diff --git a/src/qt/addressbookpage.cpp b/src/qt/addressbookpage.cpp index b4c71da3c..0e11a2e3a 100644 --- a/src/qt/addressbookpage.cpp +++ b/src/qt/addressbookpage.cpp @@ -1,302 +1,302 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #if defined(HAVE_CONFIG_H) -#include "config/bitcoin-config.h" +#include #endif -#include "addressbookpage.h" -#include "ui_addressbookpage.h" +#include +#include -#include "addresstablemodel.h" -#include "bitcoingui.h" -#include "csvmodelwriter.h" -#include "editaddressdialog.h" -#include "guiutil.h" -#include "platformstyle.h" +#include +#include +#include +#include +#include +#include #include #include #include #include AddressBookPage::AddressBookPage(const PlatformStyle *platformStyle, Mode _mode, Tabs _tab, QWidget *parent) : QDialog(parent), ui(new Ui::AddressBookPage), model(0), mode(_mode), tab(_tab) { ui->setupUi(this); if (!platformStyle->getImagesOnButtons()) { ui->newAddress->setIcon(QIcon()); ui->copyAddress->setIcon(QIcon()); ui->deleteAddress->setIcon(QIcon()); ui->exportButton->setIcon(QIcon()); } else { ui->newAddress->setIcon(platformStyle->SingleColorIcon(":/icons/add")); ui->copyAddress->setIcon( platformStyle->SingleColorIcon(":/icons/editcopy")); ui->deleteAddress->setIcon( platformStyle->SingleColorIcon(":/icons/remove")); ui->exportButton->setIcon( platformStyle->SingleColorIcon(":/icons/export")); } switch (mode) { case ForSelection: switch (tab) { case SendingTab: setWindowTitle(tr("Choose the address to send coins to")); break; case ReceivingTab: setWindowTitle( tr("Choose the address to receive coins with")); break; } connect(ui->tableView, SIGNAL(doubleClicked(QModelIndex)), this, SLOT(accept())); ui->tableView->setEditTriggers(QAbstractItemView::NoEditTriggers); ui->tableView->setFocus(); ui->closeButton->setText(tr("C&hoose")); ui->exportButton->hide(); break; case ForEditing: switch (tab) { case SendingTab: setWindowTitle(tr("Sending addresses")); break; case ReceivingTab: setWindowTitle(tr("Receiving addresses")); break; } break; } switch (tab) { case SendingTab: ui->labelExplanation->setText( tr("These are your Bitcoin addresses for sending payments. " "Always check the amount and the receiving address before " "sending coins.")); ui->deleteAddress->setVisible(true); break; case ReceivingTab: ui->labelExplanation->setText( tr("These are your Bitcoin addresses for receiving payments. " "It is recommended to use a new receiving address for each " "transaction.")); ui->deleteAddress->setVisible(false); break; } // Context menu actions QAction *copyAddressAction = new QAction(tr("&Copy Address"), this); QAction *copyLabelAction = new QAction(tr("Copy &Label"), this); QAction *editAction = new QAction(tr("&Edit"), this); deleteAction = new QAction(ui->deleteAddress->text(), this); // Build context menu contextMenu = new QMenu(this); contextMenu->addAction(copyAddressAction); contextMenu->addAction(copyLabelAction); contextMenu->addAction(editAction); if (tab == SendingTab) contextMenu->addAction(deleteAction); contextMenu->addSeparator(); // Connect signals for context menu actions connect(copyAddressAction, SIGNAL(triggered()), this, SLOT(on_copyAddress_clicked())); connect(copyLabelAction, SIGNAL(triggered()), this, SLOT(onCopyLabelAction())); connect(editAction, SIGNAL(triggered()), this, SLOT(onEditAction())); connect(deleteAction, SIGNAL(triggered()), this, SLOT(on_deleteAddress_clicked())); connect(ui->tableView, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(contextualMenu(QPoint))); connect(ui->closeButton, SIGNAL(clicked()), this, SLOT(accept())); } AddressBookPage::~AddressBookPage() { delete ui; } void AddressBookPage::setModel(AddressTableModel *_model) { this->model = _model; if (!_model) return; proxyModel = new QSortFilterProxyModel(this); proxyModel->setSourceModel(_model); proxyModel->setDynamicSortFilter(true); proxyModel->setSortCaseSensitivity(Qt::CaseInsensitive); proxyModel->setFilterCaseSensitivity(Qt::CaseInsensitive); switch (tab) { case ReceivingTab: // Receive filter proxyModel->setFilterRole(AddressTableModel::TypeRole); proxyModel->setFilterFixedString(AddressTableModel::Receive); break; case SendingTab: // Send filter proxyModel->setFilterRole(AddressTableModel::TypeRole); proxyModel->setFilterFixedString(AddressTableModel::Send); break; } ui->tableView->setModel(proxyModel); ui->tableView->sortByColumn(0, Qt::AscendingOrder); // Set column widths ui->tableView->horizontalHeader()->setSectionResizeMode( AddressTableModel::Label, QHeaderView::Stretch); ui->tableView->horizontalHeader()->setSectionResizeMode( AddressTableModel::Address, QHeaderView::ResizeToContents); connect(ui->tableView->selectionModel(), SIGNAL(selectionChanged(QItemSelection, QItemSelection)), this, SLOT(selectionChanged())); // Select row for newly created address connect(_model, SIGNAL(rowsInserted(QModelIndex, int, int)), this, SLOT(selectNewAddress(QModelIndex, int, int))); selectionChanged(); } void AddressBookPage::on_copyAddress_clicked() { GUIUtil::copyEntryData(ui->tableView, AddressTableModel::Address); } void AddressBookPage::onCopyLabelAction() { GUIUtil::copyEntryData(ui->tableView, AddressTableModel::Label); } void AddressBookPage::onEditAction() { if (!model) return; if (!ui->tableView->selectionModel()) return; QModelIndexList indexes = ui->tableView->selectionModel()->selectedRows(); if (indexes.isEmpty()) return; EditAddressDialog dlg(tab == SendingTab ? EditAddressDialog::EditSendingAddress : EditAddressDialog::EditReceivingAddress, this); dlg.setModel(model); QModelIndex origIndex = proxyModel->mapToSource(indexes.at(0)); dlg.loadRow(origIndex.row()); dlg.exec(); } void AddressBookPage::on_newAddress_clicked() { if (!model) return; EditAddressDialog dlg(tab == SendingTab ? EditAddressDialog::NewSendingAddress : EditAddressDialog::NewReceivingAddress, this); dlg.setModel(model); if (dlg.exec()) { newAddressToSelect = dlg.getAddress(); } } void AddressBookPage::on_deleteAddress_clicked() { QTableView *table = ui->tableView; if (!table->selectionModel()) return; QModelIndexList indexes = table->selectionModel()->selectedRows(); if (!indexes.isEmpty()) { table->model()->removeRow(indexes.at(0).row()); } } void AddressBookPage::selectionChanged() { // Set button states based on selected tab and selection QTableView *table = ui->tableView; if (!table->selectionModel()) return; if (table->selectionModel()->hasSelection()) { switch (tab) { case SendingTab: // In sending tab, allow deletion of selection ui->deleteAddress->setEnabled(true); ui->deleteAddress->setVisible(true); deleteAction->setEnabled(true); break; case ReceivingTab: // Deleting receiving addresses, however, is not allowed ui->deleteAddress->setEnabled(false); ui->deleteAddress->setVisible(false); deleteAction->setEnabled(false); break; } ui->copyAddress->setEnabled(true); } else { ui->deleteAddress->setEnabled(false); ui->copyAddress->setEnabled(false); } } void AddressBookPage::done(int retval) { QTableView *table = ui->tableView; if (!table->selectionModel() || !table->model()) return; // Figure out which address was selected, and return it QModelIndexList indexes = table->selectionModel()->selectedRows(AddressTableModel::Address); for (const QModelIndex &index : indexes) { QVariant address = table->model()->data(index); returnValue = address.toString(); } if (returnValue.isEmpty()) { // If no address entry selected, return rejected retval = Rejected; } QDialog::done(retval); } void AddressBookPage::on_exportButton_clicked() { // CSV is currently the only supported format QString filename = GUIUtil::getSaveFileName(this, tr("Export Address List"), QString(), tr("Comma separated file (*.csv)"), nullptr); if (filename.isNull()) return; CSVModelWriter writer(filename); // name, column, role writer.setModel(proxyModel); writer.addColumn("Label", AddressTableModel::Label, Qt::EditRole); writer.addColumn("Address", AddressTableModel::Address, Qt::EditRole); if (!writer.write()) { QMessageBox::critical(this, tr("Exporting Failed"), tr("There was an error trying to save the " "address list to %1. Please try again.") .arg(filename)); } } void AddressBookPage::contextualMenu(const QPoint &point) { QModelIndex index = ui->tableView->indexAt(point); if (index.isValid()) { contextMenu->exec(QCursor::pos()); } } void AddressBookPage::selectNewAddress(const QModelIndex &parent, int begin, int /*end*/) { QModelIndex idx = proxyModel->mapFromSource( model->index(begin, AddressTableModel::Address, parent)); if (idx.isValid() && (idx.data(Qt::EditRole).toString() == newAddressToSelect)) { // Select row of newly created address, once ui->tableView->setFocus(); ui->tableView->selectRow(idx.row()); newAddressToSelect.clear(); } } diff --git a/src/qt/coincontroltreewidget.cpp b/src/qt/coincontroltreewidget.cpp index e479b2286..472374fdc 100644 --- a/src/qt/coincontroltreewidget.cpp +++ b/src/qt/coincontroltreewidget.cpp @@ -1,31 +1,32 @@ // Copyright (c) 2011-2015 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "coincontroltreewidget.h" -#include "coincontroldialog.h" +#include + +#include CoinControlTreeWidget::CoinControlTreeWidget(QWidget *parent) : QTreeWidget(parent) {} void CoinControlTreeWidget::keyPressEvent(QKeyEvent *event) { if (event->key() == Qt::Key_Space) // press spacebar -> select checkbox { event->ignore(); int COLUMN_CHECKBOX = 0; if (this->currentItem()) this->currentItem()->setCheckState( COLUMN_CHECKBOX, ((this->currentItem()->checkState( COLUMN_CHECKBOX) == Qt::Checked) ? Qt::Unchecked : Qt::Checked)); } else if (event->key() == Qt::Key_Escape) // press esc -> close dialog { event->ignore(); CoinControlDialog *coinControlDialog = static_cast(this->parentWidget()); coinControlDialog->done(QDialog::Accepted); } else { this->QTreeWidget::keyPressEvent(event); } } diff --git a/src/qt/qvalidatedlineedit.cpp b/src/qt/qvalidatedlineedit.cpp index b00d9d6a4..3fa243d87 100644 --- a/src/qt/qvalidatedlineedit.cpp +++ b/src/qt/qvalidatedlineedit.cpp @@ -1,99 +1,99 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "qvalidatedlineedit.h" +#include -#include "bitcoinaddressvalidator.h" -#include "guiconstants.h" +#include +#include QValidatedLineEdit::QValidatedLineEdit(QWidget *parent) : QLineEdit(parent), valid(true), checkValidator(0) { connect(this, SIGNAL(textChanged(QString)), this, SLOT(markValid())); } void QValidatedLineEdit::setValid(bool _valid) { if (_valid == this->valid) { return; } if (_valid) { setStyleSheet(""); } else { setStyleSheet(STYLE_INVALID); } this->valid = _valid; } void QValidatedLineEdit::focusInEvent(QFocusEvent *evt) { // Clear invalid flag on focus setValid(true); QLineEdit::focusInEvent(evt); } void QValidatedLineEdit::focusOutEvent(QFocusEvent *evt) { checkValidity(); QLineEdit::focusOutEvent(evt); } void QValidatedLineEdit::markValid() { // As long as a user is typing ensure we display state as valid setValid(true); } void QValidatedLineEdit::clear() { setValid(true); QLineEdit::clear(); } void QValidatedLineEdit::setEnabled(bool enabled) { if (!enabled) { // A disabled QValidatedLineEdit should be marked valid setValid(true); } else { // Recheck validity when QValidatedLineEdit gets enabled checkValidity(); } QLineEdit::setEnabled(enabled); } void QValidatedLineEdit::checkValidity() { if (text().isEmpty()) { setValid(true); } else if (hasAcceptableInput()) { setValid(true); // Check contents on focus out if (checkValidator) { QString address = text(); int pos = 0; if (checkValidator->validate(address, pos) == QValidator::Acceptable) setValid(true); else setValid(false); } } else setValid(false); Q_EMIT validationDidChange(this); } void QValidatedLineEdit::setCheckValidator(const QValidator *v) { checkValidator = v; } bool QValidatedLineEdit::isValid() { // use checkValidator in case the QValidatedLineEdit is disabled if (checkValidator) { QString address = text(); int pos = 0; if (checkValidator->validate(address, pos) == QValidator::Acceptable) return true; } return valid; } diff --git a/src/qt/qvaluecombobox.cpp b/src/qt/qvaluecombobox.cpp index 2202812fa..1e8d63634 100644 --- a/src/qt/qvaluecombobox.cpp +++ b/src/qt/qvaluecombobox.cpp @@ -1,27 +1,27 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "qvaluecombobox.h" +#include QValueComboBox::QValueComboBox(QWidget *parent) : QComboBox(parent), role(Qt::UserRole) { connect(this, SIGNAL(currentIndexChanged(int)), this, SLOT(handleSelectionChanged(int))); } QVariant QValueComboBox::value() const { return