // disk. If we're not mid-reindex (based on disk + args), add a // genesis block on disk. This is called again in ThreadImport // if the reindex completes. if (!fReindex && !LoadGenesisBlock(chainparams)) { strLoadError = _("Error initializing block database"); break; } // At this point we're either in reindex or we've loaded a // useful block tree into mapBlockIndex! pcoinsdbview.reset(new CCoinsViewDB( nCoinDBCache, false, fReset || fReindexChainState)); pcoinscatcher.reset( new CCoinsViewErrorCatcher(pcoinsdbview.get())); // If necessary, upgrade from older database format. // This is a no-op if we cleared the coinsviewdb with -reindex // or -reindex-chainstate if (!pcoinsdbview->Upgrade()) { strLoadError = _("Error upgrading chainstate database"); break; } // ReplayBlocks is a no-op if we cleared the coinsviewdb with // -reindex or -reindex-chainstate if (!ReplayBlocks(config, pcoinsdbview.get())) { strLoadError = _("Unable to replay blocks. You will need to rebuild " "the database using -reindex-chainstate."); break; } // The on-disk coinsdb is now in a good state, create the cache pcoinsTip.reset(new CCoinsViewCache(pcoinscatcher.get())); if (!fReindex && !fReindexChainState) { // LoadChainTip sets chainActive based on pcoinsTip's best // block if (!LoadChainTip(config)) { strLoadError = _("Error initializing block database"); break; } assert(chainActive.Tip() != nullptr); } if (!fReindex) { // Note that RewindBlockIndex MUST run even if we're about // to -reindex-chainstate. It both disconnects blocks based // on chainActive, and drops block data in mapBlockIndex // based on lack of available witness data. uiInterface.InitMessage(_("Rewinding blocks...")); if (!RewindBlockIndex(config)) { strLoadError = _("Unable to rewind the database to a " "pre-fork state. You will need to " "redownload the blockchain"); break; } } if (!fReindex && !fReindexChainState) { uiInterface.InitMessage(_("Verifying blocks...")); if (fHavePruned && gArgs.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS) > MIN_BLOCKS_TO_KEEP) { LogPrintf("Prune: pruned datadir may not have more " "than %d blocks; only checking available " "blocks", MIN_BLOCKS_TO_KEEP); } { LOCK(cs_main); CBlockIndex *tip = chainActive.Tip(); RPCNotifyBlockChange(true, tip); if (tip && tip->nTime > GetAdjustedTime() + MAX_FUTURE_BLOCK_TIME) { strLoadError = _("The block database contains a block which " "appears to be from the future. This may be " "due to your computer's date and time being " "set incorrectly. Only rebuild the block " "database if you are sure that your " "computer's date and time are correct"); break; } } if (!CVerifyDB().VerifyDB( config, pcoinsdbview.get(), gArgs.GetArg("-checklevel", DEFAULT_CHECKLEVEL), gArgs.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS))) { strLoadError = _("Corrupted block database detected"); break; } } } catch (const std::exception &e) { LogPrintf("%s\n", e.what()); strLoadError = _("Error opening block database"); break; } fLoaded = true; } while (false); if (!fLoaded && !fRequestShutdown) { // first suggest a reindex if (!fReset) { bool fRet = uiInterface.ThreadSafeQuestion( strLoadError + ".\n\n" + _("Do you want to rebuild the block database now?"), strLoadError + ".\nPlease restart with -reindex or " "-reindex-chainstate to recover.", "", CClientUIInterface::MSG_ERROR | CClientUIInterface::BTN_ABORT); if (fRet) { fReindex = true; fRequestShutdown = false; } else { LogPrintf("Aborted block database rebuild. Exiting.\n"); return false; } } else { return InitError(strLoadError); } } } // As LoadBlockIndex can take several minutes, it's possible the user // requested to kill the GUI during the last operation. If so, exit. // As the program has not fully started yet, Shutdown() is possibly // overkill. if (fRequestShutdown) { LogPrintf("Shutdown requested. Exiting.\n"); return false; } LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart); fs::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME; CAutoFile est_filein(fsbridge::fopen(est_path, "rb"), SER_DISK, CLIENT_VERSION); // Allowed to fail as this file IS missing on first startup. if (!est_filein.IsNull()) { g_mempool.ReadFeeEstimates(est_filein); } fFeeEstimatesInitialized = true; // Encoded addresses using cashaddr instead of base58 // Activates by default on Jan, 14 config.SetCashAddrEncoding( gArgs.GetBoolArg("-usecashaddr", GetAdjustedTime() > 1515900000)); // Step 8: load wallet if (!g_wallet_init_interface->Open(chainparams)) { return false; } // Step 9: data directory maintenance // if pruning, unset the service bit and perform the initial blockstore // prune after any wallet rescanning has taken place. if (fPruneMode) { LogPrintf("Unsetting NODE_NETWORK on prune mode\n"); nLocalServices = ServiceFlags(nLocalServices & ~NODE_NETWORK); if (!fReindex) { uiInterface.InitMessage(_("Pruning blockstore...")); PruneAndFlush(); } } // Step 10: import blocks if (!CheckDiskSpace()) { return false; } // Either install a handler to notify us when genesis activates, or set // fHaveGenesis directly. // No locking, as this happens before any background thread is started. if (chainActive.Tip() == nullptr) { uiInterface.NotifyBlockTip.connect(BlockNotifyGenesisWait); } else { fHaveGenesis = true; } if (gArgs.IsArgSet("-blocknotify")) { uiInterface.NotifyBlockTip.connect(BlockNotifyCallback); } std::vector vImportFiles; for (const std::string &strFile : gArgs.GetArgs("-loadblock")) { vImportFiles.push_back(strFile); } threadGroup.create_thread( boost::bind(&ThreadImport, std::ref(config), vImportFiles)); // Wait for genesis block to be processed { WAIT_LOCK(cs_GenesisWait, lock); // We previously could hang here if StartShutdown() is called prior to // ThreadImport getting started, so instead we just wait on a timer to // check ShutdownRequested() regularly. while (!fHaveGenesis && !ShutdownRequested()) { condvar_GenesisWait.wait_for(lock, std::chrono::milliseconds(500)); } uiInterface.NotifyBlockTip.disconnect(BlockNotifyGenesisWait); } // Step 11: start node int chain_active_height; //// debug print { LOCK(cs_main); LogPrintf("mapBlockIndex.size() = %u\n", mapBlockIndex.size()); chain_active_height = chainActive.Height(); } LogPrintf("nBestHeight = %d\n", chain_active_height); if (gArgs.GetBoolArg("-listenonion", DEFAULT_LISTEN_ONION)) { StartTorControl(); } Discover(); // Map ports with UPnP if (gArgs.GetBoolArg("-upnp", DEFAULT_UPNP)) { StartMapPort(); } CConnman::Options connOptions; connOptions.nLocalServices = nLocalServices; connOptions.nMaxConnections = nMaxConnections; connOptions.nMaxOutbound = std::min(MAX_OUTBOUND_CONNECTIONS, connOptions.nMaxConnections); connOptions.nMaxAddnode = MAX_ADDNODE_CONNECTIONS; connOptions.nMaxFeeler = 1; connOptions.nBestHeight = chain_active_height; connOptions.uiInterface = &uiInterface; connOptions.m_msgproc = peerLogic.get(); connOptions.nSendBufferMaxSize = 1000 * gArgs.GetArg("-maxsendbuffer", DEFAULT_MAXSENDBUFFER); connOptions.nReceiveFloodSize = 1000 * gArgs.GetArg("-maxreceivebuffer", DEFAULT_MAXRECEIVEBUFFER); connOptions.m_added_nodes = gArgs.GetArgs("-addnode"); connOptions.nMaxOutboundTimeframe = nMaxOutboundTimeframe; connOptions.nMaxOutboundLimit = nMaxOutboundLimit; for (const std::string &strBind : gArgs.GetArgs("-bind")) { CService addrBind; if (!Lookup(strBind.c_str(), addrBind, GetListenPort(), false)) { return InitError(ResolveErrMsg("bind", strBind)); } connOptions.vBinds.push_back(addrBind); } for (const std::string &strBind : gArgs.GetArgs("-whitebind")) { CService addrBind; if (!Lookup(strBind.c_str(), addrBind, 0, false)) { return InitError(ResolveErrMsg("whitebind", strBind)); } if (addrBind.GetPort() == 0) { return InitError(strprintf( _("Need to specify a port with -whitebind: '%s'"), strBind)); } connOptions.vWhiteBinds.push_back(addrBind); } for (const auto &net : gArgs.GetArgs("-whitelist")) { CSubNet subnet; LookupSubNet(net.c_str(), subnet); if (!subnet.IsValid()) { return InitError(strprintf( _("Invalid netmask specified in -whitelist: '%s'"), net)); } connOptions.vWhitelistedRange.push_back(subnet); } connOptions.vSeedNodes = gArgs.GetArgs("-seednode"); // Initiate outbound connections unless connect=0 connOptions.m_use_addrman_outgoing = !gArgs.IsArgSet("-connect"); if (!connOptions.m_use_addrman_outgoing) { const auto connect = gArgs.GetArgs("-connect"); if (connect.size() != 1 || connect[0] != "0") { connOptions.m_specified_outgoing = connect; } } if (!connman.Start(scheduler, connOptions)) { return false; } // Step 12: finished SetRPCWarmupFinished(); uiInterface.InitMessage(_("Done loading")); g_wallet_init_interface->Start(scheduler); return !fRequestShutdown; } diff --git a/src/init.h b/src/init.h index 277edeeb3..755145339 100644 --- a/src/init.h +++ b/src/init.h @@ -1,85 +1,84 @@ // Copyright (c) 2009-2010 Satoshi Nakamoto // Copyright (c) 2009-2016 The Bitcoin Core developers // Copyright (c) 2018 The Bitcoin developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #ifndef BITCOIN_INIT_H #define BITCOIN_INIT_H #include #include class Config; class CScheduler; class CWallet; class HTTPRPCRequestProcessor; class RPCServer; class WalletInitInterface; extern std::unique_ptr g_wallet_init_interface; namespace