diff --git a/src/config.cpp b/src/config.cpp index e82cf3e72c..130953f6ee 100644 --- a/src/config.cpp +++ b/src/config.cpp @@ -1,81 +1,97 @@ // Copyright (c) 2017 The Bitcoin developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #include "config.h" #include "chainparams.h" #include "consensus/consensus.h" #include "globals.h" GlobalConfig::GlobalConfig() : useCashAddr(false) {} bool GlobalConfig::SetMaxBlockSize(uint64_t maxBlockSize) { // Do not allow maxBlockSize to be set below historic 1MB limit // It cannot be equal either because of the "must be big" UAHF rule. if (maxBlockSize <= LEGACY_MAX_BLOCK_SIZE) { return false; } nMaxBlockSize = maxBlockSize; return true; } uint64_t GlobalConfig::GetMaxBlockSize() const { return nMaxBlockSize; } bool GlobalConfig::SetBlockPriorityPercentage(int64_t blockPriorityPercentage) { // blockPriorityPercentage has to belong to [0..100] if ((blockPriorityPercentage < 0) || (blockPriorityPercentage > 100)) { return false; } nBlockPriorityPercentage = blockPriorityPercentage; return true; } uint8_t GlobalConfig::GetBlockPriorityPercentage() const { return nBlockPriorityPercentage; } const CChainParams &GlobalConfig::GetChainParams() const { return Params(); } static GlobalConfig gConfig; const Config &GetConfig() { return gConfig; } void GlobalConfig::SetCashAddrEncoding(bool c) { useCashAddr = c; } bool GlobalConfig::UseCashAddrEncoding() const { return useCashAddr; } DummyConfig::DummyConfig() : chainParams(CreateChainParams(CBaseChainParams::REGTEST)) {} DummyConfig::DummyConfig(std::string net) : chainParams(CreateChainParams(net)) {} void DummyConfig::SetChainParams(std::string net) { chainParams = CreateChainParams(net); } void GlobalConfig::SetExcessUTXOCharge(Amount fee) { excessUTXOCharge = fee; } Amount GlobalConfig::GetExcessUTXOCharge() const { return excessUTXOCharge; } void GlobalConfig::SetMinFeePerKB(CFeeRate fee) { feePerKB = fee; } CFeeRate GlobalConfig::GetMinFeePerKB() const { return feePerKB; } + +void GlobalConfig::SetRPCUserAndPassword(std::string userAndPassword) { + rpcUserAndPassword = userAndPassword; +} + +std::string GlobalConfig::GetRPCUserAndPassword() const { + return rpcUserAndPassword; +} + +void GlobalConfig::SetRPCCORSDomain(std::string corsDomain) { + rpcCORSDomain = corsDomain; +} + +std::string GlobalConfig::GetRPCCORSDomain() const { + return rpcCORSDomain; +} diff --git a/src/config.h b/src/config.h index 90d98133dc..c8f013302b 100644 --- a/src/config.h +++ b/src/config.h @@ -1,93 +1,108 @@ // Copyright (c) 2017 Amaury SÉCHET // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #ifndef BITCOIN_CONFIG_H #define BITCOIN_CONFIG_H #include "amount.h" #include "feerate.h" #include #include #include #include class CChainParams; class Config : public boost::noncopyable { public: virtual bool SetMaxBlockSize(uint64_t maxBlockSize) = 0; virtual uint64_t GetMaxBlockSize() const = 0; virtual bool SetBlockPriorityPercentage(int64_t blockPriorityPercentage) = 0; virtual uint8_t GetBlockPriorityPercentage() const = 0; virtual const CChainParams &GetChainParams() const = 0; virtual void SetCashAddrEncoding(bool) = 0; virtual bool UseCashAddrEncoding() const = 0; virtual void SetExcessUTXOCharge(Amount amt) = 0; virtual Amount GetExcessUTXOCharge() const = 0; virtual void SetMinFeePerKB(CFeeRate amt) = 0; virtual CFeeRate GetMinFeePerKB() const = 0; + + virtual void SetRPCUserAndPassword(std::string userAndPassword) = 0; + virtual std::string GetRPCUserAndPassword() const = 0; + virtual void SetRPCCORSDomain(std::string corsDomain) = 0; + virtual std::string GetRPCCORSDomain() const = 0; }; class GlobalConfig final : public Config { public: GlobalConfig(); bool SetMaxBlockSize(uint64_t maxBlockSize) override; uint64_t GetMaxBlockSize() const override; bool SetBlockPriorityPercentage(int64_t blockPriorityPercentage) override; uint8_t GetBlockPriorityPercentage() const override; const CChainParams &GetChainParams() const override; void SetCashAddrEncoding(bool) override; bool UseCashAddrEncoding() const override; void SetExcessUTXOCharge(Amount) override; Amount GetExcessUTXOCharge() const override; void SetMinFeePerKB(CFeeRate amt) override; CFeeRate GetMinFeePerKB() const override; + void SetRPCUserAndPassword(std::string userAndPassword) override; + std::string GetRPCUserAndPassword() const override; + void SetRPCCORSDomain(std::string corsDomain) override; + std::string GetRPCCORSDomain() const override; + private: bool useCashAddr; Amount excessUTXOCharge; CFeeRate feePerKB; }; // Dummy for subclassing in unittests class DummyConfig : public Config { public: DummyConfig(); DummyConfig(std::string net); bool SetMaxBlockSize(uint64_t maxBlockSize) override { return false; } uint64_t GetMaxBlockSize() const override { return 0; } bool SetBlockPriorityPercentage(int64_t blockPriorityPercentage) override { return false; } uint8_t GetBlockPriorityPercentage() const override { return 0; } void SetChainParams(std::string net); const CChainParams &GetChainParams() const override { return *chainParams; } void SetCashAddrEncoding(bool) override {} bool UseCashAddrEncoding() const override { return false; } void SetExcessUTXOCharge(Amount amt) override {} Amount GetExcessUTXOCharge() const override { return Amount::zero(); } void SetMinFeePerKB(CFeeRate amt) override{}; CFeeRate GetMinFeePerKB() const override { return CFeeRate(Amount::zero()); } + void SetRPCUserAndPassword(std::string userAndPassword) override{}; + std::string GetRPCUserAndPassword() const override { return ""; }; + void SetRPCCORSDomain(std::string corsDomain) override{}; + std::string GetRPCCORSDomain() const override { return ""; }; + private: std::unique_ptr chainParams; }; // Temporary woraround. const Config &GetConfig(); #endif diff --git a/src/globals.cpp b/src/globals.cpp index 2c9a5609a1..ac26466f1f 100644 --- a/src/globals.cpp +++ b/src/globals.cpp @@ -1,11 +1,14 @@ // Copyright (c) 2017 Amaury SÉCHET // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #include "globals.h" #include "consensus/consensus.h" #include "policy/policy.h" uint64_t nMaxBlockSize = DEFAULT_MAX_BLOCK_SIZE; uint64_t nBlockPriorityPercentage = DEFAULT_BLOCK_PRIORITY_PERCENTAGE; + +std::string rpcUserAndPassword; +std::string rpcCORSDomain; diff --git a/src/globals.h b/src/globals.h index 93cbc71ae3..f500d1cae1 100644 --- a/src/globals.h +++ b/src/globals.h @@ -1,14 +1,23 @@ // Copyright (c) 2017 Amaury SÉCHET // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #ifndef BITCOIN_GLOBALS_H #define BITCOIN_GLOBALS_H #include +#include /** The largest block size this node will accept. */ extern uint64_t nMaxBlockSize; extern uint64_t nBlockPriorityPercentage; +/** RPC authentication configs */ + +// Pre-base64-encoded authentication token, with user and password separated +// by a colon. +extern std::string rpcUserAndPassword; +// CORS domain, the allowed Origin +extern std::string rpcCORSDomain; + #endif // BITCOIN_GLOBALS_H diff --git a/src/httprpc.cpp b/src/httprpc.cpp index 91b1596430..9f5ad4cee0 100644 --- a/src/httprpc.cpp +++ b/src/httprpc.cpp @@ -1,400 +1,398 @@ // Copyright (c) 2015-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #include "httprpc.h" #include "base58.h" #include "chainparams.h" #include "config.h" #include "crypto/hmac_sha256.h" #include "httpserver.h" #include "random.h" #include "rpc/protocol.h" #include "rpc/server.h" #include "sync.h" #include "ui_interface.h" #include "util.h" #include "utilstrencodings.h" #include // boost::trim #include /** WWW-Authenticate to present with 401 Unauthorized response */ static const char *WWW_AUTH_HEADER_DATA = "Basic realm=\"jsonrpc\""; /** Simple one-shot callback timer to be used by the RPC mechanism to e.g. * re-lock the wallet. */ class HTTPRPCTimer : public RPCTimerBase { public: HTTPRPCTimer(struct event_base *eventBase, std::function &func, int64_t millis) : ev(eventBase, false, func) { struct timeval tv; tv.tv_sec = millis / 1000; tv.tv_usec = (millis % 1000) * 1000; ev.trigger(&tv); } private: HTTPEvent ev; }; class HTTPRPCTimerInterface : public RPCTimerInterface { public: HTTPRPCTimerInterface(struct event_base *_base) : base(_base) {} const char *Name() override { return "HTTP"; } RPCTimerBase *NewTimer(std::function &func, int64_t millis) override { return new HTTPRPCTimer(base, func, millis); } private: struct event_base *base; }; -/* Pre-base64-encoded authentication token */ -static std::string strRPCUserColonPass; /* Stored RPC timer interface (for unregistration) */ static HTTPRPCTimerInterface *httpRPCTimerInterface = 0; -/* RPC CORS Domain, allowed Origin */ -static std::string strRPCCORSDomain; static void JSONErrorReply(HTTPRequest *req, const UniValue &objError, const UniValue &id) { // Send error reply from json-rpc error object. int nStatus = HTTP_INTERNAL_SERVER_ERROR; int code = find_value(objError, "code").get_int(); if (code == RPC_INVALID_REQUEST) nStatus = HTTP_BAD_REQUEST; else if (code == RPC_METHOD_NOT_FOUND) nStatus = HTTP_NOT_FOUND; std::string strReply = JSONRPCReply(NullUniValue, objError, id); req->WriteHeader("Content-Type", "application/json"); req->WriteReply(nStatus, strReply); } // This function checks username and password against -rpcauth entries from // config file. static bool multiUserAuthorized(std::string strUserPass) { if (strUserPass.find(":") == std::string::npos) { return false; } std::string strUser = strUserPass.substr(0, strUserPass.find(":")); std::string strPass = strUserPass.substr(strUserPass.find(":") + 1); if (gArgs.IsArgSet("-rpcauth")) { // Search for multi-user login/pass "rpcauth" from config for (const std::string &strRPCAuth : gArgs.GetArgs("-rpcauth")) { std::vector vFields; boost::split(vFields, strRPCAuth, boost::is_any_of(":$")); if (vFields.size() != 3) { // Incorrect formatting in config file continue; } std::string strName = vFields[0]; if (!TimingResistantEqual(strName, strUser)) { continue; } std::string strSalt = vFields[1]; std::string strHash = vFields[2]; static const unsigned int KEY_SIZE = 32; uint8_t out[KEY_SIZE]; CHMAC_SHA256(reinterpret_cast(strSalt.c_str()), strSalt.size()) .Write(reinterpret_cast(strPass.c_str()), strPass.size()) .Finalize(out); std::vector hexvec(out, out + KEY_SIZE); std::string strHashFromPass = HexStr(hexvec); if (TimingResistantEqual(strHashFromPass, strHash)) { return true; } } } return false; } -static bool RPCAuthorized(const std::string &strAuth, +static bool RPCAuthorized(Config &config, const std::string &strAuth, std::string &strAuthUsernameOut) { // Belt-and-suspenders measure if InitRPCAuthentication was not called. - if (strRPCUserColonPass.empty()) { + if (config.GetRPCUserAndPassword().empty()) { return false; } if (strAuth.substr(0, 6) != "Basic ") { return false; } std::string strUserPass64 = strAuth.substr(6); boost::trim(strUserPass64); std::string strUserPass = DecodeBase64(strUserPass64); if (strUserPass.find(":") != std::string::npos) { strAuthUsernameOut = strUserPass.substr(0, strUserPass.find(":")); } // Check if authorized under single-user field - if (TimingResistantEqual(strUserPass, strRPCUserColonPass)) { + if (TimingResistantEqual(strUserPass, config.GetRPCUserAndPassword())) { return true; } return multiUserAuthorized(strUserPass); } -static bool checkCORS(HTTPRequest *req) { +static bool checkCORS(Config &config, HTTPRequest *req) { // https://www.w3.org/TR/cors/#resource-requests // 1. If the Origin header is not present terminate this set of steps. // The request is outside the scope of this specification. std::pair origin = req->GetHeader("origin"); if (!origin.first) { return false; } // 2. If the value of the Origin header is not a case-sensitive match for // any of the values in list of origins do not set any additional headers // and terminate this set of steps. // Note: Always matching is acceptable since the list of origins can be // unbounded. - if (origin.second != strRPCCORSDomain) { + if (origin.second != config.GetRPCCORSDomain()) { return false; } if (req->GetRequestMethod() == HTTPRequest::OPTIONS) { // 6.2 Preflight Request // In response to a preflight request the resource indicates which // methods and headers (other than simple methods and simple // headers) it is willing to handle and whether it supports // credentials. // Resources must use the following set of steps to determine which // additional headers to use in the response: // 3. Let method be the value as result of parsing the // Access-Control-Request-Method header. // If there is no Access-Control-Request-Method header or if parsing // failed, do not set any additional headers and terminate this set // of steps. The request is outside the scope of this specification. std::pair method = req->GetHeader("access-control-request-method"); if (!method.first) { return false; } // 4. Let header field-names be the values as result of parsing // the Access-Control-Request-Headers headers. // If there are no Access-Control-Request-Headers headers let header // field-names be the empty list. // If parsing failed do not set any additional headers and terminate // this set of steps. The request is outside the scope of this // specification. std::pair header_field_names = req->GetHeader("access-control-request-headers"); // 5. If method is not a case-sensitive match for any of the // values in list of methods do not set any additional headers // and terminate this set of steps. // Note: Always matching is acceptable since the list of methods // can be unbounded. if (method.second != "POST") { return false; } // 6. If any of the header field-names is not a ASCII case- // insensitive match for any of the values in list of headers do not // set any additional headers and terminate this set of steps. // Note: Always matching is acceptable since the list of headers can // be unbounded. const std::string &list_of_headers = "authorization,content-type"; // 7. If the resource supports credentials add a single // Access-Control-Allow-Origin header, with the value of the Origin // header as value, and add a single // Access-Control-Allow-Credentials header with the case-sensitive // string "true" as value. req->WriteHeader("Access-Control-Allow-Origin", origin.second); req->WriteHeader("Access-Control-Allow-Credentials", "true"); // 8. Optionally add a single Access-Control-Max-Age header with as // value the amount of seconds the user agent is allowed to cache // the result of the request. // 9. If method is a simple method this step may be skipped. // Add one or more Access-Control-Allow-Methods headers consisting // of (a subset of) the list of methods. // If a method is a simple method it does not need to be listed, but // this is not prohibited. // Note: Since the list of methods can be unbounded, simply // returning the method indicated by // Access-Control-Request-Method (if supported) can be enough. req->WriteHeader("Access-Control-Allow-Methods", method.second); // 10. If each of the header field-names is a simple header and none // is Content-Type, this step may be skipped. // Add one or more Access-Control-Allow-Headers headers consisting // of (a subset of) the list of headers. req->WriteHeader("Access-Control-Allow-Headers", header_field_names.first ? header_field_names.second : list_of_headers); req->WriteReply(HTTP_OK); return true; } // 6.1 Simple Cross-Origin Request, Actual Request, and Redirects // In response to a simple cross-origin request or actual request the // resource indicates whether or not to share the response. // If the resource has been relocated, it indicates whether to share its // new URL. // Resources must use the following set of steps to determine which // additional headers to use in the response: // 3. If the resource supports credentials add a single // Access-Control-Allow-Origin header, with the value of the Origin // header as value, and add a single Access-Control-Allow-Credentials // header with the case-sensitive string "true" as value. req->WriteHeader("Access-Control-Allow-Origin", origin.second); req->WriteHeader("Access-Control-Allow-Credentials", "true"); // 4. If the list of exposed headers is not empty add one or more // Access-Control-Expose-Headers headers, with as values the header // field names given in the list of exposed headers. req->WriteHeader("Access-Control-Expose-Headers", "WWW-Authenticate"); return false; } static bool HTTPReq_JSONRPC(Config &config, HTTPRequest *req, const std::string &) { // First, check and/or set CORS headers - if (checkCORS(req)) { + if (checkCORS(config, req)) { return true; } // JSONRPC handles only POST if (req->GetRequestMethod() != HTTPRequest::POST) { req->WriteReply(HTTP_BAD_METHOD, "JSONRPC server handles only POST requests"); return false; } // Check authorization std::pair authHeader = req->GetHeader("authorization"); if (!authHeader.first) { req->WriteHeader("WWW-Authenticate", WWW_AUTH_HEADER_DATA); req->WriteReply(HTTP_UNAUTHORIZED); return false; } JSONRPCRequest jreq; - if (!RPCAuthorized(authHeader.second, jreq.authUser)) { + if (!RPCAuthorized(config, authHeader.second, jreq.authUser)) { LogPrintf("ThreadRPCServer incorrect password attempt from %s\n", req->GetPeer().ToString()); /* Deter brute-forcing. * If this results in a DoS the user really shouldn't have their RPC * port exposed. */ MilliSleep(250); req->WriteHeader("WWW-Authenticate", WWW_AUTH_HEADER_DATA); req->WriteReply(HTTP_UNAUTHORIZED); return false; } try { // Parse request UniValue valRequest; if (!valRequest.read(req->ReadBody())) throw JSONRPCError(RPC_PARSE_ERROR, "Parse error"); // Set the URI jreq.URI = req->GetURI(); std::string strReply; // singleton request if (valRequest.isObject()) { jreq.parse(valRequest); UniValue result = tableRPC.execute(config, jreq); // Send reply strReply = JSONRPCReply(result, NullUniValue, jreq.id); } else if (valRequest.isArray()) { // array of requests strReply = JSONRPCExecBatch(config, jreq, valRequest.get_array()); } else { throw JSONRPCError(RPC_PARSE_ERROR, "Top-level object parse error"); } req->WriteHeader("Content-Type", "application/json"); req->WriteReply(HTTP_OK, strReply); } catch (const UniValue &objError) { JSONErrorReply(req, objError, jreq.id); return false; } catch (const std::exception &e) { JSONErrorReply(req, JSONRPCError(RPC_PARSE_ERROR, e.what()), jreq.id); return false; } return true; } -static bool InitRPCAuthentication() { +static bool InitRPCAuthentication(Config &config) { if (gArgs.GetArg("-rpcpassword", "") == "") { LogPrintf("No rpcpassword set - using random cookie authentication\n"); - if (!GenerateAuthCookie(&strRPCUserColonPass)) { + std::string generatedUserAndPassword; + if (!GenerateAuthCookie(&generatedUserAndPassword)) { // Same message as AbortNode. uiInterface.ThreadSafeMessageBox( _("Error: A fatal internal error occurred, see debug.log for " "details"), "", CClientUIInterface::MSG_ERROR); return false; } + config.SetRPCUserAndPassword(generatedUserAndPassword); } else { LogPrintf("Config options rpcuser and rpcpassword will soon be " "deprecated. Locally-run instances may remove rpcuser to use " "cookie-based auth, or may be replaced with rpcauth. Please " "see share/rpcuser for rpcauth auth generation.\n"); - strRPCUserColonPass = gArgs.GetArg("-rpcuser", "") + ":" + - gArgs.GetArg("-rpcpassword", ""); + config.SetRPCUserAndPassword(gArgs.GetArg("-rpcuser", "") + ":" + + gArgs.GetArg("-rpcpassword", "")); } - strRPCCORSDomain = gArgs.GetArg("-rpccorsdomain", ""); + config.SetRPCCORSDomain(gArgs.GetArg("-rpccorsdomain", "")); return true; } -bool StartHTTPRPC() { +bool StartHTTPRPC(Config &config) { LogPrint(BCLog::RPC, "Starting HTTP RPC server\n"); - if (!InitRPCAuthentication()) return false; + if (!InitRPCAuthentication(config)) return false; RegisterHTTPHandler("/", true, HTTPReq_JSONRPC); #ifdef ENABLE_WALLET // ifdef can be removed once we switch to better endpoint support and API // versioning RegisterHTTPHandler("/wallet/", false, HTTPReq_JSONRPC); #endif assert(EventBase()); httpRPCTimerInterface = new HTTPRPCTimerInterface(EventBase()); RPCSetTimerInterface(httpRPCTimerInterface); return true; } void InterruptHTTPRPC() { LogPrint(BCLog::RPC, "Interrupting HTTP RPC server\n"); } void StopHTTPRPC() { LogPrint(BCLog::RPC, "Stopping HTTP RPC server\n"); UnregisterHTTPHandler("/", true); if (httpRPCTimerInterface) { RPCUnsetTimerInterface(httpRPCTimerInterface); delete httpRPCTimerInterface; httpRPCTimerInterface = 0; } } diff --git a/src/httprpc.h b/src/httprpc.h index f8a32b2291..5976a4f43a 100644 --- a/src/httprpc.h +++ b/src/httprpc.h @@ -1,37 +1,38 @@ // Copyright (c) 2015 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #ifndef BITCOIN_HTTPRPC_H #define BITCOIN_HTTPRPC_H #include #include +class Config; class HTTPRequest; /** Start HTTP RPC subsystem. * Precondition; HTTP and RPC has been started. */ -bool StartHTTPRPC(); +bool StartHTTPRPC(Config &config); /** Interrupt HTTP RPC subsystem. */ void InterruptHTTPRPC(); /** Stop HTTP RPC subsystem. * Precondition; HTTP and RPC has been stopped. */ void StopHTTPRPC(); /** Start HTTP REST subsystem. * Precondition; HTTP and RPC has been started. */ bool StartREST(); /** Interrupt RPC REST subsystem. */ void InterruptREST(); /** Stop HTTP REST subsystem. * Precondition; HTTP and RPC has been stopped. */ void StopREST(); #endif diff --git a/src/init.cpp b/src/init.cpp index 22ea4b6196..b22d708c3d 100644 --- a/src/init.cpp +++ b/src/init.cpp @@ -1,2331 +1,2331 @@ // Copyright (c) 2009-2010 Satoshi Nakamoto // Copyright (c) 2009-2016 The Bitcoin Core developers // Distributed under the MIT software license, see the accompanying // file COPYING or http://www.opensource.org/licenses/mit-license.php. #if defined(HAVE_CONFIG_H) #include "config/bitcoin-config.h" #endif #include "init.h" #include "addrman.h" #include "amount.h" #include "chain.h" #include "chainparams.h" #include "checkpoints.h" #include "compat/sanity.h" #include "config.h" #include "consensus/validation.h" #include "diskblockpos.h" #include "fs.h" #include "httprpc.h" #include "httpserver.h" #include "key.h" #include "miner.h" #include "net.h" #include "net_processing.h" #include "netbase.h" #include "policy/policy.h" #include "rpc/register.h" #include "rpc/server.h" #include "scheduler.h" #include "script/scriptcache.h" #include "script/sigcache.h" #include "script/standard.h" #include "timedata.h" #include "torcontrol.h" #include "txdb.h" #include "txmempool.h" #include "ui_interface.h" #include "util.h" #include "utilmoneystr.h" #include "validation.h" #include "validationinterface.h" #ifdef ENABLE_WALLET #include "wallet/rpcdump.h" #include "wallet/wallet.h" #endif #include "warnings.h" #include #include #include #ifndef WIN32 #include #endif #include #include #include #include #include #include #include #if ENABLE_ZMQ #include "zmq/zmqnotificationinterface.h" #endif bool fFeeEstimatesInitialized = false; static const bool DEFAULT_PROXYRANDOMIZE = true; static const bool DEFAULT_REST_ENABLE = false; static const bool DEFAULT_DISABLE_SAFEMODE = false; static const bool DEFAULT_STOPAFTERBLOCKIMPORT = false; std::unique_ptr g_connman; std::unique_ptr peerLogic; #if ENABLE_ZMQ static CZMQNotificationInterface *pzmqNotificationInterface = nullptr; #endif #ifdef WIN32 // Win32 LevelDB doesn't use filedescriptors, and the ones used for accessing // block files don't count towards the fd_set size limit anyway. #define MIN_CORE_FILEDESCRIPTORS 0 #else #define MIN_CORE_FILEDESCRIPTORS 150 #endif /** Used to pass flags to the Bind() function */ enum BindFlags { BF_NONE = 0, BF_EXPLICIT = (1U << 0), BF_REPORT_ERROR = (1U << 1), BF_WHITELIST = (1U << 2), }; static const char *FEE_ESTIMATES_FILENAME = "fee_estimates.dat"; ////////////////////////////////////////////////////////////////////////////// // // Shutdown // // // Thread management and startup/shutdown: // // The network-processing threads are all part of a thread group created by // AppInit() or the Qt main() function. // // A clean exit happens when StartShutdown() or the SIGTERM signal handler sets // fRequestShutdown, which triggers the DetectShutdownThread(), which interrupts // the main thread group. DetectShutdownThread() then exits, which causes // AppInit() to continue (it .joins the shutdown thread). Shutdown() is then // called to clean up database connections, and stop other threads that should // only be stopped after the main network-processing threads have exited. // // Note that if running -daemon the parent process returns from AppInit2 before // adding any threads to the threadGroup, so .join_all() returns immediately and // the parent exits from main(). // // Shutdown for Qt is very similar, only it uses a QTimer to detect // fRequestShutdown getting set, and then does the normal Qt shutdown thing. // std::atomic fRequestShutdown(false); std::atomic fDumpMempoolLater(false); void StartShutdown() { fRequestShutdown = true; } bool ShutdownRequested() { return fRequestShutdown; } /** * This is a minimally invasive approach to shutdown on LevelDB read errors from * the chainstate, while keeping user interface out of the common library, which * is shared between bitcoind, and bitcoin-qt and non-server tools. */ class CCoinsViewErrorCatcher final : public CCoinsViewBacked { public: CCoinsViewErrorCatcher(CCoinsView *view) : CCoinsViewBacked(view) {} bool GetCoin(const COutPoint &outpoint, Coin &coin) const override { try { return CCoinsViewBacked::GetCoin(outpoint, coin); } catch (const std::runtime_error &e) { uiInterface.ThreadSafeMessageBox( _("Error reading from database, shutting down."), "", CClientUIInterface::MSG_ERROR); LogPrintf("Error reading from database: %s\n", e.what()); // Starting the shutdown sequence and returning false to the caller // would be interpreted as 'entry not found' (as opposed to unable // to read data), and could lead to invalid interpretation. Just // exit immediately, as we can't continue anyway, and all writes // should be atomic. abort(); } } // Writes do not need similar protection, as failure to write is handled by // the caller. }; static CCoinsViewDB *pcoinsdbview = nullptr; static CCoinsViewErrorCatcher *pcoinscatcher = nullptr; static std::unique_ptr globalVerifyHandle; void Interrupt(boost::thread_group &threadGroup) { InterruptHTTPServer(); InterruptHTTPRPC(); InterruptRPC(); InterruptREST(); InterruptTorControl(); if (g_connman) { g_connman->Interrupt(); } threadGroup.interrupt_all(); } void Shutdown() { LogPrintf("%s: In progress...\n", __func__); static CCriticalSection cs_Shutdown; TRY_LOCK(cs_Shutdown, lockShutdown); if (!lockShutdown) { return; } /// Note: Shutdown() must be able to handle cases in which AppInit2() failed /// part of the way, for example if the data directory was found to be /// locked. Be sure that anything that writes files or flushes caches only /// does this if the respective module was initialized. RenameThread("bitcoin-shutoff"); mempool.AddTransactionsUpdated(1); StopHTTPRPC(); StopREST(); StopRPC(); StopHTTPServer(); #ifdef ENABLE_WALLET for (CWalletRef pwallet : vpwallets) { pwallet->Flush(false); } #endif MapPort(false); UnregisterValidationInterface(peerLogic.get()); peerLogic.reset(); g_connman.reset(); StopTorControl(); UnregisterNodeSignals(GetNodeSignals()); if (fDumpMempoolLater && gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { DumpMempool(); } if (fFeeEstimatesInitialized) { fs::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME; CAutoFile est_fileout(fsbridge::fopen(est_path, "wb"), SER_DISK, CLIENT_VERSION); if (!est_fileout.IsNull()) { mempool.WriteFeeEstimates(est_fileout); } else { LogPrintf("%s: Failed to write fee estimates to %s\n", __func__, est_path.string()); } fFeeEstimatesInitialized = false; } { LOCK(cs_main); if (pcoinsTip != nullptr) { FlushStateToDisk(); } delete pcoinsTip; pcoinsTip = nullptr; delete pcoinscatcher; pcoinscatcher = nullptr; delete pcoinsdbview; pcoinsdbview = nullptr; delete pblocktree; pblocktree = nullptr; } #ifdef ENABLE_WALLET for (CWalletRef pwallet : vpwallets) { pwallet->Flush(true); } #endif #if ENABLE_ZMQ if (pzmqNotificationInterface) { UnregisterValidationInterface(pzmqNotificationInterface); delete pzmqNotificationInterface; pzmqNotificationInterface = nullptr; } #endif #ifndef WIN32 try { fs::remove(GetPidFile()); } catch (const fs::filesystem_error &e) { LogPrintf("%s: Unable to remove pidfile: %s\n", __func__, e.what()); } #endif UnregisterAllValidationInterfaces(); #ifdef ENABLE_WALLET for (CWalletRef pwallet : vpwallets) { delete pwallet; } vpwallets.clear(); #endif globalVerifyHandle.reset(); ECC_Stop(); LogPrintf("%s: done\n", __func__); } /** * Signal handlers are very limited in what they are allowed to do, so: */ void HandleSIGTERM(int) { fRequestShutdown = true; } void HandleSIGHUP(int) { GetLogger().fReopenDebugLog = true; } static bool Bind(CConnman &connman, const CService &addr, unsigned int flags) { if (!(flags & BF_EXPLICIT) && IsLimited(addr)) { return false; } std::string strError; if (!connman.BindListenPort(addr, strError, (flags & BF_WHITELIST) != 0)) { if (flags & BF_REPORT_ERROR) { return InitError(strError); } return false; } return true; } void OnRPCStarted() { uiInterface.NotifyBlockTip.connect(&RPCNotifyBlockChange); } void OnRPCStopped() { uiInterface.NotifyBlockTip.disconnect(&RPCNotifyBlockChange); RPCNotifyBlockChange(false, nullptr); cvBlockChange.notify_all(); LogPrint(BCLog::RPC, "RPC stopped.\n"); } void OnRPCPreCommand(const ContextFreeRPCCommand &cmd) { // Observe safe mode. std::string strWarning = GetWarnings("rpc"); if (strWarning != "" && !gArgs.GetBoolArg("-disablesafemode", DEFAULT_DISABLE_SAFEMODE) && !cmd.okSafeMode) { throw JSONRPCError(RPC_FORBIDDEN_BY_SAFE_MODE, std::string("Safe mode: ") + strWarning); } } std::string HelpMessage(HelpMessageMode mode) { const auto defaultBaseParams = CreateBaseChainParams(CBaseChainParams::MAIN); const auto testnetBaseParams = CreateBaseChainParams(CBaseChainParams::TESTNET); const auto defaultChainParams = CreateChainParams(CBaseChainParams::MAIN); const auto testnetChainParams = CreateChainParams(CBaseChainParams::TESTNET); const bool showDebug = gArgs.GetBoolArg("-help-debug", false); // When adding new options to the categories, please keep and ensure // alphabetical ordering. Do not translate _(...) -help-debug options, Many // technical terms, and only a very small audience, so is unnecessary stress // to translators. std::string strUsage = HelpMessageGroup(_("Options:")); strUsage += HelpMessageOpt("-?", _("Print this help message and exit")); strUsage += HelpMessageOpt("-version", _("Print version and exit")); strUsage += HelpMessageOpt( "-alertnotify=", _("Execute command when a relevant alert is received or we see a " "really long fork (%s in cmd is replaced by message)")); strUsage += HelpMessageOpt("-blocknotify=", _("Execute command when the best block changes " "(%s in cmd is replaced by block hash)")); if (showDebug) { strUsage += HelpMessageOpt( "-blocksonly", strprintf( _("Whether to operate in a blocks only mode (default: %d)"), DEFAULT_BLOCKSONLY)); } strUsage += HelpMessageOpt( "-assumevalid=", strprintf( _("If this block is in the chain assume that it and its ancestors " "are valid and potentially skip their script verification (0 to " "verify all, default: %s, testnet: %s)"), defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex())); strUsage += HelpMessageOpt( "-conf=", strprintf(_("Specify configuration file (default: %s)"), BITCOIN_CONF_FILENAME)); if (mode == HMM_BITCOIND) { #if HAVE_DECL_DAEMON strUsage += HelpMessageOpt( "-daemon", _("Run in the background as a daemon and accept commands")); #endif } strUsage += HelpMessageOpt("-datadir=", _("Specify data directory")); if (showDebug) { strUsage += HelpMessageOpt( "-dbbatchsize", strprintf( "Maximum database write batch size in bytes (default: %u)", nDefaultDbBatchSize)); } strUsage += HelpMessageOpt( "-dbcache=", strprintf( _("Set database cache size in megabytes (%d to %d, default: %d)"), nMinDbCache, nMaxDbCache, nDefaultDbCache)); if (showDebug) { strUsage += HelpMessageOpt( "-feefilter", strprintf("Tell other nodes to filter invs to us by " "our mempool min fee (default: %d)", DEFAULT_FEEFILTER)); } strUsage += HelpMessageOpt( "-loadblock=", _("Imports blocks from external blk000??.dat file on startup")); strUsage += HelpMessageOpt( "-maxorphantx=", strprintf(_("Keep at most unconnectable " "transactions in memory (default: %u)"), DEFAULT_MAX_ORPHAN_TRANSACTIONS)); strUsage += HelpMessageOpt("-maxmempool=", strprintf(_("Keep the transaction memory pool " "below megabytes (default: %u)"), DEFAULT_MAX_MEMPOOL_SIZE)); strUsage += HelpMessageOpt("-mempoolexpiry=", strprintf(_("Do not keep transactions in the mempool " "longer than hours (default: %u)"), DEFAULT_MEMPOOL_EXPIRY)); if (showDebug) { strUsage += HelpMessageOpt( "-minimumchainwork=", strprintf( "Minimum work assumed to exist on a valid chain in hex " "(default: %s, testnet: %s)", defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnetChainParams->GetConsensus().nMinimumChainWork.GetHex())); } strUsage += HelpMessageOpt("-persistmempool", strprintf(_("Whether to save the mempool on shutdown " "and load on