itemData(currentIndex(), role); } void QValueComboBox::setValue(const QVariant &value) { setCurrentIndex(findData(value, role)); } void QValueComboBox::setRole(int _role) { this->role = _role; } void QValueComboBox::handleSelectionChanged(int idx) { Q_EMIT valueChanged(); } diff --git a/src/qt/rpcconsole.cpp b/src/qt/rpcconsole.cpp index a0828d476..e664b5091 100644 --- a/src/qt/rpcconsole.cpp +++ b/src/qt/rpcconsole.cpp @@ -1,1436 +1,1435 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #if defined(HAVE_CONFIG_H) -#include "config/bitcoin-config.h" +#include #endif -#include "rpcconsole.h" -#include "ui_debugwindow.h" - -#include "qt/bantablemodel.h" -#include "qt/clientmodel.h" -#include "qt/guiutil.h" -#include "qt/platformstyle.h" -#include "qt/walletmodel.h" - -#include "chainparams.h" -#include "config.h" -#include "interfaces/node.h" -#include "netbase.h" -#include "rpc/client.h" -#include "rpc/server.h" -#include "util.h" - -#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #ifdef ENABLE_WALLET -#include "wallet/wallet.h" +#include #include #endif #include #include #include #include #include #include #include #include #include #include #include +#include + // TODO: add a scrollback limit, as there is currently none // TODO: make it possible to filter out categories (esp debug messages when // implemented) // TODO: receive errors and debug messages through ClientModel const int CONSOLE_HISTORY = 50; const int INITIAL_TRAFFIC_GRAPH_MINS = 30; const QSize FONT_RANGE(4, 40); const char fontSizeSettingsKey[] = "consoleFontSize"; const struct { const char *url; const char *source; } ICON_MAPPING[] = {{"cmd-request", ":/icons/tx_input"}, {"cmd-reply", ":/icons/tx_output"}, {"cmd-error", ":/icons/tx_output"}, {"misc", ":/icons/tx_inout"}, {nullptr, nullptr}}; namespace { // don't add private key handling cmd's to the history const QStringList historyFilter = QStringList() << "importprivkey" << "importmulti" << "signmessagewithprivkey" << "signrawtransaction" << "signrawtransactionwithkey" << "walletpassphrase" << "walletpassphrasechange" << "encryptwallet"; } // namespace /* Object for executing console RPC commands in a separate thread. */ class RPCExecutor : public QObject { Q_OBJECT public: RPCExecutor(interfaces::Node &node) : m_node(node) {} public Q_SLOTS: void request(const QString &command, const QString &walletID); Q_SIGNALS: void reply(int category, const QString &command); private: interfaces::Node &m_node; }; /** Class for handling RPC timers * (used for e.g. re-locking the wallet after a timeout) */ class QtRPCTimerBase : public QObject, public RPCTimerBase { Q_OBJECT public: QtRPCTimerBase(std::function &_func, int64_t millis) : func(_func) { timer.setSingleShot(true); connect(&timer, SIGNAL(timeout()), this, SLOT(timeout())); timer.start(millis); } ~QtRPCTimerBase() {} private Q_SLOTS: void timeout() { func(); } private: QTimer timer; std::function func; }; class QtRPCTimerInterface : public RPCTimerInterface { public: ~QtRPCTimerInterface() {} const char *Name() override { return "Qt"; } RPCTimerBase *NewTimer(std::function &func, int64_t millis) override { return new QtRPCTimerBase(func, millis); } }; #include "rpcconsole.moc" /** * Split shell command line into a list of arguments and optionally execute the * command(s). * Aims to emulate \c bash and friends. * * - Command nesting is possible with parenthesis; for example: * validateaddress(getnewaddress()) * - Arguments are delimited with whitespace or comma * - Extra whitespace at the beginning and end and between arguments will be * ignored * - Text can be "double" or 'single' quoted * - The backslash \c \ is used as escape character * - Outside quotes, any character can be escaped * - Within double quotes, only escape \c " and backslashes before a \c " or * another backslash * - Within single quotes, no escaping is possible and no special * interpretation takes place * * @param[in] node optional node to execute command on * @param[out] result stringified Result from the executed command(chain) * @param[in] strCommand Command line to split * @param[in] fExecute set true if you want the command to be executed * @param[out] pstrFilteredOut Command line, filtered to remove any sensitive * data */ bool RPCConsole::RPCParseCommandLine(interfaces::Node *node, std::string &strResult, const std::string &strCommand, const bool fExecute, std::string *const pstrFilteredOut, const std::string *walletID) { std::vector> stack; stack.push_back(std::vector()); enum CmdParseState { STATE_EATING_SPACES, STATE_EATING_SPACES_IN_ARG, STATE_EATING_SPACES_IN_BRACKETS, STATE_ARGUMENT, STATE_SINGLEQUOTED, STATE_DOUBLEQUOTED, STATE_ESCAPE_OUTER, STATE_ESCAPE_DOUBLEQUOTED, STATE_COMMAND_EXECUTED, STATE_COMMAND_EXECUTED_INNER } state = STATE_EATING_SPACES; std::string curarg; UniValue lastResult; unsigned nDepthInsideSensitive = 0; size_t filter_begin_pos = 0, chpos; std::vector> filter_ranges; auto add_to_current_stack = [&](const std::string &strArg) { if (stack.back().empty() && (!nDepthInsideSensitive) && historyFilter.contains(QString::fromStdString(strArg), Qt::CaseInsensitive)) { nDepthInsideSensitive = 1; filter_begin_pos = chpos; } // Make sure stack is not empty before adding something if (stack.empty()) { stack.push_back(std::vector()); } stack.back().push_back(strArg); }; auto close_out_params = [&]() { if (nDepthInsideSensitive) { if (!--nDepthInsideSensitive) { assert(filter_begin_pos); filter_ranges.push_back( std::make_pair(filter_begin_pos, chpos)); filter_begin_pos = 0; } } stack.pop_back(); }; std::string strCommandTerminated = strCommand; if (strCommandTerminated.back() != '\n') strCommandTerminated += "\n"; for (chpos = 0; chpos < strCommandTerminated.size(); ++chpos) { char ch = strCommandTerminated[chpos]; switch (state) { case STATE_COMMAND_EXECUTED_INNER: case STATE_COMMAND_EXECUTED: { bool breakParsing = true; switch (ch) { case '[': curarg.clear(); state = STATE_COMMAND_EXECUTED_INNER; break; default: if (state == STATE_COMMAND_EXECUTED_INNER) { if (ch != ']') { // append char to the current argument (which is // also used for the query command) curarg += ch; break; } if (curarg.size() && fExecute) { // if we have a value query, query arrays with // index and objects with a string key UniValue subelement; if (lastResult.isArray()) { for (char argch : curarg) { if (!std::isdigit(argch)) { throw std::runtime_error( "Invalid result query"); } } subelement = lastResult[atoi(curarg.c_str())]; } else if (lastResult.isObject()) { subelement = find_value(lastResult, curarg); } else { // no array or object: abort throw std::runtime_error( "Invalid result query"); } lastResult = subelement; } state = STATE_COMMAND_EXECUTED; break; } // don't break parsing when the char is required for the // next argument breakParsing = false; // pop the stack and return the result to the current // command arguments close_out_params(); // don't stringify the json in case of a string to avoid // doublequotes if (lastResult.isStr()) { curarg = lastResult.get_str(); } else { curarg = lastResult.write(2); } // if we have a non empty result, use it as stack // argument otherwise as general result if (curarg.size()) { if (stack.size()) { add_to_current_stack(curarg); } else { strResult = curarg; } } curarg.clear(); // assume eating space state state = STATE_EATING_SPACES; } if (breakParsing) { break; } } // FALLTHROUGH case STATE_ARGUMENT: // In or after argument case STATE_EATING_SPACES_IN_ARG: case STATE_EATING_SPACES_IN_BRACKETS: case STATE_EATING_SPACES: // Handle runs of whitespace switch (ch) { case '"': state = STATE_DOUBLEQUOTED; break; case '\'': state = STATE_SINGLEQUOTED; break; case '\\': state = STATE_ESCAPE_OUTER; break; case '(': case ')': case '\n': if (state == STATE_EATING_SPACES_IN_ARG) { throw std::runtime_error("Invalid Syntax"); } if (state == STATE_ARGUMENT) { if (ch == '(' && stack.size() && stack.back().size() > 0) { if (nDepthInsideSensitive) { ++nDepthInsideSensitive; } stack.push_back(std::vector()); } // don't allow commands after executed commands on // baselevel if (!stack.size()) { throw std::runtime_error("Invalid Syntax"); } add_to_current_stack(curarg); curarg.clear(); state = STATE_EATING_SPACES_IN_BRACKETS; } if ((ch == ')' || ch == '\n') && stack.size() > 0) { if (fExecute) { // Convert argument list to JSON objects in // method-dependent way, and pass it along with // the method name to the dispatcher. UniValue params = RPCConvertValues( stack.back()[0], std::vector( stack.back().begin() + 1, stack.back().end())); std::string method = stack.back()[0]; std::string uri; #ifdef ENABLE_WALLET if (walletID && !walletID->empty()) { QByteArray encodedName = QUrl::toPercentEncoding( QString::fromStdString(*walletID)); uri = "/wallet/" + std::string(encodedName.constData(), encodedName.length()); } #endif GlobalConfig config; assert(node); lastResult = node->executeRpc(config, method, params, uri); } state = STATE_COMMAND_EXECUTED; curarg.clear(); } break; case ' ': case ',': case '\t': if (state == STATE_EATING_SPACES_IN_ARG && curarg.empty() && ch == ',') { throw std::runtime_error("Invalid Syntax"); } else if (state == STATE_ARGUMENT) { // Space ends argument add_to_current_stack(curarg); curarg.clear(); } if ((state == STATE_EATING_SPACES_IN_BRACKETS || state == STATE_ARGUMENT) && ch == ',') { state = STATE_EATING_SPACES_IN_ARG; break; } state = STATE_EATING_SPACES; break; default: curarg += ch; state = STATE_ARGUMENT; } break; case STATE_SINGLEQUOTED: // Single-quoted string switch (ch) { case '\'': state = STATE_ARGUMENT; break; default: curarg += ch; } break; case STATE_DOUBLEQUOTED: // Double-quoted string switch (ch) { case '"': state = STATE_ARGUMENT; break; case '\\': state = STATE_ESCAPE_DOUBLEQUOTED; break; default: curarg += ch; } break; case STATE_ESCAPE_OUTER: // '\' outside quotes curarg += ch; state = STATE_ARGUMENT; break; case STATE_ESCAPE_DOUBLEQUOTED: // '\' in double-quoted text if (ch != '"' && ch != '\\') { // keep '\' for everything but the quote and '\' itself curarg += '\\'; } curarg += ch; state = STATE_DOUBLEQUOTED; break; } } if (pstrFilteredOut) { if (STATE_COMMAND_EXECUTED == state) { assert(!stack.empty()); close_out_params(); } *pstrFilteredOut = strCommand; for (auto i = filter_ranges.rbegin(); i != filter_ranges.rend(); ++i) { pstrFilteredOut->replace(i->first, i->second - i->first, "(…)"); } } // final state switch (state) { case STATE_COMMAND_EXECUTED: if (lastResult.isStr()) { strResult = lastResult.get_str(); } else { strResult = lastResult.write(2); } // FALLTHROUGH case STATE_ARGUMENT: case STATE_EATING_SPACES: return true; default: // ERROR to end in one of the other states return false; } } void RPCExecutor::request(const QString &command, const QString &walletID) { try { std::string result; std::string executableCommand = command.toStdString() + "\n"; // Catch the console-only-help command before RPC call is executed and // reply with help text as-if a RPC reply. if (executableCommand == "help-console\n") { Q_EMIT reply( RPCConsole::CMD_REPLY, QString(("\n" "This console accepts RPC commands using the standard " "syntax.\n" " example: getblockhash 0\n\n" "This console can also accept RPC commands using " "parenthesized syntax.\n" " example: getblockhash(0)\n\n" "Commands may be nested when specified with the " "parenthesized syntax.\n" " example: getblock(getblockhash(0) 1)\n\n" "A space or a comma can be used to delimit arguments " "for either syntax.\n" " example: getblockhash 0\n" " getblockhash,0\n\n" "Named results can be queried with a non-quoted key " "string in brackets.\n" " example: getblock(getblockhash(0) true)[tx]\n\n" "Results without keys can be queried using an integer " "in brackets.