boost { class thread_group; } // namespace boost void StartShutdown(); bool ShutdownRequested(); /** Interrupt threads */ -void Interrupt(boost::thread_group &threadGroup); +void Interrupt(); void Shutdown(); //! Initialize the logging infrastructure void InitLogging(); //! Parameter interaction: change current parameters depending on various rules void InitParameterInteraction(); /** * Initialize bitcoin: Basic context setup. * @note This can be done before daemonization. * Do not call Shutdown() if this function fails. * @pre Parameters should be parsed and config file should be read. */ bool AppInitBasicSetup(); /** * Initialization: parameter interaction. * @note This can be done before daemonization. * Do not call Shutdown() if this function fails. * @pre Parameters should be parsed and config file should be read, * AppInitBasicSetup should have been called. */ bool AppInitParameterInteraction(Config &config, RPCServer &rpcServer); /** * Initialization sanity checks: ecc init, sanity checks, dir lock. * @note This can be done before daemonization. * Do not call Shutdown() if this function fails. * @pre Parameters should be parsed and config file should be read, * AppInitParameterInteraction should have been called. */ bool AppInitSanityChecks(); /** * Lock bitcoin data directory. * @note This should only be done after daemonization. * Do not call Shutdown() if this function fails. * @pre Parameters should be parsed and config file should be read, * AppInitSanityChecks should have been called. */ bool AppInitLockDataDirectory(); /** * Bitcoin main initialization. * @note This should only be done after daemonization. * @pre Parameters should be parsed and config file should be read, * AppInitLockDataDirectory should have been called. */ bool AppInitMain(Config &config, - HTTPRPCRequestProcessor &httpRPCRequestProcessor, - boost::thread_group &threadGroup, CScheduler &scheduler); + HTTPRPCRequestProcessor &httpRPCRequestProcessor); /** The help message mode determines what help message to show */ enum HelpMessageMode { HMM_BITCOIND, HMM_BITCOIN_QT }; /** Help for options shared between UI and daemon (for -help) */ std::string HelpMessage(HelpMessageMode mode); /** Returns licensing information (for -version) */ std::string LicenseInfo(); #endif // BITCOIN_INIT_H diff --git a/src/qt/bitcoin.cpp b/src/qt/bitcoin.cpp index 25001e360..fb3d08249 100644 --- a/src/qt/bitcoin.cpp +++ b/src/qt/bitcoin.cpp @@ -1,833 +1,827 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #if defined(HAVE_CONFIG_H) #include "config/bitcoin-config.h" #endif #include "bitcoingui.h" #include "chainparams.h" #include "clientmodel.h" #include "config.h" #include "guiconstants.h" #include "guiutil.h" #include "httprpc.h" #include "intro.h" #include "networkstyle.h" #include "optionsmodel.h" #include "platformstyle.h" #include "splashscreen.h" #include "utilitydialog.h" #include "winshutdownmonitor.h" #ifdef ENABLE_WALLET #include "paymentserver.h" #include "walletmodel.h" #endif #include "init.h" #include "rpc/server.h" -#include "scheduler.h" #include "ui_interface.h" #include "uint256.h" #include "util.h" #include "warnings.h" #ifdef ENABLE_WALLET #include "wallet/init.h" #include "wallet/wallet.h" #endif #include "walletinitinterface.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(QT_STATICPLUGIN) #include #if QT_VERSION < 0x050400 Q_IMPORT_PLUGIN(AccessibleFactory) #endif #if defined(QT_QPA_PLATFORM_XCB) Q_IMPORT_PLUGIN(QXcbIntegrationPlugin); #elif defined(QT_QPA_PLATFORM_WINDOWS) Q_IMPORT_PLUGIN(QWindowsIntegrationPlugin); #elif defined(QT_QPA_PLATFORM_COCOA) Q_IMPORT_PLUGIN(QCocoaIntegrationPlugin); #endif #endif // Declare meta types used for QMetaObject::invokeMethod Q_DECLARE_METATYPE(bool *) Q_DECLARE_METATYPE(Amount) Q_DECLARE_METATYPE(uint256) // Config is non-copyable so we can only register pointers to it Q_DECLARE_METATYPE(Config *) static void InitMessage(const std::string &message) { LogPrintf("init message: %s\n", message); } /** * Translate string to current locale using Qt. */ static std::string Translate(const char *psz) { return QCoreApplication::translate("bitcoin-abc", psz).toStdString(); } static QString GetLangTerritory() { QSettings settings; // Get desired locale (e.g. "de_DE") // 1) System default language QString lang_territory = QLocale::system().name(); // 2) Language from QSettings QString lang_territory_qsettings = settings.value("language", "").toString(); if (!lang_territory_qsettings.isEmpty()) { lang_territory = lang_territory_qsettings; } // 3) -lang command line argument lang_territory = QString::fromStdString( gArgs.GetArg("-lang", lang_territory.toStdString())); return lang_territory; } /** Set up translations */ static void initTranslations(QTranslator &qtTranslatorBase, QTranslator &qtTranslator, QTranslator &translatorBase, QTranslator &translator) { // Remove old translators QApplication::removeTranslator(&qtTranslatorBase); QApplication::removeTranslator(&qtTranslator); QApplication::removeTranslator(&translatorBase); QApplication::removeTranslator(&translator); // Get desired locale (e.g. "de_DE") // 1) System default language QString lang_territory = GetLangTerritory(); // Convert to "de" only by truncating "_DE" QString lang = lang_territory; lang.truncate(lang_territory.lastIndexOf('_')); // Load language files for configured locale: // - First load the translator for the base language, without territory // - Then load the more specific locale translator // Load e.g. qt_de.qm if (qtTranslatorBase.load( "qt_" + lang, QLibraryInfo::location(QLibraryInfo::TranslationsPath))) { QApplication::installTranslator(&qtTranslatorBase); } // Load e.g. qt_de_DE.qm if (qtTranslator.load( "qt_" + lang_territory, QLibraryInfo::location(QLibraryInfo::TranslationsPath))) { QApplication::installTranslator(&qtTranslator); } // Load e.g. bitcoin_de.qm (shortcut "de" needs to be defined in // bitcoin.qrc) if (translatorBase.load(lang, ":/translations/")) { QApplication::installTranslator(&translatorBase); } // Load e.g. bitcoin_de_DE.qm (shortcut "de_DE" needs to be defined in // bitcoin.qrc) if (translator.load(lang_territory, ":/translations/")) { QApplication::installTranslator(&translator); } } /* qDebug() message handler --> debug.log */ void DebugMessageHandler(QtMsgType type, const QMessageLogContext &context, const QString &msg) { Q_UNUSED(context); if (type == QtDebugMsg) { LogPrint(BCLog::QT, "GUI: %s\n", msg.toStdString()); } else { LogPrintf("GUI: %s\n", msg.toStdString()); } } /** * Class encapsulating Bitcoin ABC startup and shutdown. * Allows running startup and shutdown in a different thread from the UI thread. */ class BitcoinABC : public QObject { Q_OBJECT public: explicit BitcoinABC(); /** * Basic initialization, before starting initialization/shutdown thread. * Return true on success. */ static bool baseInitialize(Config &config, RPCServer &rpcServer); public Q_SLOTS: void initialize(Config *config, HTTPRPCRequestProcessor *httpRPCRequestProcessor); void shutdown(); Q_SIGNALS: void initializeResult(bool success); void shutdownResult(); void runawayException(const QString &message); private: - boost::thread_group threadGroup; - CScheduler scheduler; - /// Pass fatal exception message to UI thread void handleRunawayException(const std::exception *e); }; /** Main Bitcoin application object */ class BitcoinApplication : public QApplication { Q_OBJECT public: explicit BitcoinApplication(int &argc, char **argv); ~BitcoinApplication(); #ifdef ENABLE_WALLET /// Create payment server void createPaymentServer(); #endif /// parameter interaction/setup based on rules void parameterSetup(); /// Create options model void createOptionsModel(bool resetSettings); /// Create main window void createWindow(const Config *, const NetworkStyle *networkStyle); /// Create splash screen void createSplashScreen(const NetworkStyle *networkStyle); /// Request core initialization void requestInitialize(Config &config, HTTPRPCRequestProcessor &httpRPCRequestProcessor, RPCServer &rpcServer); /// Request core shutdown void requestShutdown(Config &config); /// Get process return value int getReturnValue() { return returnValue; } /// Get window identifier of QMainWindow (BitcoinGUI) WId getMainWinId() const; public Q_SLOTS: void initializeResult(bool success); void shutdownResult(); /// Handle runaway exceptions. Shows a message box with the problem and /// quits the program. void handleRunawayException(const QString &message); Q_SIGNALS: void requestedInitialize(Config *config, HTTPRPCRequestProcessor *httpRPCRequestProcessor, RPCServer *rpcServer); void requestedShutdown(); void stopThread(); void splashFinished(QWidget *window); private: QThread *coreThread; OptionsModel *optionsModel; ClientModel *clientModel; BitcoinGUI *window; QTimer *pollShutdownTimer; #ifdef ENABLE_WALLET PaymentServer *paymentServer; std::vector m_wallet_models; #endif int returnValue; const PlatformStyle *platformStyle; std::unique_ptr shutdownWindow; void startThread(); }; #include "bitcoin.moc" BitcoinABC::BitcoinABC() : QObject() {} void BitcoinABC::handleRunawayException(const std::exception *e) { PrintExceptionContinue(e, "Runaway exception"); Q_EMIT runawayException(QString::fromStdString(GetWarnings("gui"))); } bool BitcoinABC::baseInitialize(Config &config, RPCServer &rpcServer) { if (!AppInitBasicSetup()) { return false; } if (!AppInitParameterInteraction(config, rpcServer)) { return false; } if (!AppInitSanityChecks()) { return false; } if (!AppInitLockDataDirectory()) { return false; } return true; } void BitcoinABC::initialize(Config *cfg, HTTPRPCRequestProcessor *httpRPCRequestProcessor) { Config &config(*cfg); try { qDebug() << __func__ << ": Running initialization in thread"; - bool rv = AppInitMain(config, *httpRPCRequestProcessor, threadGroup, - scheduler); + bool rv = AppInitMain(config, *httpRPCRequestProcessor); Q_EMIT initializeResult(rv); } catch (const std::exception &e) { handleRunawayException(&e); } catch (...) { handleRunawayException(nullptr); } } void BitcoinABC::shutdown() { try { qDebug() << __func__ << ": Running Shutdown in thread"; - Interrupt(threadGroup); - threadGroup.join_all(); + Interrupt(); Shutdown(); qDebug() << __func__ << ": Shutdown finished"; Q_EMIT shutdownResult(); } catch (const std::exception &e) { handleRunawayException(&e); } catch (...) { handleRunawayException(nullptr); } } BitcoinApplication::BitcoinApplication(int &argc, char **argv) : QApplication(argc, argv), coreThread(0), optionsModel(0), clientModel(0), window(0), pollShutdownTimer(0), #ifdef ENABLE_WALLET paymentServer(0), m_wallet_models(), #endif returnValue(0) { setQuitOnLastWindowClosed(false); // UI per-platform customization. // This must be done inside the BitcoinApplication constructor, or after it, // because PlatformStyle::instantiate requires a QApplication. std::string platformName; platformName = gArgs.GetArg("-uiplatform", BitcoinGUI::DEFAULT_UIPLATFORM); platformStyle = PlatformStyle::instantiate(QString::fromStdString(platformName)); // Fall back to "other" if specified name not found. if (!platformStyle) { platformStyle = PlatformStyle::instantiate("other"); } assert(platformStyle); } BitcoinApplication::~BitcoinApplication() { if (coreThread) { qDebug() << __func__ << ": Stopping thread"; Q_EMIT stopThread(); coreThread->wait(); qDebug() << __func__ << ": Stopped thread"; } delete window; window = 0; #ifdef ENABLE_WALLET delete paymentServer; paymentServer = 0; #endif delete optionsModel; optionsModel = 0; delete platformStyle; platformStyle = 0; } #ifdef ENABLE_WALLET void BitcoinApplication::createPaymentServer() { paymentServer = new PaymentServer(this); } #endif void BitcoinApplication::createOptionsModel(bool resetSettings) { optionsModel = new OptionsModel(nullptr, resetSettings); } void BitcoinApplication::createWindow(const Config *config, const NetworkStyle *networkStyle) { window = new BitcoinGUI(config, platformStyle, networkStyle, 0); pollShutdownTimer = new QTimer(window); connect(pollShutdownTimer, SIGNAL(timeout()), window, SLOT(detectShutdown())); pollShutdownTimer->start(200); } void BitcoinApplication::createSplashScreen(const NetworkStyle *networkStyle) { SplashScreen *splash = new SplashScreen(0, networkStyle); // We don't hold a direct pointer to the splash screen after creation, but // the splash screen will take care of deleting itself when slotFinish // happens. splash->show(); connect(this, SIGNAL(splashFinished(QWidget *)), splash, SLOT(slotFinish(QWidget *))); connect(this, SIGNAL(requestedShutdown()), splash, SLOT(close())); } void BitcoinApplication::startThread() { if (coreThread) { return; } coreThread = new QThread(this); BitcoinABC *executor = new BitcoinABC(); executor->moveToThread(coreThread); /* communication to and from thread */ connect(executor, SIGNAL(initializeResult(bool)), this, SLOT(initializeResult(bool))); connect(executor, SIGNAL(shutdownResult()), this, SLOT(shutdownResult())); connect(executor, SIGNAL(runawayException(QString)), this, SLOT(handleRunawayException(QString))); // Note on how Qt works: it tries to directly invoke methods if the signal // is emitted on the same thread that the target object 'lives' on. // But if the target object 'lives' on another thread (executor here does) // the SLOT will be invoked asynchronously at a later time in the thread // of the target object. So.. we pass a pointer around. If you pass // a reference around (even if it's non-const) you'll get Qt generating // code to copy-construct the parameter in question (Q_DECLARE_METATYPE // and qRegisterMetaType generate this code). For the Config class, // which is noncopyable, we can't do this. So.. we have to pass // pointers to Config around. Make sure Config &/Config * isn't a // temporary (eg it lives somewhere aside from the stack) or