\n" " example: " "getblock(getblockhash(0),true)[tx][0]\n\n"))); return; } std::string wallet_id = walletID.toStdString(); if (!RPCConsole::RPCExecuteCommandLine( m_node, result, executableCommand, nullptr, &wallet_id)) { Q_EMIT reply(RPCConsole::CMD_ERROR, QString("Parse error: unbalanced ' or \"")); return; } Q_EMIT reply(RPCConsole::CMD_REPLY, QString::fromStdString(result)); } catch (UniValue &objError) { // Nice formatting for standard-format error try { int code = find_value(objError, "code").get_int(); std::string message = find_value(objError, "message").get_str(); Q_EMIT reply(RPCConsole::CMD_ERROR, QString::fromStdString(message) + " (code " + QString::number(code) + ")"); } catch (const std::runtime_error &) { // raised when converting to invalid type, i.e. missing code or // message. Show raw JSON object. Q_EMIT reply(RPCConsole::CMD_ERROR, QString::fromStdString(objError.write())); } } catch (const std::exception &e) { Q_EMIT reply(RPCConsole::CMD_ERROR, QString("Error: ") + QString::fromStdString(e.what())); } } RPCConsole::RPCConsole(interfaces::Node &node, const PlatformStyle *_platformStyle, QWidget *parent) : QWidget(parent), m_node(node), ui(new Ui::RPCConsole), clientModel(0), historyPtr(0), platformStyle(_platformStyle), peersTableContextMenu(0), banTableContextMenu(0), consoleFontSize(0) { ui->setupUi(this); QSettings settings; if (!restoreGeometry( settings.value("RPCConsoleWindowGeometry").toByteArray())) { // Restore failed (perhaps missing setting), center the window move(QApplication::desktop()->availableGeometry().center() - frameGeometry().center()); } ui->openDebugLogfileButton->setToolTip( ui->openDebugLogfileButton->toolTip().arg(tr(PACKAGE_NAME))); if (platformStyle->getImagesOnButtons()) { ui->openDebugLogfileButton->setIcon( platformStyle->SingleColorIcon(":/icons/export")); } ui->clearButton->setIcon(platformStyle->SingleColorIcon(":/icons/remove")); ui->fontBiggerButton->setIcon( platformStyle->SingleColorIcon(":/icons/fontbigger")); ui->fontSmallerButton->setIcon( platformStyle->SingleColorIcon(":/icons/fontsmaller")); // Install event filter for up and down arrow ui->lineEdit->installEventFilter(this); ui->messagesWidget->installEventFilter(this); connect(ui->clearButton, SIGNAL(clicked()), this, SLOT(clear())); connect(ui->fontBiggerButton, SIGNAL(clicked()), this, SLOT(fontBigger())); connect(ui->fontSmallerButton, SIGNAL(clicked()), this, SLOT(fontSmaller())); connect(ui->btnClearTrafficGraph, SIGNAL(clicked()), ui->trafficGraph, SLOT(clear())); // disable the wallet selector by default ui->WalletSelector->setVisible(false); ui->WalletSelectorLabel->setVisible(false); // set library version labels #ifdef ENABLE_WALLET ui->berkeleyDBVersion->setText(DbEnv::version(0, 0, 0)); #else ui->label_berkeleyDBVersion->hide(); ui->berkeleyDBVersion->hide(); #endif // Register RPC timer interface rpcTimerInterface = new QtRPCTimerInterface(); // avoid accidentally overwriting an existing, non QTThread // based timer interface m_node.rpcSetTimerInterfaceIfUnset(rpcTimerInterface); setTrafficGraphRange(INITIAL_TRAFFIC_GRAPH_MINS); ui->detailWidget->hide(); ui->peerHeading->setText(tr("Select a peer to view detailed information.")); consoleFontSize = settings.value(fontSizeSettingsKey, QFontInfo(QFont()).pointSize()) .toInt(); clear(); } RPCConsole::~RPCConsole() { QSettings settings; settings.setValue("RPCConsoleWindowGeometry", saveGeometry()); m_node.rpcUnsetTimerInterface(rpcTimerInterface); delete rpcTimerInterface; delete ui; } bool RPCConsole::eventFilter(QObject *obj, QEvent *event) { // Special key handling if (event->type() == QEvent::KeyPress) { QKeyEvent *keyevt = static_cast(event); int key = keyevt->key(); Qt::KeyboardModifiers mod = keyevt->modifiers(); switch (key) { case Qt::Key_Up: if (obj == ui->lineEdit) { browseHistory(-1); return true; } break; case Qt::Key_Down: if (obj == ui->lineEdit) { browseHistory(1); return true; } break; case Qt::Key_PageUp: /* pass paging keys to messages widget */ case Qt::Key_PageDown: if (obj == ui->lineEdit) { QApplication::postEvent(ui->messagesWidget, new QKeyEvent(*keyevt)); return true; } break; case Qt::Key_Return: case Qt::Key_Enter: // forward these events to lineEdit if (obj == autoCompleter->popup()) { QApplication::postEvent(ui->lineEdit, new QKeyEvent(*keyevt)); return true; } break; default: // Typing in messages widget brings focus to line edit, and // redirects key there. Exclude most combinations and keys that // emit no text, except paste shortcuts. if (obj == ui->messagesWidget && ((!mod && !keyevt->text().isEmpty() && key != Qt::Key_Tab) || ((mod & Qt::ControlModifier) && key == Qt::Key_V) || ((mod & Qt::ShiftModifier) && key == Qt::Key_Insert))) { ui->lineEdit->setFocus(); QApplication::postEvent(ui->lineEdit, new QKeyEvent(*keyevt)); return true; } } } return QWidget::eventFilter(obj, event); } void RPCConsole::setClientModel(ClientModel *model) { clientModel = model; ui->trafficGraph->setClientModel(model); if (model && clientModel->getPeerTableModel() && clientModel->getBanTableModel()) { // Keep up to date with client setNumConnections(model->getNumConnections()); connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int))); interfaces::Node &node = clientModel->node(); setNumBlocks(node.getNumBlocks(), QDateTime::fromTime_t(node.getLastBlockTime()), node.getVerificationProgress(), false); connect(model, SIGNAL(numBlocksChanged(int, QDateTime, double, bool)), this, SLOT(setNumBlocks(int, QDateTime, double, bool))); updateNetworkState(); connect(model, SIGNAL(networkActiveChanged(bool)), this, SLOT(setNetworkActive(bool))); updateTrafficStats(node.getTotalBytesRecv(), node.getTotalBytesSent()); connect(model, SIGNAL(bytesChanged(quint64, quint64)), this, SLOT(updateTrafficStats(quint64, quint64))); connect(model, SIGNAL(mempoolSizeChanged(long, size_t)), this, SLOT(setMempoolSize(long, size_t))); // set up peer table ui->peerWidget->setModel(model->getPeerTableModel()); ui->peerWidget->verticalHeader()->hide(); ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers); ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows); ui->peerWidget->setSelectionMode(QAbstractItemView::ExtendedSelection); ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu); ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH); ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH); ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH); ui->peerWidget->horizontalHeader()->setStretchLastSection(true); // create peer table context menu actions QAction *disconnectAction = new QAction(tr("&Disconnect"), this); QAction *banAction1h = new QAction(tr("Ban for") + " " + tr("1 &hour"), this); QAction *banAction24h = new QAction(tr("Ban for") + " " + tr("1 &day"), this); QAction *banAction7d = new QAction(tr("Ban for") + " " + tr("1 &week"), this); QAction *banAction365d = new QAction(tr("Ban for") + " " + tr("1 &year"), this); // create peer table context menu peersTableContextMenu = new QMenu(this); peersTableContextMenu->addAction(disconnectAction); peersTableContextMenu->addAction(banAction1h); peersTableContextMenu->addAction(banAction24h); peersTableContextMenu->addAction(banAction7d); peersTableContextMenu->addAction(banAction365d); // Add a signal mapping to allow dynamic context menu arguments. We need // to use int (instead of int64_t), because signal mapper only supports // int or objects, which is okay because max bantime (1 year) is < // int_max. QSignalMapper *signalMapper = new QSignalMapper(this); signalMapper->setMapping(banAction1h, 60 * 60); signalMapper->setMapping(banAction24h, 60 * 60 * 24); signalMapper->setMapping(banAction7d, 60 * 60 * 24 * 7); signalMapper->setMapping(banAction365d, 60 * 60 * 24 * 365); connect(banAction1h, SIGNAL(triggered()), signalMapper, SLOT(map())); connect(banAction24h, SIGNAL(triggered()), signalMapper, SLOT(map())); connect(banAction7d, SIGNAL(triggered()), signalMapper, SLOT(map())); connect(banAction365d, SIGNAL(triggered()), signalMapper, SLOT(map())); connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(banSelectedNode(int))); // peer table context menu signals connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint &)), this, SLOT(showPeersTableContextMenu(const QPoint &))); connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode())); // peer table signal handling - update peer details when selecting new // node connect( ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)), this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &))); // peer table signal handling - update peer details when new nodes are // added to the model connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged())); // peer table signal handling - cache selected node ids connect(model->getPeerTableModel(), SIGNAL(layoutAboutToBeChanged()), this, SLOT(peerLayoutAboutToChange())); // set up ban table ui->banlistWidget->setModel(model->getBanTableModel()); ui->banlistWidget->verticalHeader()->hide(); ui->banlistWidget->setEditTriggers(QAbstractItemView::NoEditTriggers); ui->banlistWidget->setSelectionBehavior(QAbstractItemView::SelectRows); ui->banlistWidget->setSelectionMode(QAbstractItemView::SingleSelection); ui->banlistWidget->setContextMenuPolicy(Qt::CustomContextMenu); ui->banlistWidget->setColumnWidth(BanTableModel::Address, BANSUBNET_COLUMN_WIDTH); ui->banlistWidget->setColumnWidth(BanTableModel::Bantime, BANTIME_COLUMN_WIDTH); ui->banlistWidget->horizontalHeader()->setStretchLastSection(true); // create ban table context menu action QAction *unbanAction = new QAction(tr("&Unban"), this); // create ban table context menu banTableContextMenu = new QMenu(this); banTableContextMenu->addAction(unbanAction); // ban table context menu signals connect(ui->banlistWidget, SIGNAL(customContextMenuRequested(const QPoint &)), this, SLOT(showBanTableContextMenu(const QPoint &))); connect(unbanAction, SIGNAL(triggered()), this, SLOT(unbanSelectedNode())); // ban table signal handling - clear peer details when clicking a peer // in the ban table connect(ui->banlistWidget, SIGNAL(clicked(const QModelIndex &)), this, SLOT(clearSelectedNode())); // ban table signal handling - ensure ban table is shown or hidden (if // empty) connect(model->getBanTableModel(), SIGNAL(layoutChanged()), this, SLOT(showOrHideBanTableIfRequired())); showOrHideBanTableIfRequired(); // Provide initial values ui->clientVersion->setText(model->formatFullVersion()); ui->clientUserAgent->setText(model->formatSubVersion()); ui->dataDir->setText(model->dataDir()); ui->startupTime->setText(model->formatClientStartupTime()); ui->networkName->setText( QString::fromStdString(Params().NetworkIDString())); // Setup autocomplete and attach it QStringList wordList; std::vector commandList = m_node.listRpcCommands(); for (size_t i = 0; i < commandList.size(); ++i) { wordList << commandList[i].c_str(); wordList << ("help " + commandList[i]).c_str(); } wordList << "help-console"; wordList.sort(); autoCompleter = new QCompleter(wordList, this); autoCompleter->setModelSorting(QCompleter::CaseSensitivelySortedModel); ui->lineEdit->setCompleter(autoCompleter); autoCompleter->popup()->installEventFilter(this); // Start thread to execute RPC commands. startExecutor(); } if (!model) { // Client model is being set to 0, this means shutdown() is about to be // called. Make sure we clean up the executor thread Q_EMIT stopExecutor(); thread.wait(); } } #ifdef ENABLE_WALLET void RPCConsole::addWallet(WalletModel *const walletModel) { const QString name = walletModel->getWalletName(); // use name for text and internal data object (to allow to move to a wallet // id later) ui->WalletSelector->addItem(name, name); if (ui->WalletSelector->count() == 2 && !isVisible()) { // First wallet added, set to default so long as the window isn't // presently visible (and potentially in use) ui->WalletSelector->setCurrentIndex(1); } if (ui->WalletSelector->count() > 2) { ui->WalletSelector->setVisible(true); ui->WalletSelectorLabel->setVisible(true); } } #endif static QString categoryClass(int category) { switch (category) { case RPCConsole::CMD_REQUEST: return "cmd-request"; break; case RPCConsole::CMD_REPLY: return "cmd-reply"; break; case RPCConsole::CMD_ERROR: return "cmd-error"; break; default: return "misc"; } } void RPCConsole::fontBigger() { setFontSize(consoleFontSize + 1); } void RPCConsole::fontSmaller() { setFontSize(consoleFontSize - 1); } void RPCConsole::setFontSize(int newSize) { QSettings settings; // don't allow a insane font size if (newSize < FONT_RANGE.width() || newSize > FONT_RANGE.height()) return; // temp. store the console content QString str = ui->messagesWidget->toHtml(); // replace font tags size in current content str.replace(QString("font-size:%1pt").arg(consoleFontSize), QString("font-size:%1pt").arg(newSize)); // store the new font size consoleFontSize = newSize; settings.setValue(fontSizeSettingsKey, consoleFontSize); // clear console (reset icon sizes, default stylesheet) and re-add the // content float oldPosFactor = 1.0 / ui->messagesWidget->verticalScrollBar()->maximum() * ui->messagesWidget->verticalScrollBar()->value(); clear(false); ui->messagesWidget->setHtml(str); ui->messagesWidget->verticalScrollBar()->setValue( oldPosFactor * ui->messagesWidget->verticalScrollBar()->maximum()); } void RPCConsole::clear(bool clearHistory) { ui->messagesWidget->clear(); if (clearHistory) { history.clear(); historyPtr = 0; } ui->lineEdit->clear(); ui->lineEdit->setFocus(); // Add smoothly scaled icon images. // (when using width/height on an img, Qt uses nearest instead of linear // interpolation) for (int i = 0; ICON_MAPPING[i].url; ++i) { ui->messagesWidget->document()->addResource( QTextDocument::ImageResource, QUrl(ICON_MAPPING[i].url), platformStyle->SingleColorImage(ICON_MAPPING[i].source) .scaled(QSize(consoleFontSize * 2, consoleFontSize * 2), Qt::IgnoreAspectRatio, Qt::SmoothTransformation)); } // Set default style sheet QFontInfo fixedFontInfo(GUIUtil::fixedPitchFont()); ui->messagesWidget->document()->setDefaultStyleSheet( QString("table { }" "td.time { color: #808080; font-size: %2; padding-top: 3px; } " "td.message { font-family: %1; font-size: %2; " "white-space:pre-wrap; } " "td.cmd-request { color: #006060; } " "td.cmd-error { color: red; } " ".secwarning { color: red; }" "b { color: #006060; } ") .arg(fixedFontInfo.family(), QString("%1pt").arg(consoleFontSize))); #ifdef Q_OS_MAC QString clsKey = "(⌘)-L"; #else QString clsKey = "Ctrl-L"; #endif message(CMD_REPLY, (tr("Welcome to the %1 RPC console.").arg(tr(PACKAGE_NAME)) + "