this will // crash because initialize() gets executed in another thread at some // unspecified time (after) requestedInitialize() is emitted! connect(this, SIGNAL(requestedInitialize( Config *, HTTPRPCRequestProcessor *, RPCServer *)), executor, SLOT(initialize(Config *, HTTPRPCRequestProcessor *))); connect(this, SIGNAL(requestedShutdown()), executor, SLOT(shutdown())); /* make sure executor object is deleted in its own thread */ connect(this, SIGNAL(stopThread()), executor, SLOT(deleteLater())); connect(this, SIGNAL(stopThread()), coreThread, SLOT(quit())); coreThread->start(); } void BitcoinApplication::parameterSetup() { InitLogging(); InitParameterInteraction(); } void BitcoinApplication::requestInitialize( Config &config, HTTPRPCRequestProcessor &httpRPCRequestProcessor, RPCServer &rpcServer) { qDebug() << __func__ << ": Requesting initialize"; startThread(); // IMPORTANT: config must NOT be a reference to a temporary because below // signal may be connected to a slot that will be executed as a queued // connection in another thread! Q_EMIT requestedInitialize(&config, &httpRPCRequestProcessor, &rpcServer); } void BitcoinApplication::requestShutdown(Config &config) { // Show a simple window indicating shutdown status. Do this first as some of // the steps may take some time below, for example the RPC console may still // be executing a command. shutdownWindow.reset(ShutdownWindow::showShutdownWindow(window)); qDebug() << __func__ << ": Requesting shutdown"; startThread(); window->hide(); window->setClientModel(0); pollShutdownTimer->stop(); #ifdef ENABLE_WALLET window->removeAllWallets(); for (WalletModel *walletModel : m_wallet_models) { delete walletModel; } m_wallet_models.clear(); #endif delete clientModel; clientModel = 0; StartShutdown(); // Request shutdown from core thread Q_EMIT requestedShutdown(); } void BitcoinApplication::initializeResult(bool success) { qDebug() << __func__ << ": Initialization result: " << success; returnValue = success ? EXIT_SUCCESS : EXIT_FAILURE; if (!success) { // Make sure splash screen doesn't stick around during shutdown. Q_EMIT splashFinished(window); // Exit first main loop invocation. quit(); return; } // Log this only after AppInit2 finishes, as then logging setup is // guaranteed complete. qWarning() << "Platform customization:" << platformStyle->getName(); #ifdef ENABLE_WALLET PaymentServer::LoadRootCAs(); paymentServer->setOptionsModel(optionsModel); #endif clientModel = new ClientModel(optionsModel); window->setClientModel(clientModel); #ifdef ENABLE_WALLET bool fFirstWallet = true; for (CWalletRef pwallet : vpwallets) { WalletModel *const walletModel = new WalletModel(platformStyle, pwallet, optionsModel); window->addWallet(walletModel); if (fFirstWallet) { window->setCurrentWallet(walletModel->getWalletName()); fFirstWallet = false; } connect(walletModel, SIGNAL(coinsSent(CWallet *, SendCoinsRecipient, QByteArray)), paymentServer, SLOT(fetchPaymentACK(CWallet *, const SendCoinsRecipient &, QByteArray))); m_wallet_models.push_back(walletModel); } #endif // If -min option passed, start window minimized. if (gArgs.GetBoolArg("-min", false)) { window->showMinimized(); } else { window->show(); } Q_EMIT splashFinished(window); #ifdef ENABLE_WALLET // Now that initialization/startup is done, process any command-line // bitcoincash: URIs or payment requests: connect(paymentServer, SIGNAL(receivedPaymentRequest(SendCoinsRecipient)), window, SLOT(handlePaymentRequest(SendCoinsRecipient))); connect(window, SIGNAL(receivedURI(QString)), paymentServer, SLOT(handleURIOrFile(QString))); connect(paymentServer, SIGNAL(message(QString, QString, unsigned int)), window, SLOT(message(QString, QString, unsigned int))); QTimer::singleShot(100, paymentServer, SLOT(uiReady())); #endif } void BitcoinApplication::shutdownResult() { // Exit second main loop invocation after shutdown finished. quit(); } void BitcoinApplication::handleRunawayException(const QString &message) { QMessageBox::critical( 0, "Runaway exception", BitcoinGUI::tr("A fatal error occurred. Bitcoin can no longer continue " "safely and will quit.") + QString("\n\n") + message); ::exit(EXIT_FAILURE); } WId BitcoinApplication::getMainWinId() const { if (!window) { return 0; } return window->winId(); } #ifndef BITCOIN_QT_TEST static void MigrateSettings() { assert(!QApplication::applicationName().isEmpty()); static const QString legacyAppName("Bitcoin-Qt"), #ifdef Q_OS_DARWIN // Macs and/or iOS et al use a domain-style name for Settings // files. All other platforms use a simple orgname. This // difference is documented in the QSettings