" + tr("Use up and down arrows to navigate history, and " "%1 to clear screen.") .arg("" + clsKey + "") + "
" + tr("Type %1 for an overview of available commands.") .arg("help") + "
" + tr("For more information on using this console type %1.") .arg("help-console") + "

" + tr("WARNING: Scammers have been active, telling users to type " "commands here, stealing their wallet contents. Do not use " "this console without fully understanding the ramification " "of a command.") + ""), true); } void RPCConsole::keyPressEvent(QKeyEvent *event) { if (windowType() != Qt::Widget && event->key() == Qt::Key_Escape) { close(); } } void RPCConsole::message(int category, const QString &message, bool html) { QTime time = QTime::currentTime(); QString timeString = time.toString(); QString out; out += ""; out += ""; out += "
" + timeString + ""; if (html) { out += message; } else { out += GUIUtil::HtmlEscape(message, false); } out += "
"; ui->messagesWidget->append(out); } void RPCConsole::updateNetworkState() { QString connections = QString::number(clientModel->getNumConnections()) + " ("; connections += tr("In:") + " " + QString::number(clientModel->getNumConnections(CONNECTIONS_IN)) + " / "; connections += tr("Out:") + " " + QString::number(clientModel->getNumConnections(CONNECTIONS_OUT)) + ")"; if (!clientModel->node().getNetworkActive()) { connections += " (" + tr("Network activity disabled") + ")"; } ui->numberOfConnections->setText(connections); } void RPCConsole::setNumConnections(int count) { if (!clientModel) { return; } updateNetworkState(); } void RPCConsole::setNetworkActive(bool networkActive) { updateNetworkState(); } void RPCConsole::setNumBlocks(int count, const QDateTime &blockDate, double nVerificationProgress, bool headers) { if (!headers) { ui->numberOfBlocks->setText(QString::number(count)); ui->lastBlockTime->setText(blockDate.toString()); } } void RPCConsole::setMempoolSize(long numberOfTxs, size_t dynUsage) { ui->mempoolNumberTxs->setText(QString::number(numberOfTxs)); if (dynUsage < 1000000) { ui->mempoolSize->setText(QString::number(dynUsage / 1000.0, 'f', 2) + " KB"); } else { ui->mempoolSize->setText(QString::number(dynUsage / 1000000.0, 'f', 2) + " MB"); } } void RPCConsole::on_lineEdit_returnPressed() { QString cmd = ui->lineEdit->text(); if (!cmd.isEmpty()) { std::string strFilteredCmd; try { std::string dummy; if (!RPCParseCommandLine(nullptr, dummy, cmd.toStdString(), false, &strFilteredCmd)) { // Failed to parse command, so we cannot even filter it for the // history throw std::runtime_error("Invalid command line"); } } catch (const std::exception &e) { QMessageBox::critical(this, "Error", QString("Error: ") + QString::fromStdString(e.what())); return; } ui->lineEdit->clear(); cmdBeforeBrowsing = QString(); QString walletID; #ifdef ENABLE_WALLET const int wallet_index = ui->WalletSelector->currentIndex(); if (wallet_index > 0) { walletID = (QString)ui->WalletSelector->itemData(wallet_index) .value(); } if (m_last_wallet_id != walletID) { if (walletID.isEmpty()) { message(CMD_REQUEST, tr("Executing command without any wallet")); } else { message( CMD_REQUEST, tr("Executing command using \"%1\" wallet").arg(walletID)); } m_last_wallet_id = walletID; } #endif message(CMD_REQUEST, QString::fromStdString(strFilteredCmd)); Q_EMIT cmdRequest(cmd, walletID); cmd = QString::fromStdString(strFilteredCmd); // Remove command, if already in history history.removeOne(cmd); // Append command to history history.append(cmd); // Enforce maximum history size while (history.size() > CONSOLE_HISTORY) history.removeFirst(); // Set pointer to end of history historyPtr = history.size(); // Scroll console view to end scrollToEnd(); } } void RPCConsole::browseHistory(int offset) { // store current text when start browsing through the history if (historyPtr == history.size()) { cmdBeforeBrowsing = ui->lineEdit->text(); } historyPtr += offset; if (historyPtr < 0) { historyPtr = 0; } if (historyPtr > history.size()) { historyPtr = history.size(); } QString cmd; if (historyPtr < history.size()) { cmd = history.at(historyPtr); } else if (!cmdBeforeBrowsing.isNull()) { cmd = cmdBeforeBrowsing; } ui->lineEdit->setText(cmd); } void RPCConsole::startExecutor() { RPCExecutor *executor = new RPCExecutor(m_node); executor->moveToThread(&thread); // Replies from executor object must go to this object connect(executor, SIGNAL(reply(int, QString)), this, SLOT(message(int, QString))); // Requests from this object must go to executor connect(this, SIGNAL(cmdRequest(QString, QString)), executor, SLOT(request(QString, QString))); // On stopExecutor signal // - quit the Qt event loop in the execution thread connect(this, SIGNAL(stopExecutor()), &thread, SLOT(quit())); // - queue executor for deletion (in execution thread) connect(&thread, SIGNAL(finished()), executor, SLOT(deleteLater()), Qt::DirectConnection); // Default implementation of QThread::run() simply spins up an event loop in // the thread, which is what we want. thread.start(); } void RPCConsole::on_tabWidget_currentChanged(int index) { if (ui->tabWidget->widget(index) == ui->tab_console) { ui->lineEdit->setFocus(); } else if (ui->tabWidget->widget(index) != ui->tab_peers) { clearSelectedNode(); } } void RPCConsole::on_openDebugLogfileButton_clicked() { GUIUtil::openDebugLogfile(); } void RPCConsole::scrollToEnd() { QScrollBar *scrollbar = ui->messagesWidget->verticalScrollBar(); scrollbar->setValue(scrollbar->maximum()); } void RPCConsole::on_sldGraphRange_valueChanged(int value) { const int multiplier = 5; // each position on the slider represents 5 min int mins = value * multiplier; setTrafficGraphRange(mins); } void RPCConsole::setTrafficGraphRange(int mins) { ui->trafficGraph->setGraphRangeMins(mins); ui->lblGraphRange->setText(GUIUtil::formatDurationStr(mins * 60)); } void RPCConsole::updateTrafficStats(quint64 totalBytesIn, quint64 totalBytesOut) { ui->lblBytesIn->setText(GUIUtil::formatBytes(totalBytesIn)); ui->lblBytesOut->setText(GUIUtil::formatBytes(totalBytesOut)); } void RPCConsole::peerSelected(const QItemSelection &selected, const QItemSelection &deselected) { Q_UNUSED(deselected); if (!clientModel || !clientModel->getPeerTableModel() || selected.indexes().isEmpty()) return; const CNodeCombinedStats *stats = clientModel->getPeerTableModel()->getNodeStats( selected.indexes().first().row()); if (stats) updateNodeDetail(stats); } void RPCConsole::peerLayoutAboutToChange() { QModelIndexList selected = ui->peerWidget->selectionModel()->selectedIndexes(); cachedNodeids.clear(); for (int i = 0; i < selected.size(); i++) { const CNodeCombinedStats *stats = clientModel->getPeerTableModel()->getNodeStats( selected.at(i).row()); cachedNodeids.append(stats->nodeStats.nodeid); } } void RPCConsole::peerLayoutChanged() { if (!clientModel || !clientModel->getPeerTableModel()) { return; } const CNodeCombinedStats *stats = nullptr; bool fUnselect = false; bool fReselect = false; if (cachedNodeids.empty()) // no node selected yet return; // find the currently selected row int selectedRow = -1; QModelIndexList selectedModelIndex = ui->peerWidget->selectionModel()->selectedIndexes(); if (!selectedModelIndex.isEmpty()) { selectedRow = selectedModelIndex.first().row(); } // check if our detail node has a row in the table (it may not necessarily // be at selectedRow since its position can change after a layout change) int detailNodeRow = clientModel->getPeerTableModel()->getRowByNodeId(cachedNodeids.first()); if (detailNodeRow < 0) { // detail node disappeared from table (node disconnected) fUnselect = true; } else { if (detailNodeRow != selectedRow) { // detail node moved position fUnselect = true; fReselect = true; } // get fresh stats on the detail node. stats = clientModel->getPeerTableModel()->getNodeStats(detailNodeRow); } if (fUnselect && selectedRow >= 0) { clearSelectedNode(); } if (fReselect) { for (int i = 0; i < cachedNodeids.size(); i++) { ui->peerWidget->selectRow( clientModel->getPeerTableModel()->getRowByNodeId( cachedNodeids.at(i))); } } if (stats) updateNodeDetail(stats); } void RPCConsole::updateNodeDetail(const CNodeCombinedStats *stats) { // update the detail ui with latest node information QString peerAddrDetails(QString::fromStdString(stats->nodeStats.addrName) + " "); peerAddrDetails += tr("(node id: %1)").arg(QString::number(stats->nodeStats.nodeid)); if (!stats->nodeStats.addrLocal.empty()) { peerAddrDetails += "
" + tr("via %1").arg(QString::fromStdString( stats->nodeStats.addrLocal)); } ui->peerHeading->setText(peerAddrDetails); ui->peerServices->setText( GUIUtil::formatServicesStr(stats->nodeStats.nServices)); ui->peerLastSend->setText( stats->nodeStats.nLastSend ? GUIUtil::formatDurationStr(GetSystemTimeInSeconds() - stats->nodeStats.nLastSend) : tr("never")); ui->peerLastRecv->setText( stats->nodeStats.nLastRecv ? GUIUtil::formatDurationStr(GetSystemTimeInSeconds() - stats->nodeStats.nLastRecv) : tr("never")); ui->peerBytesSent->setText( GUIUtil::formatBytes(stats->nodeStats.nSendBytes)); ui->peerBytesRecv->setText( GUIUtil::formatBytes(stats->nodeStats.nRecvBytes)); ui->peerConnTime->setText(GUIUtil::formatDurationStr( GetSystemTimeInSeconds() - stats->nodeStats.nTimeConnected)); ui->peerPingTime->setText( GUIUtil::formatPingTime(stats->nodeStats.dPingTime)); ui->peerPingWait->setText( GUIUtil::formatPingTime(stats->nodeStats.dPingWait)); ui->peerMinPing->setText( GUIUtil::formatPingTime(stats->nodeStats.dMinPing)); ui->timeoffset->setText( GUIUtil::formatTimeOffset(stats->nodeStats.nTimeOffset)); ui->peerVersion->setText( QString("%1").arg(QString::number(stats->nodeStats.nVersion))); ui->peerSubversion->setText( QString::fromStdString(stats->nodeStats.cleanSubVer)); ui->peerDirection->setText(stats->nodeStats.fInbound ? tr("Inbound") : tr("Outbound")); ui->peerHeight->setText( QString("%1").arg(QString::number(stats->nodeStats.nStartingHeight))); ui->peerWhitelisted->setText(stats->nodeStats.fWhitelisted ? tr("Yes") : tr("No")); // This check fails for example if the lock was busy and // nodeStateStats couldn't be fetched. if (stats->fNodeStateStatsAvailable) { // Ban score is init to 0 ui->peerBanScore->setText( QString("%1").arg(stats->nodeStateStats.nMisbehavior)); // Sync height is init to -1 if (stats->nodeStateStats.nSyncHeight > -1) { ui->peerSyncHeight->setText( QString("%1").arg(stats->nodeStateStats.nSyncHeight)); } else { ui->peerSyncHeight->setText(tr("Unknown")); } // Common height is init to -1 if (stats->nodeStateStats.nCommonHeight > -1) { ui->peerCommonHeight->setText( QString("%1").arg(stats->nodeStateStats.nCommonHeight)); } else { ui->peerCommonHeight->setText(tr("Unknown")); } } ui->detailWidget->show(); } void RPCConsole::resizeEvent(QResizeEvent *event) { QWidget::resizeEvent(event); } void RPCConsole::showEvent(QShowEvent *event) { QWidget::showEvent(event); if (!clientModel || !clientModel->getPeerTableModel()) { return; } // start PeerTableModel auto refresh clientModel->getPeerTableModel()->startAutoRefresh(); } void RPCConsole::hideEvent(QHideEvent *event) { QWidget::hideEvent(event); if (!clientModel || !clientModel->getPeerTableModel()) { return; } // stop PeerTableModel auto refresh clientModel->getPeerTableModel()->stopAutoRefresh(); } void RPCConsole::showPeersTableContextMenu(const QPoint &point) { QModelIndex index = ui->peerWidget->indexAt(point); if (index.isValid()) peersTableContextMenu->exec(QCursor::pos()); } void RPCConsole::showBanTableContextMenu(const QPoint &point) { QModelIndex index = ui->banlistWidget->indexAt(point); if (index.isValid()) banTableContextMenu->exec(QCursor::pos()); } void RPCConsole::disconnectSelectedNode() { // Get selected peer addresses QList nodes = GUIUtil::getEntryData(ui->peerWidget, PeerTableModel::NetNodeId); for (int i = 0; i < nodes.count(); i++) { // Get currently selected peer address NodeId id = nodes.at(i).data().toLongLong(); // Find the node, disconnect it and clear the selected node if (m_node.disconnect(id)) { clearSelectedNode(); } } } void RPCConsole::banSelectedNode(int bantime) { if (!clientModel) { return; } // Get selected peer addresses QList nodes = GUIUtil::getEntryData(ui->peerWidget, PeerTableModel::NetNodeId); for (int i = 0; i < nodes.count(); i++) { // Get currently selected peer address NodeId id = nodes.at(i).data().toLongLong(); // Get currently selected peer address int detailNodeRow = clientModel->getPeerTableModel()->getRowByNodeId(id); if (detailNodeRow < 0) { return; } // Find possible nodes, ban it and clear the selected node const CNodeCombinedStats *stats = clientModel->getPeerTableModel()->getNodeStats(detailNodeRow); if (stats) { m_node.ban(stats->nodeStats.addr, BanReasonManuallyAdded, bantime); } } clearSelectedNode(); clientModel->getBanTableModel()->refresh(); } void RPCConsole::unbanSelectedNode() { if (!clientModel) { return; } // Get selected ban addresses QList nodes = GUIUtil::getEntryData(ui->banlistWidget, BanTableModel::Address); for (int i = 0; i < nodes.count(); i++) { // Get currently selected ban address QString strNode = nodes.at(i).data().toString(); CSubNet possibleSubnet; LookupSubNet(strNode.toStdString().c_str(), possibleSubnet); if (possibleSubnet.IsValid() && m_node.unban(possibleSubnet)) { clientModel->getBanTableModel()->refresh(); } } } void RPCConsole::clearSelectedNode() { ui->peerWidget->selectionModel()->clearSelection(); cachedNodeids.clear(); ui->detailWidget->hide(); ui->peerHeading->setText(tr("Select a peer to view detailed information.")); } void RPCConsole::showOrHideBanTableIfRequired() { if (!clientModel) { return; } bool visible = clientModel->getBanTableModel()->shouldShow(); ui->banlistWidget->setVisible(visible); ui->banHeading->setVisible(visible); } void RPCConsole::setTabFocus(enum TabTypes tabType) { ui->tabWidget->setCurrentIndex(tabType); } diff --git a/src/qt/trafficgraphwidget.cpp b/src/qt/trafficgraphwidget.cpp index b558812b5..df850ac87 100644 --- a/src/qt/trafficgraphwidget.cpp +++ b/src/qt/trafficgraphwidget.cpp @@ -1,165 +1,166 @@ // Copyright (c) 2011-2015 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "trafficgraphwidget.h" -#include "clientmodel.h" -#include "interfaces/node.h" +#include + +#include +#include #include #include #include #include #define DESIRED_SAMPLES 800 #define XMARGIN 10 #define YMARGIN 10 TrafficGraphWidget::TrafficGraphWidget(QWidget *parent) : QWidget(parent), timer(0), fMax(0.0f), nMins(0), vSamplesIn(), vSamplesOut(), nLastBytesIn(0), nLastBytesOut(0), clientModel(0) { timer = new QTimer(this); connect(timer, SIGNAL(timeout()), SLOT(updateRates())); } void TrafficGraphWidget::setClientModel(ClientModel *model) { clientModel = model; if (model) { nLastBytesIn = model->node().getTotalBytesRecv(); nLastBytesOut = model->node().getTotalBytesSent(); } } int TrafficGraphWidget::getGraphRangeMins() const { return nMins; } void TrafficGraphWidget::paintPath(QPainterPath &path, QQueue &samples) { int h = height() - YMARGIN * 2, w = width() - XMARGIN * 2; int sampleCount = samples.size(), x = XMARGIN + w, y; if (sampleCount > 0) { path.moveTo(x, YMARGIN + h); for (int i = 0; i < sampleCount; ++i) { x = XMARGIN + w - w * i / DESIRED_SAMPLES; y = YMARGIN + h - (int)(h * samples.at(i) / fMax); path.lineTo(x, y); } path.lineTo(x, YMARGIN + h); } } void TrafficGraphWidget::paintEvent(QPaintEvent *) { QPainter painter(this); painter.fillRect(rect(), Qt::black); if (fMax <= 0.0f) return; QColor axisCol(Qt::gray); int h = height() - YMARGIN * 2; painter.setPen(axisCol); painter.drawLine(XMARGIN, YMARGIN + h, width() - XMARGIN, YMARGIN + h); // decide what order of magnitude we are int base = floor(log10(fMax)); float val = pow(10.0f, base); const QString units = tr("KB/s"); const float yMarginText = 2.0; // draw lines painter.setPen(axisCol); painter.drawText(XMARGIN, YMARGIN + h - h * val / fMax - yMarginText, QString("%1 %2").arg(val).arg(units)); for (float y = val; y < fMax; y += val) { int yy = YMARGIN + h - h * y / fMax; painter.drawLine(XMARGIN, yy, width() - XMARGIN, yy); } // if we drew 3 or fewer lines, break them up at the next lower order of // magnitude if (fMax / val <= 3.0f) { axisCol = axisCol.darker(); val = pow(10.0f, base - 1); painter.setPen(axisCol); painter.drawText(XMARGIN, YMARGIN + h - h * val / fMax - yMarginText, QString("%1 %2").arg(val).arg(units)); int count = 1; for (float y = val; y < fMax; y += val, count++) { // don't overwrite lines drawn above if (count % 10 == 0) continue; int yy = YMARGIN + h - h * y / fMax; painter.drawLine(XMARGIN, yy, width() - XMARGIN, yy); } } if (!vSamplesIn.empty()) { QPainterPath p; paintPath(p, vSamplesIn); painter.fillPath(p, QColor(0, 255, 0, 128)); painter.setPen(Qt::green); painter.drawPath(p); } if (!vSamplesOut.empty()) { QPainterPath p; paintPath(p, vSamplesOut); painter.fillPath(p, QColor(255, 0, 0, 128)); painter.setPen(Qt::red); painter.drawPath(p); } } void TrafficGraphWidget::updateRates() { if (!clientModel) return; quint64 bytesIn = clientModel->node().getTotalBytesRecv(), bytesOut = clientModel->node().getTotalBytesSent(); float inRate = (bytesIn - nLastBytesIn) / 1024.0f * 1000 / timer->interval(); float outRate = (bytesOut - nLastBytesOut) / 1024.0f * 1000 / timer->interval(); vSamplesIn.push_front(inRate); vSamplesOut.push_front(outRate); nLastBytesIn = bytesIn; nLastBytesOut = bytesOut; while (vSamplesIn.size() > DESIRED_SAMPLES) { vSamplesIn.pop_back(); } while (vSamplesOut.size() > DESIRED_SAMPLES) { vSamplesOut.pop_back(); } float tmax = 0.0f; for (float f : vSamplesIn) { if (f > tmax) tmax = f; } for (float f : vSamplesOut) { if (f > tmax) tmax = f; } fMax = tmax; update(); } void TrafficGraphWidget::setGraphRangeMins(int mins) { nMins = mins; int msecsPerSample = nMins * 60 * 1000 / DESIRED_SAMPLES; timer->stop(); timer->setInterval(msecsPerSample); clear(); } void TrafficGraphWidget::clear() { timer->stop(); vSamplesOut.clear(); vSamplesIn.clear(); fMax = 0.0f; if (clientModel) { nLastBytesIn = clientModel->node().getTotalBytesRecv(); nLastBytesOut = clientModel->node().getTotalBytesSent(); } timer->start(); } diff --git a/src/qt/transactionview.cpp b/src/qt/transactionview.cpp index 9ae5334ce..c27750d17 100644 --- a/src/qt/transactionview.cpp +++ b/src/qt/transactionview.cpp @@ -1,666 +1,665 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "transactionview.h" - -#include "addresstablemodel.h" -#include "bitcoinunits.h" -#include "csvmodelwriter.h" -#include "editaddressdialog.h" -#include "guiutil.h" -#include "optionsmodel.h" -#include "platformstyle.h" -#include "transactiondescdialog.h" -#include "transactionfilterproxy.h" -#include "transactionrecord.h" -#include "transactiontablemodel.h" -#include "walletmodel.h" - -#include "ui_interface.h" +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include TransactionView::TransactionView(const PlatformStyle *platformStyle, QWidget *parent) : QWidget(parent), model(0), transactionProxyModel(0), transactionView(0), abandonAction(0), columnResizingFixer(0) { // Build filter row setContentsMargins(0, 0, 0, 0); QHBoxLayout *hlayout = new QHBoxLayout(); hlayout->setContentsMargins(0, 0, 0, 0); if (platformStyle->getUseExtraSpacing()) { hlayout->setSpacing(5); hlayout->addSpacing(26); } else { hlayout->setSpacing(0); hlayout->addSpacing(23); } watchOnlyWidget = new QComboBox(this); watchOnlyWidget->setFixedWidth(24); watchOnlyWidget->addItem("", TransactionFilterProxy::WatchOnlyFilter_All); watchOnlyWidget->addItem(platformStyle->SingleColorIcon(":/icons/eye_plus"), "", TransactionFilterProxy::WatchOnlyFilter_Yes); watchOnlyWidget->addItem( platformStyle->SingleColorIcon(":/icons/eye_minus"), "", TransactionFilterProxy::WatchOnlyFilter_No); hlayout->addWidget(watchOnlyWidget); dateWidget = new QComboBox(this); if (platformStyle->getUseExtraSpacing()) { dateWidget->setFixedWidth(121); } else { dateWidget->setFixedWidth(120); } dateWidget->addItem(tr("All"), All); dateWidget->addItem(tr("Today"), Today); dateWidget->addItem(tr("This week"), ThisWeek); dateWidget->addItem(tr("This month"), ThisMonth); dateWidget->addItem(tr("Last month"), LastMonth); dateWidget->addItem(tr("This year"), ThisYear); dateWidget->addItem(tr("Range..."), Range); hlayout->addWidget(dateWidget); typeWidget = new QComboBox(this); if (platformStyle->getUseExtraSpacing()) { typeWidget->setFixedWidth(121); } else { typeWidget->setFixedWidth(120); } typeWidget->addItem(tr("All"), TransactionFilterProxy::ALL_TYPES); typeWidget->addItem( tr("Received with"), TransactionFilterProxy::TYPE(TransactionRecord::RecvWithAddress) | TransactionFilterProxy::TYPE(TransactionRecord::RecvFromOther)); typeWidget->addItem( tr("Sent to"), TransactionFilterProxy::TYPE(TransactionRecord::SendToAddress) | TransactionFilterProxy::TYPE(TransactionRecord::SendToOther)); typeWidget->addItem(tr("To yourself"), TransactionFilterProxy::TYPE( TransactionRecord::SendToSelf)); typeWidget->addItem(tr("Mined"), TransactionFilterProxy::TYPE( TransactionRecord::Generated)); typeWidget->addItem(tr("Other"), TransactionFilterProxy::TYPE(TransactionRecord::Other)); hlayout->addWidget(typeWidget); addressWidget = new QLineEdit(this); addressWidget->setPlaceholderText(tr("Enter address or label to search")); hlayout->addWidget(addressWidget); amountWidget = new QLineEdit(this); amountWidget->setPlaceholderText(tr("Min amount")); if (platformStyle->getUseExtraSpacing()) { amountWidget->setFixedWidth(97); } else { amountWidget->setFixedWidth(100); } amountWidget->setValidator(new QDoubleValidator(0, 1e20, 8, this)); hlayout->addWidget(amountWidget); QVBoxLayout *vlayout = new QVBoxLayout(this); vlayout->setContentsMargins(0, 0, 0, 0); vlayout->setSpacing(0); QTableView *view = new QTableView(this); vlayout->addLayout(hlayout); vlayout->addWidget(createDateRangeWidget()); vlayout->addWidget(view); vlayout->setSpacing(0); int width = view->verticalScrollBar()->sizeHint().width(); // Cover scroll bar width with spacing if (platformStyle->getUseExtraSpacing()) { hlayout->addSpacing(width + 2); } else { hlayout->addSpacing(width); } // Always show scroll bar view->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOn); view->setTabKeyNavigation(false); view->setContextMenuPolicy(Qt::CustomContextMenu); view->installEventFilter(this); transactionView = view; // Actions abandonAction = new QAction(tr("Abandon transaction"), this); QAction *copyAddressAction = new QAction(tr("Copy address"), this); QAction *copyLabelAction = new QAction(tr("Copy label"), this); QAction *copyAmountAction = new QAction(tr("Copy amount"), this); QAction *copyTxIDAction = new QAction(tr("Copy transaction ID"), this); QAction *copyTxHexAction = new QAction(tr("Copy raw transaction"), this); QAction *copyTxPlainText = new QAction(tr("Copy full transaction details"), this); QAction *editLabelAction = new QAction(tr("Edit label"), this); QAction *showDetailsAction = new QAction(tr("Show transaction details"), this); contextMenu = new QMenu(this); contextMenu->addAction(copyAddressAction); contextMenu->addAction(copyLabelAction); contextMenu->addAction(copyAmountAction); contextMenu->addAction(copyTxIDAction); contextMenu->addAction(copyTxHexAction); contextMenu->addAction(copyTxPlainText); contextMenu->addAction(showDetailsAction); contextMenu->addSeparator(); contextMenu->addAction(abandonAction); contextMenu->addAction(editLabelAction); mapperThirdPartyTxUrls = new QSignalMapper(this); // Connect actions