class documentation. legacyOrg("bitcoin.org"); #else legacyOrg("Bitcoin"); #endif QSettings // below picks up settings file location based on orgname,appname legacy(legacyOrg, legacyAppName), // default c'tor below picks up settings file location based on // QApplication::applicationName(), et al -- which was already set // in main() abc; #ifdef Q_OS_DARWIN // Disable bogus OSX keys from MacOS system-wide prefs that may cloud our // judgement ;) (this behavior is also documented in QSettings docs) legacy.setFallbacksEnabled(false); abc.setFallbacksEnabled(false); #endif const QStringList legacyKeys(legacy.allKeys()); // We only migrate settings if we have Core settings but no Bitcoin-ABC // settings if (!legacyKeys.isEmpty() && abc.allKeys().isEmpty()) { for (const QString &key : legacyKeys) { // now, copy settings over abc.setValue(key, legacy.value(key)); } } } int main(int argc, char *argv[]) { SetupEnvironment(); /// 1. Parse command-line options. These take precedence over anything else. // Command-line options take precedence: gArgs.ParseParameters(argc, argv); // Do not refer to data directory yet, this can be overridden by // Intro::pickDataDirectory /// 2. Basic Qt initialization (not dependent on parameters or /// configuration) Q_INIT_RESOURCE(bitcoin); Q_INIT_RESOURCE(bitcoin_locale); BitcoinApplication app(argc, argv); #if QT_VERSION > 0x050100 // Generate high-dpi pixmaps QApplication::setAttribute(Qt::AA_UseHighDpiPixmaps); #endif #if QT_VERSION >= 0x050600 QGuiApplication::setAttribute(Qt::AA_EnableHighDpiScaling); #endif #ifdef Q_OS_MAC QApplication::setAttribute(Qt::AA_DontShowIconsInMenus); #endif #if QT_VERSION >= 0x050500 // Because of the POODLE attack it is recommended to disable SSLv3 // (https://disablessl3.com/), so set SSL protocols to TLS1.0+. QSslConfiguration sslconf = QSslConfiguration::defaultConfiguration(); sslconf.setProtocol(QSsl::TlsV1_0OrLater); QSslConfiguration::setDefaultConfiguration(sslconf); #endif // Register meta types used for QMetaObject::invokeMethod qRegisterMetaType(); // Need to pass name here as Amount is a typedef (see // http://qt-project.org/doc/qt-5/qmetatype.html#qRegisterMetaType) // IMPORTANT if it is no longer a typedef use the normal variant above qRegisterMetaType("Amount"); qRegisterMetaType>("std::function"); // Need to register any types Qt doesn't know about if you intend // to use them with the signal/slot mechanism Qt provides. Even pointers. // Note that class Config is noncopyable and so we can't register a // non-pointer version of it with Qt, because Qt expects to be able to // copy-construct non-pointers to objects for invoking slots // behind-the-scenes in the 'Queued' connection case. qRegisterMetaType(); /// 3. Application identification // must be set before OptionsModel is initialized or translations are // loaded, as it is used to locate QSettings. // Note: If you move these calls somewhere else, be sure to bring // MigrateSettings() below along for the ride. QApplication::setOrganizationName(QAPP_ORG_NAME); QApplication::setOrganizationDomain(QAPP_ORG_DOMAIN); QApplication::setApplicationName(QAPP_APP_NAME_DEFAULT); // Migrate settings from core's/our old GUI settings to Bitcoin ABC // only if core's exist but Bitcoin ABC's doesn't. // NOTE -- this function needs to be called *after* the above 3 lines // that set the app orgname and app name! If you move the above 3 lines // to elsewhere, take this call with you! MigrateSettings(); GUIUtil::SubstituteFonts(GetLangTerritory()); /// 4. Initialization of translations, so that intro dialog is in user's /// language. Now that QSettings are accessible, initialize translations. QTranslator qtTranslatorBase, qtTranslator, translatorBase, translator; initTranslations(qtTranslatorBase, qtTranslator, translatorBase, translator); translationInterface.Translate.connect(Translate); // Show help message immediately after parsing command-line options (for // "-lang") and setting locale, but before showing splash screen. if (HelpRequested(gArgs) || gArgs.IsArgSet("-version")) { HelpMessageDialog help(nullptr, gArgs.IsArgSet("-version")); help.showOrPrint(); return EXIT_SUCCESS; } /// 5. Now that settings and translations are available, ask user for data /// directory. User language is set up: pick a data directory. if (!Intro::pickDataDirectory()) { return EXIT_SUCCESS; } /// 6. Determine availability of data directory and parse bitcoin.conf /// - Do not call GetDataDir(true) before this step finishes. if (!fs::is_directory(GetDataDir(false))) { QMessageBox::critical( 0, QObject::tr(PACKAGE_NAME), QObject::tr( "Error: Specified data directory \"%1\" does not exist.") .arg(QString::fromStdString(gArgs.GetArg("-datadir", "")))); return EXIT_FAILURE; } try { gArgs.ReadConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)); } catch (const std::exception &e) { QMessageBox::critical( 0, QObject::tr(PACKAGE_NAME), QObject::tr("Error: Cannot parse configuration file: %1. Only use " "key=value syntax.") .arg(e.what())); return EXIT_FAILURE; } /// 7. Determine network (and switch to network specific options) // - Do not call Params() before this step. // - Do this after parsing the configuration file, as the network can be // switched there. // - QSettings() will use the new application name after this, resulting in // network-specific settings. // - Needs to be done before createOptionsModel. // Check for -testnet or -regtest parameter (Params() calls are only valid // after this clause) try { SelectParams(gArgs.GetChainName()); } catch (std::exception &e) { QMessageBox::critical(0, QObject::tr(PACKAGE_NAME), QObject::tr("Error: %1").arg(e.what())); return EXIT_FAILURE; } #ifdef ENABLE_WALLET // Parse URIs on command line -- this can affect Params() PaymentServer::ipcParseCommandLine(argc, argv); #endif QScopedPointer networkStyle(NetworkStyle::instantiate( QString::fromStdString(Params().NetworkIDString()))); assert(!networkStyle.isNull()); // Allow for separate UI settings for testnets QApplication::setApplicationName(networkStyle->getAppName()); // Re-initialize translations after changing application name (language in // network-specific settings can be different) initTranslations(qtTranslatorBase, qtTranslator, translatorBase, translator); #ifdef ENABLE_WALLET /// 8. URI IPC sending // - Do this early as we don't want to bother initializing if we are just // calling IPC // - Do this *after* setting up the data directory, as the data directory // hash is used in the name // of the server. // - Do this after creating app and setting up translations, so errors are // translated properly. if (PaymentServer::ipcSendCommandLine()) { exit(EXIT_SUCCESS); } // Start up the payment server early, too, so impatient users that click on // bitcoincash: links repeatedly have their payment requests routed to this // process: app.createPaymentServer(); // Hook up the wallet init interface g_wallet_init_interface.reset(new WalletInit); #else g_wallet_init_interface.reset(new DummyWalletInit); #endif /// 9. Main GUI initialization // Install global event filter that makes sure that long tooltips can be // word-wrapped. app.installEventFilter( new GUIUtil::ToolTipToRichTextFilter(TOOLTIP_WRAP_THRESHOLD, &app)); #if defined(Q_OS_WIN) // Install global event filter for processing Windows session related // Windows messages (WM_QUERYENDSESSION and WM_ENDSESSION) qApp->installNativeEventFilter(new WinShutdownMonitor()); #endif // Install qDebug() message handler to route to debug.log qInstallMessageHandler(DebugMessageHandler); // Allow parameter interaction before we create the options model app.parameterSetup(); // Load GUI settings from QSettings app.createOptionsModel(gArgs.GetBoolArg("-resetguisettings", false)); // Subscribe to global signals from core uiInterface.InitMessage.connect(InitMessage); // Get global config Config &config = const_cast(GetConfig()); if (gArgs.GetBoolArg("-splash", DEFAULT_SPLASHSCREEN) && !gArgs.GetBoolArg("-min", false)) { app.createSplashScreen(networkStyle.data()); } RPCServer rpcServer; HTTPRPCRequestProcessor httpRPCRequestProcessor(config, rpcServer); try { app.createWindow(&config, networkStyle.data()); // Perform base initialization before spinning up // initialization/shutdown thread. This is acceptable because this // function only contains steps that are quick to execute, so the GUI // thread won't be held up. if (!BitcoinABC::baseInitialize(config, rpcServer)) { // A dialog with detailed error will have been shown by InitError() return EXIT_FAILURE; } app.requestInitialize(config, httpRPCRequestProcessor, rpcServer); #if defined(Q_OS_WIN) WinShutdownMonitor::registerShutdownBlockReason( QObject::tr("%1 didn't yet exit safely...") .arg(QObject::tr(PACKAGE_NAME)), (HWND)app.getMainWinId()); #endif app.exec(); app.requestShutdown(config); app.exec(); return app.getReturnValue(); } catch (const std::exception &e) { PrintExceptionContinue(&e, "Runaway exception"); app.handleRunawayException(QString::fromStdString(GetWarnings("gui"))); } catch (...) { PrintExceptionContinue(nullptr, "Runaway exception"); app.handleRunawayException(QString::fromStdString(GetWarnings("gui"))); } return EXIT_FAILURE; } #endif // BITCOIN_QT_TEST