connect(mapperThirdPartyTxUrls, SIGNAL(mapped(QString)), this, SLOT(openThirdPartyTxUrl(QString))); connect(dateWidget, SIGNAL(activated(int)), this, SLOT(chooseDate(int))); connect(typeWidget, SIGNAL(activated(int)), this, SLOT(chooseType(int))); connect(watchOnlyWidget, SIGNAL(activated(int)), this, SLOT(chooseWatchonly(int))); connect(addressWidget, SIGNAL(textChanged(QString)), this, SLOT(changedPrefix(QString))); connect(amountWidget, SIGNAL(textChanged(QString)), this, SLOT(changedAmount(QString))); connect(view, SIGNAL(doubleClicked(QModelIndex)), this, SIGNAL(doubleClicked(QModelIndex))); connect(view, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(contextualMenu(QPoint))); connect(abandonAction, SIGNAL(triggered()), this, SLOT(abandonTx())); connect(copyAddressAction, SIGNAL(triggered()), this, SLOT(copyAddress())); connect(copyLabelAction, SIGNAL(triggered()), this, SLOT(copyLabel())); connect(copyAmountAction, SIGNAL(triggered()), this, SLOT(copyAmount())); connect(copyTxIDAction, SIGNAL(triggered()), this, SLOT(copyTxID())); connect(copyTxHexAction, SIGNAL(triggered()), this, SLOT(copyTxHex())); connect(copyTxPlainText, SIGNAL(triggered()), this, SLOT(copyTxPlainText())); connect(editLabelAction, SIGNAL(triggered()), this, SLOT(editLabel())); connect(showDetailsAction, SIGNAL(triggered()), this, SLOT(showDetails())); } void TransactionView::setModel(WalletModel *_model) { this->model = _model; if (_model) { transactionProxyModel = new TransactionFilterProxy(this); transactionProxyModel->setSourceModel( _model->getTransactionTableModel()); transactionProxyModel->setDynamicSortFilter(true); transactionProxyModel->setSortCaseSensitivity(Qt::CaseInsensitive); transactionProxyModel->setFilterCaseSensitivity(Qt::CaseInsensitive); transactionProxyModel->setSortRole(Qt::EditRole); transactionView->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff); transactionView->setModel(transactionProxyModel); transactionView->setAlternatingRowColors(true); transactionView->setSelectionBehavior(QAbstractItemView::SelectRows); transactionView->setSelectionMode(QAbstractItemView::ExtendedSelection); transactionView->setSortingEnabled(true); transactionView->sortByColumn(TransactionTableModel::Date, Qt::DescendingOrder); transactionView->verticalHeader()->hide(); transactionView->setColumnWidth(TransactionTableModel::Status, STATUS_COLUMN_WIDTH); transactionView->setColumnWidth(TransactionTableModel::Watchonly, WATCHONLY_COLUMN_WIDTH); transactionView->setColumnWidth(TransactionTableModel::Date, DATE_COLUMN_WIDTH); transactionView->setColumnWidth(TransactionTableModel::Type, TYPE_COLUMN_WIDTH); transactionView->setColumnWidth(TransactionTableModel::Amount, AMOUNT_MINIMUM_COLUMN_WIDTH); columnResizingFixer = new GUIUtil::TableViewLastColumnResizingFixer( transactionView, AMOUNT_MINIMUM_COLUMN_WIDTH, MINIMUM_COLUMN_WIDTH, this); if (_model->getOptionsModel()) { // Add third party transaction URLs to context menu QStringList listUrls = _model->getOptionsModel()->getThirdPartyTxUrls().split( "|", QString::SkipEmptyParts); for (int i = 0; i < listUrls.size(); ++i) { QString host = QUrl(listUrls[i].trimmed(), QUrl::StrictMode).host(); if (!host.isEmpty()) { // use host as menu item label QAction *thirdPartyTxUrlAction = new QAction(host, this); if (i == 0) { contextMenu->addSeparator(); } contextMenu->addAction(thirdPartyTxUrlAction); connect(thirdPartyTxUrlAction, SIGNAL(triggered()), mapperThirdPartyTxUrls, SLOT(map())); mapperThirdPartyTxUrls->setMapping(thirdPartyTxUrlAction, listUrls[i].trimmed()); } } } // show/hide column Watch-only updateWatchOnlyColumn(_model->wallet().haveWatchOnly()); // Watch-only signal connect(_model, SIGNAL(notifyWatchonlyChanged(bool)), this, SLOT(updateWatchOnlyColumn(bool))); } } void TransactionView::chooseDate(int idx) { if (!transactionProxyModel) { return; } QDate current = QDate::currentDate(); dateRangeWidget->setVisible(false); switch (dateWidget->itemData(idx).toInt()) { case All: transactionProxyModel->setDateRange( TransactionFilterProxy::MIN_DATE, TransactionFilterProxy::MAX_DATE); break; case Today: transactionProxyModel->setDateRange( QDateTime(current), TransactionFilterProxy::MAX_DATE); break; case ThisWeek: { // Find last Monday QDate startOfWeek = current.addDays(-(current.dayOfWeek() - 1)); transactionProxyModel->setDateRange( QDateTime(startOfWeek), TransactionFilterProxy::MAX_DATE); } break; case ThisMonth: transactionProxyModel->setDateRange( QDateTime(QDate(current.year(), current.month(), 1)), TransactionFilterProxy::MAX_DATE); break; case LastMonth: transactionProxyModel->setDateRange( QDateTime( QDate(current.year(), current.month(), 1).addMonths(-1)), QDateTime(QDate(current.year(), current.month(), 1))); break; case ThisYear: transactionProxyModel->setDateRange( QDateTime(QDate(current.year(), 1, 1)), TransactionFilterProxy::MAX_DATE); break; case Range: dateRangeWidget->setVisible(true); dateRangeChanged(); break; } } void TransactionView::chooseType(int idx) { if (!transactionProxyModel) { return; } transactionProxyModel->setTypeFilter(typeWidget->itemData(idx).toInt()); } void TransactionView::chooseWatchonly(int idx) { if (!transactionProxyModel) { return; } transactionProxyModel->setWatchOnlyFilter( static_cast( watchOnlyWidget->itemData(idx).toInt())); } void TransactionView::changedPrefix(const QString &prefix) { if (!transactionProxyModel) { return; } transactionProxyModel->setAddressPrefix(prefix); } void TransactionView::changedAmount(const QString &amount) { if (!transactionProxyModel) { return; } Amount amount_parsed = Amount::zero(); if (BitcoinUnits::parse(model->getOptionsModel()->getDisplayUnit(), amount, &amount_parsed)) { transactionProxyModel->setMinAmount(amount_parsed); } else { transactionProxyModel->setMinAmount(Amount::zero()); } } void TransactionView::exportClicked() { if (!model || !model->getOptionsModel()) { return; } // CSV is currently the only supported format QString filename = GUIUtil::getSaveFileName( this, tr("Export Transaction History"), QString(), tr("Comma separated file (*.csv)"), nullptr); if (filename.isNull()) { return; } CSVModelWriter writer(filename); // name, column, role writer.setModel(transactionProxyModel); writer.addColumn(tr("Confirmed"), 0, TransactionTableModel::ConfirmedRole); if (model->wallet().haveWatchOnly()) { writer.addColumn(tr("Watch-only"), TransactionTableModel::Watchonly); } writer.addColumn(tr("Date"), 0, TransactionTableModel::DateRole); writer.addColumn(tr("Type"), TransactionTableModel::Type, Qt::EditRole); writer.addColumn(tr("Label"), 0, TransactionTableModel::LabelRole); writer.addColumn(tr("Address"), 0, TransactionTableModel::AddressRole); writer.addColumn(BitcoinUnits::getAmountColumnTitle( model->getOptionsModel()->getDisplayUnit()), 0, TransactionTableModel::FormattedAmountRole); writer.addColumn(tr("ID"), 0, TransactionTableModel::TxIDRole); if (!writer.write()) { Q_EMIT message(tr("Exporting Failed"), tr("There was an error trying to save the transaction " "history to %1.") .arg(filename), CClientUIInterface::MSG_ERROR); } else { Q_EMIT message( tr("Exporting Successful"), tr("The transaction history was successfully saved to %1.") .arg(filename), CClientUIInterface::MSG_INFORMATION); } } void TransactionView::contextualMenu(const QPoint &point) { QModelIndex index = transactionView->indexAt(point); QModelIndexList selection = transactionView->selectionModel()->selectedRows(0); if (selection.empty()) { return; } // check if transaction can be abandoned, disable context menu action in // case it doesn't TxId txid; txid.SetHex(selection.at(0) .data(TransactionTableModel::TxHashRole) .toString() .toStdString()); abandonAction->setEnabled(model->wallet().transactionCanBeAbandoned(txid)); if (index.isValid()) { contextMenu->popup(transactionView->viewport()->mapToGlobal(point)); } } void TransactionView::abandonTx() { if (!transactionView || !transactionView->selectionModel()) { return; } QModelIndexList selection = transactionView->selectionModel()->selectedRows(0); // get the hash from the TxHashRole (QVariant / QString) QString hashQStr = selection.at(0).data(TransactionTableModel::TxHashRole).toString(); TxId txid; txid.SetHex(hashQStr.toStdString()); // Abandon the wallet transaction over the walletModel model->wallet().abandonTransaction(txid); // Update the table model->getTransactionTableModel()->updateTransaction(hashQStr, CT_UPDATED, false); } void TransactionView::copyAddress() { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::AddressRole); } void TransactionView::copyLabel() { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::LabelRole); } void TransactionView::copyAmount() { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::FormattedAmountRole); } void TransactionView::copyTxID() { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::TxIDRole); } void TransactionView::copyTxHex() { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::TxHexRole); } void TransactionView::copyTxPlainText() { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::TxPlainTextRole); } void TransactionView::editLabel() { if (!transactionView->selectionModel() || !model) { return; } QModelIndexList selection = transactionView->selectionModel()->selectedRows(); if (!selection.isEmpty()) { AddressTableModel *addressBook = model->getAddressTableModel(); if (!addressBook) { return; } QString address = selection.at(0).data(TransactionTableModel::AddressRole).toString(); if (address.isEmpty()) { // If this transaction has no associated address, exit return; } // Is address in address book? Address book can miss address when a // transaction is sent from outside the UI. int idx = addressBook->lookupAddress(address); if (idx != -1) { // Edit sending / receiving address QModelIndex modelIdx = addressBook->index(idx, 0, QModelIndex()); // Determine type of address, launch appropriate editor dialog type QString type = modelIdx.data(AddressTableModel::TypeRole).toString(); EditAddressDialog dlg(type == AddressTableModel::Receive ? EditAddressDialog::EditReceivingAddress : EditAddressDialog::EditSendingAddress, this); dlg.setModel(addressBook); dlg.loadRow(idx); dlg.exec(); } else { // Add sending address EditAddressDialog dlg(EditAddressDialog::NewSendingAddress, this); dlg.setModel(addressBook); dlg.setAddress(address); dlg.exec(); } } } void TransactionView::showDetails() { if (!transactionView->selectionModel()) { return; } QModelIndexList selection = transactionView->selectionModel()->selectedRows(); if (!selection.isEmpty()) { TransactionDescDialog *dlg = new TransactionDescDialog(selection.at(0)); dlg->setAttribute(Qt::WA_DeleteOnClose); dlg->show(); } } void TransactionView::openThirdPartyTxUrl(QString url) { if (!transactionView || !transactionView->selectionModel()) { return; } QModelIndexList selection = transactionView->selectionModel()->selectedRows(0); if (!selection.isEmpty()) { QDesktopServices::openUrl(QUrl::fromUserInput( url.replace("%s", selection.at(0) .data(TransactionTableModel::TxHashRole) .toString()))); } } QWidget *TransactionView::createDateRangeWidget() { dateRangeWidget = new QFrame(); dateRangeWidget->setFrameStyle(QFrame::Panel | QFrame::Raised); dateRangeWidget->setContentsMargins(1, 1, 1, 1); QHBoxLayout *layout = new QHBoxLayout(dateRangeWidget); layout->setContentsMargins(0, 0, 0, 0); layout->addSpacing(23); layout->addWidget(new QLabel(tr("Range:"))); dateFrom = new QDateTimeEdit(this); dateFrom->setDisplayFormat("dd/MM/yy"); dateFrom->setCalendarPopup(true); dateFrom->setMinimumWidth(100); dateFrom->setDate(QDate::currentDate().addDays(-7)); layout->addWidget(dateFrom); layout->addWidget(new QLabel(tr("to"))); dateTo = new QDateTimeEdit(this); dateTo->setDisplayFormat("dd/MM/yy"); dateTo->setCalendarPopup(true); dateTo->setMinimumWidth(100); dateTo->setDate(QDate::currentDate()); layout->addWidget(dateTo); layout->addStretch(); // Hide by default dateRangeWidget->setVisible(false); // Notify on change connect(dateFrom, SIGNAL(dateChanged(QDate)), this, SLOT(dateRangeChanged())); connect(dateTo, SIGNAL(dateChanged(QDate)), this, SLOT(dateRangeChanged())); return dateRangeWidget; } void TransactionView::dateRangeChanged() { if (!transactionProxyModel) { return; } transactionProxyModel->setDateRange(QDateTime(dateFrom->date()), QDateTime(dateTo->date()).addDays(1)); } void TransactionView::focusTransaction(const QModelIndex &idx) { if (!transactionProxyModel) { return; } QModelIndex targetIdx = transactionProxyModel->mapFromSource(idx); transactionView->scrollTo(targetIdx); transactionView->setCurrentIndex(targetIdx); transactionView->setFocus(); } void TransactionView::focusTransaction(const uint256 &txid) { if (!transactionProxyModel) { return; } const QModelIndexList results = this->model->getTransactionTableModel()->match( this->model->getTransactionTableModel()->index(0, 0), TransactionTableModel::TxHashRole, QString::fromStdString(txid.ToString()), -1); transactionView->setFocus(); transactionView->selectionModel()->clearSelection(); for (const QModelIndex &index : results) { const QModelIndex targetIndex = transactionProxyModel->mapFromSource(index); transactionView->selectionModel()->select( targetIndex, QItemSelectionModel::Rows | QItemSelectionModel::Select); // Called once per destination to ensure all results are in view, unless // transactions are not ordered by (ascending or descending) date. transactionView->scrollTo(targetIndex); // scrollTo() does not scroll far enough the first time when // transactions are ordered by ascending date. if (index == results[0]) { transactionView->scrollTo(targetIndex); } } } // We override the virtual resizeEvent of the QWidget to adjust tables column // sizes as the tables width is proportional to the dialogs width. void TransactionView::resizeEvent(QResizeEvent *event) { QWidget::resizeEvent(event); columnResizingFixer->stretchColumnWidth(TransactionTableModel::ToAddress); } // Need to override default Ctrl+C action for amount as default behaviour is // just to copy DisplayRole text bool TransactionView::eventFilter(QObject *obj, QEvent *event) { if (event->type() == QEvent::KeyPress) { QKeyEvent *ke = static_cast(event); if (ke->key() == Qt::Key_C && ke->modifiers().testFlag(Qt::ControlModifier)) { GUIUtil::copyEntryData(transactionView, 0, TransactionTableModel::TxPlainTextRole); return true; } } return QWidget::eventFilter(obj, event); } // show/hide column Watch-only void TransactionView::updateWatchOnlyColumn(bool fHaveWatchOnly) { watchOnlyWidget->setVisible(fHaveWatchOnly); transactionView->setColumnHidden(TransactionTableModel::Watchonly, !fHaveWatchOnly); } diff --git a/src/qt/transactionview.h b/src/qt/transactionview.h index d1d4c61fe..9500d3c46 100644 --- a/src/qt/transactionview.h +++ b/src/qt/transactionview.h @@ -1,125 +1,125 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #ifndef BITCOIN_QT_TRANSACTIONVIEW_H #define BITCOIN_QT_TRANSACTIONVIEW_H -#include "guiutil.h" -#include "uint256.h" +#include +#include #include #include class PlatformStyle; class TransactionFilterProxy; class WalletModel; QT_BEGIN_NAMESPACE class QComboBox; class QDateTimeEdit; class QFrame; class QLineEdit; class QMenu; class QModelIndex; class QSignalMapper; class QTableView; QT_END_NAMESPACE /** * Widget showing the transaction list for a wallet, including a filter row. * Using the filter row, the user can view or export a subset of the * transactions. */ class TransactionView : public QWidget { Q_OBJECT public: explicit TransactionView(const PlatformStyle *platformStyle, QWidget *parent = 0); void setModel(WalletModel *model); // Date ranges for filter enum DateEnum { All, Today, ThisWeek, ThisMonth, LastMonth, ThisYear, Range }; enum ColumnWidths { STATUS_COLUMN_WIDTH = 30, WATCHONLY_COLUMN_WIDTH = 23, DATE_COLUMN_WIDTH = 120, TYPE_COLUMN_WIDTH = 113, AMOUNT_MINIMUM_COLUMN_WIDTH = 120, MINIMUM_COLUMN_WIDTH = 23 }; private: WalletModel *model; TransactionFilterProxy *transactionProxyModel; QTableView *transactionView; QComboBox *dateWidget; QComboBox *typeWidget; QComboBox *watchOnlyWidget; QLineEdit *addressWidget; QLineEdit *amountWidget; QMenu *contextMenu; QSignalMapper *mapperThirdPartyTxUrls; QFrame *dateRangeWidget; QDateTimeEdit *dateFrom; QDateTimeEdit *dateTo; QAction *abandonAction; QWidget *createDateRangeWidget(); GUIUtil::TableViewLastColumnResizingFixer *columnResizingFixer; virtual void resizeEvent(QResizeEvent *event) override; bool eventFilter(QObject *obj, QEvent *event) override; private Q_SLOTS: void contextualMenu(const QPoint &); void dateRangeChanged(); void showDetails(); void copyAddress(); void editLabel(); void copyLabel(); void copyAmount(); void copyTxID(); void copyTxHex(); void copyTxPlainText(); void openThirdPartyTxUrl(QString url); void updateWatchOnlyColumn(bool fHaveWatchOnly); void abandonTx(); Q_SIGNALS: void doubleClicked(const QModelIndex &); /** * Fired when a message should be reported to the user. */ void message(const QString &title, const QString &message, unsigned int style); public Q_SLOTS: void chooseDate(int idx); void chooseType(int idx); void chooseWatchonly(int idx); void changedPrefix(const QString &prefix); void changedAmount(const QString &amount); void exportClicked(); void focusTransaction(const QModelIndex &); void focusTransaction(const uint256 &txid); }; #endif // BITCOIN_QT_TRANSACTIONVIEW_H diff --git a/src/qt/walletframe.cpp b/src/qt/walletframe.cpp index c825c9fe8..93341086c 100644 --- a/src/qt/walletframe.cpp +++ b/src/qt/walletframe.cpp @@ -1,179 +1,179 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "walletframe.h" -#include "walletmodel.h" +#include -#include "bitcoingui.h" -#include "walletview.h" - -#include -#include +#include +#include +#include #include #include +#include +#include + WalletFrame::WalletFrame(const PlatformStyle *_platformStyle, const Config *configIn, BitcoinGUI *_gui) : QFrame(_gui), gui(_gui), platformStyle(_platformStyle), config(configIn) { // Leave HBox hook for adding a list view later QHBoxLayout *walletFrameLayout = new QHBoxLayout(this); setContentsMargins(0, 0, 0, 0); walletStack = new QStackedWidget(this); walletFrameLayout->setContentsMargins(0, 0, 0, 0); walletFrameLayout->addWidget(walletStack); QLabel *noWallet = new QLabel(tr("No wallet has been loaded.")); noWallet->setAlignment(Qt::AlignCenter); walletStack->addWidget(noWallet); } WalletFrame::~WalletFrame() {} void WalletFrame::setClientModel(ClientModel *_clientModel) { this->clientModel = _clientModel; } bool WalletFrame::addWallet(WalletModel *walletModel) { if (!gui || !clientModel || !walletModel) { return false; } const QString name = walletModel->getWalletName(); if (mapWalletViews.count(name) > 0) { return false; } WalletView *walletView = new WalletView(platformStyle, config, this); walletView->setBitcoinGUI(gui); walletView->setClientModel(clientModel); walletView->setWalletModel(walletModel); walletView->showOutOfSyncWarning(bOutOfSync); /* TODO we should goto the currently selected page once dynamically adding * wallets is supported */ walletView->gotoOverviewPage(); walletStack->addWidget(walletView); mapWalletViews[name] = walletView; // Ensure a walletView is able to show the main window connect(walletView, SIGNAL(showNormalIfMinimized()), gui, SLOT(showNormalIfMinimized())); connect(walletView, SIGNAL(outOfSyncWarningClicked()), this, SLOT(outOfSyncWarningClicked())); return true; } bool WalletFrame::setCurrentWallet(const QString &name) { if (mapWalletViews.count(name) == 0) return false; WalletView *walletView = mapWalletViews.value(name); walletStack->setCurrentWidget(walletView); assert(walletView); walletView->updateEncryptionStatus(); return true; } bool WalletFrame::removeWallet(const QString &name) { if (mapWalletViews.count(name) == 0) return false; WalletView *walletView = mapWalletViews.take(name); walletStack->removeWidget(walletView); return true; } void WalletFrame::removeAllWallets() { QMap::const_iterator i; for (i = mapWalletViews.constBegin(); i != mapWalletViews.constEnd(); ++i) walletStack->removeWidget(i.value()); mapWalletViews.clear(); } bool WalletFrame::handlePaymentRequest(const SendCoinsRecipient &recipient) { WalletView *walletView = currentWalletView(); if (!walletView) return false; return walletView->handlePaymentRequest(recipient); } void WalletFrame::showOutOfSyncWarning(bool fShow) { bOutOfSync = fShow; QMap::const_iterator i; for (i = mapWalletViews.constBegin(); i != mapWalletViews.constEnd(); ++i) i.value()->showOutOfSyncWarning(fShow); } void WalletFrame::gotoOverviewPage() { QMap::const_iterator i; for (i = mapWalletViews.constBegin(); i != mapWalletViews.constEnd(); ++i) i.value()->gotoOverviewPage(); } void WalletFrame::gotoHistoryPage() { QMap::const_iterator i; for (i = mapWalletViews.constBegin(); i != mapWalletViews.constEnd(); ++i) i.value()->gotoHistoryPage(); } void WalletFrame::gotoReceiveCoinsPage() { QMap::const_iterator i; for (i = mapWalletViews.constBegin(); i != mapWalletViews.constEnd(); ++i) i.value()->gotoReceiveCoinsPage(); } void WalletFrame::gotoSendCoinsPage(QString addr) { QMap::const_iterator i; for (i = mapWalletViews.constBegin(); i != mapWalletViews.constEnd(); ++i) i.value()->gotoSendCoinsPage(addr); } void WalletFrame::gotoSignMessageTab(QString addr) { WalletView *walletView = currentWalletView(); if (walletView) walletView->gotoSignMessageTab(addr); } void WalletFrame::gotoVerifyMessageTab(QString addr) { WalletView *walletView = currentWalletView(); if (walletView) walletView->gotoVerifyMessageTab(addr); } void WalletFrame::encryptWallet(bool status) { WalletView *walletView = currentWalletView(); if (walletView) walletView->encryptWallet(status); } void WalletFrame::backupWallet() { WalletView *walletView = currentWalletView(); if (walletView) walletView->backupWallet(); } void WalletFrame::changePassphrase() { WalletView *walletView = currentWalletView(); if (walletView) walletView->changePassphrase(); } void WalletFrame::unlockWallet() { WalletView *walletView = currentWalletView(); if (walletView) walletView->unlockWallet(); } void WalletFrame::usedSendingAddresses() { WalletView *walletView = currentWalletView(); if (walletView) walletView->usedSendingAddresses(); } void WalletFrame::usedReceivingAddresses() { WalletView *walletView = currentWalletView(); if (walletView) walletView->usedReceivingAddresses(); } WalletView *WalletFrame::currentWalletView() { return qobject_cast(walletStack->currentWidget()); } void WalletFrame::outOfSyncWarningClicked() { Q_EMIT requestedSyncWarningInfo(); } diff --git a/src/qt/walletview.cpp b/src/qt/walletview.cpp index d9bc934d4..3cafbe7a3 100644 --- a/src/qt/walletview.cpp +++ b/src/qt/walletview.cpp @@ -1,370 +1,369 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. -#include "walletview.h" - -#include "addressbookpage.h" -#include "askpassphrasedialog.h" -#include "bitcoingui.h" -#include "clientmodel.h" -#include "guiutil.h" -#include "optionsmodel.h" -#include "overviewpage.h" -#include "platformstyle.h" -#include "receivecoinsdialog.h" -#include "sendcoinsdialog.h" -#include "signverifymessagedialog.h" -#include "transactiontablemodel.h" -#include "transactionview.h" -#include "walletmodel.h" - -#include "interfaces/node.h" -#include "ui_interface.h" +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #include #include #include #include #include #include #include WalletView::WalletView(const PlatformStyle *_platformStyle, const Config *cfg, QWidget *parent) : QStackedWidget(parent), clientModel(0), walletModel(0), platformStyle(_platformStyle) { // Create tabs overviewPage = new OverviewPage(platformStyle); transactionsPage = new QWidget(this); QVBoxLayout *vbox = new QVBoxLayout(); QHBoxLayout *hbox_buttons = new QHBoxLayout(); transactionView = new TransactionView(platformStyle, this); vbox->addWidget(transactionView); QPushButton *exportButton = new QPushButton(tr("&Export"), this); exportButton->setToolTip( tr("Export the data in the current tab to a file")); if (platformStyle->getImagesOnButtons()) { exportButton->setIcon(platformStyle->SingleColorIcon(":/icons/export")); } hbox_buttons->addStretch(); hbox_buttons->addWidget(exportButton); vbox->addLayout(hbox_buttons); transactionsPage->setLayout(vbox); receiveCoinsPage = new ReceiveCoinsDialog(platformStyle, cfg); sendCoinsPage = new SendCoinsDialog(platformStyle); usedSendingAddressesPage = new AddressBookPage(platformStyle, AddressBookPage::ForEditing, AddressBookPage::SendingTab, this); usedReceivingAddressesPage = new AddressBookPage(platformStyle, AddressBookPage::ForEditing, AddressBookPage::ReceivingTab, this); addWidget(overviewPage); addWidget(transactionsPage); addWidget(receiveCoinsPage); addWidget(sendCoinsPage); // Clicking on a transaction on the overview pre-selects the transaction on // the transaction history page connect(overviewPage, SIGNAL(transactionClicked(QModelIndex)), transactionView, SLOT(focusTransaction(QModelIndex))); connect(overviewPage, SIGNAL(outOfSyncWarningClicked()), this, SLOT(requestedSyncWarningInfo())); // Highlight transaction after send connect(sendCoinsPage, SIGNAL(coinsSent(uint256)), transactionView, SLOT(focusTransaction(uint256))); // Double-clicking on a transaction on the transaction history page shows // details connect(transactionView, SIGNAL(doubleClicked(QModelIndex)), transactionView, SLOT(showDetails())); // Clicking on "Export" allows to export the transaction list connect(exportButton, SIGNAL(clicked()), transactionView, SLOT(exportClicked())); // Pass through messages from sendCoinsPage connect(sendCoinsPage, SIGNAL(message(QString, QString, unsigned int)), this, SIGNAL(message(QString, QString, unsigned int))); // Pass through messages from transactionView connect(transactionView, SIGNAL(message(QString, QString, unsigned int)), this, SIGNAL(message(QString, QString, unsigned int))); } WalletView::~WalletView() {} void WalletView::setBitcoinGUI(BitcoinGUI *gui) { if (gui) { // Clicking on a transaction on the overview page simply sends you to // transaction history page connect(overviewPage, SIGNAL(transactionClicked(QModelIndex)), gui, SLOT(gotoHistoryPage())); // Navigate to transaction history page after send connect(sendCoinsPage, SIGNAL(coinsSent(uint256)), gui, SLOT(gotoHistoryPage())); // Receive and report messages connect(this, SIGNAL(message(QString, QString, unsigned int)), gui, SLOT(message(QString, QString, unsigned int))); // Pass through encryption status changed signals connect(this, SIGNAL(encryptionStatusChanged()), gui, SLOT(updateWalletStatus())); // Pass through transaction notifications connect(this, SIGNAL(incomingTransaction(QString, int, Amount, QString, QString, QString, QString)), gui, SLOT(incomingTransaction(QString, int, Amount, QString, QString, QString, QString))); // Connect HD enabled state signal connect(this, SIGNAL(hdEnabledStatusChanged()), gui, SLOT(updateWalletStatus())); } } void WalletView::setClientModel(ClientModel *_clientModel) { this->clientModel = _clientModel; overviewPage->setClientModel(_clientModel); sendCoinsPage->setClientModel(_clientModel); } void WalletView::setWalletModel(WalletModel *_walletModel) { this->walletModel = _walletModel; // Put transaction list in tabs transactionView->setModel(_walletModel); overviewPage->setWalletModel(_walletModel); receiveCoinsPage->setModel(_walletModel); sendCoinsPage->setModel(_walletModel); usedReceivingAddressesPage->setModel( _walletModel ? _walletModel->getAddressTableModel() : nullptr); usedSendingAddressesPage->setModel( _walletModel ? _walletModel->getAddressTableModel() : nullptr); if (_walletModel) { // Receive and pass through messages from wallet model connect(_walletModel, SIGNAL(message(QString, QString, unsigned int)), this, SIGNAL(message(QString, QString, unsigned int))); // Handle changes in encryption status connect(_walletModel, SIGNAL(encryptionStatusChanged()), this, SIGNAL(encryptionStatusChanged())); updateEncryptionStatus(); // update HD status Q_EMIT hdEnabledStatusChanged(); // Balloon pop-up for new transaction connect(_walletModel->getTransactionTableModel(), SIGNAL(rowsInserted(QModelIndex, int, int)), this, SLOT(processNewTransaction(QModelIndex, int, int))); // Ask for passphrase if needed connect(_walletModel, SIGNAL(requireUnlock()), this, SLOT(unlockWallet())); // Show progress dialog connect(_walletModel, SIGNAL(showProgress(QString, int)), this, SLOT(showProgress(QString, int))); } } void WalletView::processNewTransaction(const QModelIndex &parent, int start, int end) { // Prevent balloon-spam when initial block download is in progress if (!walletModel || !clientModel || clientModel->node().isInitialBlockDownload()) { return; } TransactionTableModel *ttm = walletModel->getTransactionTableModel(); if (!ttm || ttm->processingQueuedTransactions()) { return; } QString date = ttm->index(start, TransactionTableModel::Date, parent) .data() .toString(); qint64 amount = ttm->index(start, TransactionTableModel::Amount, parent) .data(Qt::EditRole) .toULongLong(); QString type = ttm->index(start, TransactionTableModel::Type, parent) .data() .toString(); QModelIndex index = ttm->index(start, 0, parent); QString address = ttm->data(index, TransactionTableModel::AddressRole).toString(); QString label = ttm->data(index, TransactionTableModel::LabelRole).toString(); Q_EMIT incomingTransaction(date, walletModel->getOptionsModel()->getDisplayUnit(), int64_t(amount) * SATOSHI, type, address, label, walletModel->getWalletName()); } void WalletView::gotoOverviewPage() { setCurrentWidget(overviewPage); } void WalletView::gotoHistoryPage() { setCurrentWidget(transactionsPage); } void WalletView::gotoReceiveCoinsPage() { setCurrentWidget(receiveCoinsPage); } void WalletView::gotoSendCoinsPage(QString addr) { setCurrentWidget(sendCoinsPage); if (!addr.isEmpty()) { sendCoinsPage->setAddress(addr); } } void WalletView::gotoSignMessageTab(QString addr) { // calls show() in showTab_SM() SignVerifyMessageDialog *signVerifyMessageDialog = new SignVerifyMessageDialog(platformStyle, this); signVerifyMessageDialog->setAttribute(Qt::WA_DeleteOnClose); signVerifyMessageDialog->setModel(walletModel); signVerifyMessageDialog->showTab_SM(true); if (!addr.isEmpty()) { signVerifyMessageDialog->setAddress_SM(addr); } } void WalletView::gotoVerifyMessageTab(QString addr) { // calls show() in showTab_VM() SignVerifyMessageDialog *signVerifyMessageDialog = new SignVerifyMessageDialog(platformStyle, this); signVerifyMessageDialog->setAttribute(Qt::WA_DeleteOnClose); signVerifyMessageDialog->setModel(walletModel); signVerifyMessageDialog->showTab_VM(true); if (!addr.isEmpty()) { signVerifyMessageDialog->setAddress_VM(addr); } } bool WalletView::handlePaymentRequest(const SendCoinsRecipient &recipient) { return sendCoinsPage->handlePaymentRequest(recipient); } void WalletView::showOutOfSyncWarning(bool fShow) { overviewPage->showOutOfSyncWarning(fShow); } void WalletView::updateEncryptionStatus() { Q_EMIT encryptionStatusChanged(); } void WalletView::encryptWallet(bool status) { if (!walletModel) { return; } AskPassphraseDialog dlg(status ? AskPassphraseDialog::Encrypt : AskPassphraseDialog::Decrypt, this); dlg.setModel(walletModel); dlg.exec(); updateEncryptionStatus(); } void WalletView::backupWallet() { QString filename = GUIUtil::getSaveFileName(this, tr("Backup Wallet"), QString(), tr("Wallet Data (*.dat)"), nullptr); if (filename.isEmpty()) { return; } if (!walletModel->wallet().backupWallet(filename.toLocal8Bit().data())) { Q_EMIT message( tr("Backup Failed"), tr("There was an error trying to save the wallet data to %1.") .arg(filename), CClientUIInterface::MSG_ERROR); } else { Q_EMIT message( tr("Backup Successful"), tr("The wallet data was successfully saved to %1.").arg(filename), CClientUIInterface::MSG_INFORMATION); } } void WalletView::changePassphrase() { AskPassphraseDialog dlg(AskPassphraseDialog::ChangePass, this); dlg.setModel(walletModel); dlg.exec(); } void WalletView::unlockWallet() { if (!walletModel) { return; } // Unlock wallet when requested by wallet model if (walletModel->getEncryptionStatus() == WalletModel::Locked) { AskPassphraseDialog dlg(AskPassphraseDialog::Unlock, this); dlg.setModel(walletModel); dlg.exec(); } } void WalletView::usedSendingAddresses() { if (!walletModel) { return; } usedSendingAddressesPage->show(); usedSendingAddressesPage->raise(); usedSendingAddressesPage->activateWindow(); } void WalletView::usedReceivingAddresses() { if (!walletModel) { return; } usedReceivingAddressesPage->show(); usedReceivingAddressesPage->raise(); usedReceivingAddressesPage->activateWindow(); } void WalletView::showProgress(const QString &title, int nProgress) { if (nProgress == 0) { progressDialog = new QProgressDialog(title, "", 0, 100); progressDialog->setWindowModality(Qt::ApplicationModal); progressDialog->setMinimumDuration(0); progressDialog->setCancelButton(0); progressDialog->setAutoClose(false); progressDialog->setValue(0); } else if (nProgress == 100) { if (progressDialog) { progressDialog->close(); progressDialog->deleteLater(); } } else if (progressDialog) { progressDialog->setValue(nProgress); } } void WalletView::requestedSyncWarningInfo() { Q_EMIT outOfSyncWarningClicked(); } diff --git a/src/qt/walletview.h b/src/qt/walletview.h index 9efc4cc05..20fde7002 100644 --- a/src/qt/walletview.h +++ b/src/qt/walletview.h @@ -1,142 +1,142 @@ // Copyright (c) 2011-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #ifndef BITCOIN_QT_WALLETVIEW_H #define BITCOIN_QT_WALLETVIEW_H -#include "amount.h" +#include #include class BitcoinGUI; class ClientModel; class OverviewPage; class PlatformStyle; class ReceiveCoinsDialog; class SendCoinsDialog; class SendCoinsRecipient; class TransactionView; class WalletModel; class AddressBookPage; class Config; QT_BEGIN_NAMESPACE class QModelIndex; class QProgressDialog; QT_END_NAMESPACE /** * WalletView class. This class represents the view to a single wallet. * It was added to support multiple wallet functionality. Each wallet gets its * own WalletView instance. * It communicates with both the client and the wallet models to give the user * an up-to-date view of the current core state. */ class WalletView : public QStackedWidget { Q_OBJECT public: explicit WalletView(const PlatformStyle *platformStyle, const Config *cfg, QWidget *parent); ~WalletView(); void setBitcoinGUI(BitcoinGUI *gui); /** * Set the client model. * The client model represents the part of the core that communicates with * the P2P network, and is wallet-agnostic. */ void setClientModel(ClientModel *clientModel); WalletModel *getWalletModel() { return walletModel; } /** * Set the wallet model. * The wallet model represents a bitcoin wallet, and offers access to the * list of transactions, address book and sending functionality. */ void setWalletModel(WalletModel *walletModel); bool handlePaymentRequest(const SendCoinsRecipient &recipient); void showOutOfSyncWarning(bool fShow); private: ClientModel *clientModel; WalletModel *walletModel; OverviewPage *overviewPage; QWidget *transactionsPage; ReceiveCoinsDialog *receiveCoinsPage; SendCoinsDialog *sendCoinsPage; AddressBookPage *usedSendingAddressesPage; AddressBookPage *usedReceivingAddressesPage; TransactionView *transactionView; QProgressDialog *progressDialog; const PlatformStyle *platformStyle; public Q_SLOTS: /** Switch to overview (home) page */ void gotoOverviewPage(); /** Switch to history (transactions) page */ void gotoHistoryPage(); /** Switch to receive coins page */ void gotoReceiveCoinsPage(); /** Switch to send coins page */ void gotoSendCoinsPage(QString addr = ""); /** Show Sign/Verify Message dialog and switch to sign message tab */ void gotoSignMessageTab(QString addr = ""); /** Show Sign/Verify Message dialog and switch to verify message tab */ void gotoVerifyMessageTab(QString addr = ""); /** * Show incoming transaction notification for new transactions. * * The new items are those between start and end inclusive, under the given * parent item. */ void processNewTransaction(const QModelIndex &parent, int start, int end); /** Encrypt the wallet */ void encryptWallet(bool status); /** Backup the wallet */ void backupWallet(); /** Change encrypted wallet passphrase */ void changePassphrase(); /** Ask for passphrase to unlock wallet temporarily */ void unlockWallet(); /** Show used sending addresses */ void usedSendingAddresses(); /** Show used receiving addresses */ void usedReceivingAddresses(); /** Re-emit encryption status signal */ void updateEncryptionStatus(); /** Show progress dialog e.g. for rescan */ void showProgress(const QString &title, int nProgress); /** User has requested more information about the out of sync state */ void requestedSyncWarningInfo(); Q_SIGNALS: /** Signal that we want to show the main window */ void showNormalIfMinimized(); /** Fired when a message should be reported to the user */ void message(const QString &title, const QString &message, unsigned int style); /** Encryption status of wallet changed */ void encryptionStatusChanged(); /** HD-Enabled status of wallet changed (only possible during startup) */ void hdEnabledStatusChanged(); /** Notify that a new transaction appeared */ void incomingTransaction(const QString &date, int unit, const Amount amount, const QString &type, const QString &address, const QString &label, const QString &walletName); /** Notify that the out of sync warning icon has been pressed */ void outOfSyncWarningClicked(); }; #endif // BITCOIN_QT_WALLETVIEW_H