restart (default: %u)"), DEFAULT_PERSIST_MEMPOOL)); strUsage += HelpMessageOpt( "-blockreconstructionextratxn=", strprintf(_("Extra transactions to keep in memory for compact block " "reconstructions (default: %u)"), DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN)); strUsage += HelpMessageOpt( "-par=", strprintf(_("Set the number of script verification threads (%u to %d, " "0 = auto, <0 = leave that many cores free, default: %d)"), -GetNumCores(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS)); #ifndef WIN32 strUsage += HelpMessageOpt( "-pid=", strprintf(_("Specify pid file (default: %s)"), BITCOIN_PID_FILENAME)); #endif strUsage += HelpMessageOpt( "-prune=", strprintf( _("Reduce storage requirements by enabling pruning (deleting) of " "old blocks. This allows the pruneblockchain RPC to be called to " "delete specific blocks, and enables automatic pruning of old " "blocks if a target size in MiB is provided. This mode is " "incompatible with -txindex and -rescan. " "Warning: Reverting this setting requires re-downloading the " "entire blockchain. " "(default: 0 = disable pruning blocks, 1 = allow manual pruning " "via RPC, >%u = automatically prune block files to stay under " "the specified target size in MiB)"), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); strUsage += HelpMessageOpt( "-reindex-chainstate", _("Rebuild chain state from the currently indexed blocks")); strUsage += HelpMessageOpt("-reindex", _("Rebuild chain state and block index from " "the blk*.dat files on disk")); #ifndef WIN32 strUsage += HelpMessageOpt( "-sysperms", _("Create new files with system default permissions, instead of umask " "077 (only effective with disabled wallet functionality)")); #endif strUsage += HelpMessageOpt( "-txindex", strprintf(_("Maintain a full transaction index, used by " "the getrawtransaction rpc call (default: %d)"), DEFAULT_TXINDEX)); strUsage += HelpMessageOpt( "-usecashaddr", _("Use Cash Address for destination encoding instead " "of base58 (activate by default on Jan, 14)")); strUsage += HelpMessageGroup(_("Connection options:")); strUsage += HelpMessageOpt( "-addnode=", _("Add a node to connect to and attempt to keep the connection open")); strUsage += HelpMessageOpt( "-banscore=", strprintf( _("Threshold for disconnecting misbehaving peers (default: %u)"), DEFAULT_BANSCORE_THRESHOLD)); strUsage += HelpMessageOpt( "-bantime=", strprintf(_("Number of seconds to keep misbehaving " "peers from reconnecting (default: %u)"), DEFAULT_MISBEHAVING_BANTIME)); strUsage += HelpMessageOpt("-bind=", _("Bind to given address and always listen on " "it. Use [host]:port notation for IPv6")); strUsage += HelpMessageOpt("-connect=", _("Connect only to the specified node(s); -noconnect or " "-connect=0 alone to disable automatic connections")); strUsage += HelpMessageOpt("-discover", _("Discover own IP addresses (default: 1 when " "listening and no -externalip or -proxy)")); strUsage += HelpMessageOpt( "-dns", _("Allow DNS lookups for -addnode, -seednode and -connect") + " " + strprintf(_("(default: %d)"), DEFAULT_NAME_LOOKUP)); strUsage += HelpMessageOpt( "-dnsseed", _("Query for peer addresses via DNS lookup, if low on " "addresses (default: 1 unless -connect/-noconnect)")); strUsage += HelpMessageOpt("-externalip=", _("Specify your own public address")); strUsage += HelpMessageOpt( "-forcednsseed", strprintf( _("Always query for peer addresses via DNS lookup (default: %d)"), DEFAULT_FORCEDNSSEED)); strUsage += HelpMessageOpt("-listen", _("Accept connections from outside (default: " "1 if no -proxy or -connect/-noconnect)")); strUsage += HelpMessageOpt( "-listenonion", strprintf(_("Automatically create Tor hidden service (default: %d)"), DEFAULT_LISTEN_ONION)); strUsage += HelpMessageOpt( "-maxconnections=", strprintf(_("Maintain at most connections to peers (default: %u)"), DEFAULT_MAX_PEER_CONNECTIONS)); strUsage += HelpMessageOpt("-maxreceivebuffer=", strprintf(_("Maximum per-connection receive buffer, " "*1000 bytes (default: %u)"), DEFAULT_MAXRECEIVEBUFFER)); strUsage += HelpMessageOpt( "-maxsendbuffer=", strprintf(_("Maximum per-connection send buffer, " "*1000 bytes (default: %u)"), DEFAULT_MAXSENDBUFFER)); strUsage += HelpMessageOpt( "-maxtimeadjustment", strprintf(_("Maximum allowed median peer time offset adjustment. Local " "perspective of time may be influenced by peers forward or " "backward by this amount. (default: %u seconds)"), DEFAULT_MAX_TIME_ADJUSTMENT)); strUsage += HelpMessageOpt("-onion=", strprintf(_("Use separate SOCKS5 proxy to reach peers " "via Tor hidden services (default: %s)"), "-proxy")); strUsage += HelpMessageOpt( "-onlynet=", _("Only connect to nodes in network (ipv4, ipv6 or onion)")); strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %d)"), DEFAULT_PERMIT_BAREMULTISIG)); strUsage += HelpMessageOpt( "-peerbloomfilters", strprintf(_("Support filtering of blocks and transaction with bloom " "filters (default: %d)"), DEFAULT_PEERBLOOMFILTERS)); strUsage += HelpMessageOpt( "-port=", strprintf( _("Listen for connections on (default: %u or testnet: %u)"), defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort())); strUsage += HelpMessageOpt("-proxy=", _("Connect through SOCKS5 proxy")); strUsage += HelpMessageOpt( "-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This " "enables Tor stream isolation (default: %d)"), DEFAULT_PROXYRANDOMIZE)); strUsage += HelpMessageOpt( "-seednode=", _("Connect to a node to retrieve peer addresses, and disconnect")); strUsage += HelpMessageOpt( "-timeout=", strprintf(_("Specify connection timeout in " "milliseconds (minimum: 1, default: %d)"), DEFAULT_CONNECT_TIMEOUT)); strUsage += HelpMessageOpt("-torcontrol=:", strprintf(_("Tor control port to use if onion " "listening enabled (default: %s)"), DEFAULT_TOR_CONTROL)); strUsage += HelpMessageOpt("-torpassword=", _("Tor control port password (default: empty)")); #ifdef USE_UPNP #if USE_UPNP strUsage += HelpMessageOpt("-upnp", _("Use UPnP to map the listening port " "(default: 1 when listening and no -proxy)")); #else strUsage += HelpMessageOpt( "-upnp", strprintf(_("Use UPnP to map the listening port (default: %u)"), 0)); #endif #endif strUsage += HelpMessageOpt("-whitebind=", _("Bind to given address and whitelist peers connecting " "to it. Use [host]:port notation for IPv6")); strUsage += HelpMessageOpt( "-whitelist=", _("Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) " "or CIDR notated network (e.g. 1.2.3.0/24). Can be specified " "multiple times.") + " " + _("Whitelisted peers cannot be DoS banned and their " "transactions are always relayed, even if they are already " "in the mempool, useful e.g. for a gateway")); strUsage += HelpMessageOpt( "-whitelistrelay", strprintf(_("Accept relayed transactions received from whitelisted " "peers even when not relaying transactions (default: %d)"), DEFAULT_WHITELISTRELAY)); strUsage += HelpMessageOpt( "-whitelistforcerelay", strprintf(_("Force relay of transactions from whitelisted peers even " "if they violate local relay policy (default: %d)"), DEFAULT_WHITELISTFORCERELAY)); strUsage += HelpMessageOpt( "-maxuploadtarget=", strprintf(_("Tries to keep outbound traffic under the given target (in " "MiB per 24h), 0 = no limit (default: %d)"), DEFAULT_MAX_UPLOAD_TARGET)); #ifdef ENABLE_WALLET strUsage += CWallet::GetWalletHelpString(showDebug); #endif #if ENABLE_ZMQ strUsage += HelpMessageGroup(_("ZeroMQ notification options:")); strUsage += HelpMessageOpt("-zmqpubhashblock=
", _("Enable publish hash block in
")); strUsage += HelpMessageOpt("-zmqpubhashtx=
", _("Enable publish hash transaction in
")); strUsage += HelpMessageOpt("-zmqpubrawblock=
", _("Enable publish raw block in
")); strUsage += HelpMessageOpt("-zmqpubrawtx=
", _("Enable publish raw transaction in
")); #endif strUsage += HelpMessageGroup(_("Debugging/Testing options:")); strUsage += HelpMessageOpt("-uacomment=", _("Append comment to the user agent string")); if (showDebug) { strUsage += HelpMessageOpt( "-checkblocks=", strprintf( _("How many blocks to check at startup (default: %u, 0 = all)"), DEFAULT_CHECKBLOCKS)); strUsage += HelpMessageOpt("-checklevel=", strprintf(_("How thorough the block verification of " "-checkblocks is (0-4, default: %u)"), DEFAULT_CHECKLEVEL)); strUsage += HelpMessageOpt( "-checkblockindex", strprintf("Do a full consistency check for mapBlockIndex, " "setBlockIndexCandidates, chainActive and " "mapBlocksUnlinked occasionally. Also sets -checkmempool " "(default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt( "-checkmempool=", strprintf("Run checks every transactions (default: %u)", defaultChainParams->DefaultConsistencyChecks())); strUsage += HelpMessageOpt( "-checkpoints", strprintf("Only accept block chain matching " "built-in checkpoints (default: %d)", DEFAULT_CHECKPOINTS_ENABLED)); strUsage += HelpMessageOpt( "-disablesafemode", strprintf("Disable safemode, override a real " "safe mode event (default: %d)", DEFAULT_DISABLE_SAFEMODE)); strUsage += HelpMessageOpt( "-testsafemode", strprintf("Force safe mode (default: %d)", DEFAULT_TESTSAFEMODE)); strUsage += HelpMessageOpt("-dropmessagestest=", "Randomly drop 1 of every network messages"); strUsage += HelpMessageOpt("-fuzzmessagestest=", "Randomly fuzz 1 of every network messages"); strUsage += HelpMessageOpt( "-stopafterblockimport", strprintf( "Stop running after importing blocks from disk (default: %d)", DEFAULT_STOPAFTERBLOCKIMPORT)); strUsage += HelpMessageOpt( "-stopatheight", strprintf("Stop running after reaching the given " "height in the main chain (default: %u)", DEFAULT_STOPATHEIGHT)); strUsage += HelpMessageOpt( "-limitancestorcount=", strprintf("Do not accept transactions if number of in-mempool " "ancestors is or more (default: %u)", DEFAULT_ANCESTOR_LIMIT)); strUsage += HelpMessageOpt("-limitancestorsize=", strprintf("Do not accept transactions whose size " "with all in-mempool ancestors exceeds " " kilobytes (default: %u)", DEFAULT_ANCESTOR_SIZE_LIMIT)); strUsage += HelpMessageOpt( "-limitdescendantcount=", strprintf("Do not accept transactions if any ancestor would have " " or more in-mempool descendants (default: %u)", DEFAULT_DESCENDANT_LIMIT)); strUsage += HelpMessageOpt( "-limitdescendantsize=", strprintf("Do not accept transactions if any ancestor would have " "more than kilobytes of in-mempool descendants " "(default: %u).", DEFAULT_DESCENDANT_SIZE_LIMIT)); } strUsage += HelpMessageOpt( "-debug=", strprintf(_("Output debugging information (default: %u, supplying " " is optional)"), 0) + ". " + _("If is not supplied or if = 1, " "output all debugging information.") + _(" can be:") + " " + ListLogCategories() + "."); strUsage += HelpMessageOpt( "-debugexclude=", strprintf(_("Exclude debugging information for a category. Can be used " "in conjunction with -debug=1 to output debug logs for all " "categories except one or more specified categories."))); if (showDebug) { strUsage += HelpMessageOpt( "-nodebug", "Turn off debugging messages, same as -debug=0"); } strUsage += HelpMessageOpt( "-help-debug", _("Show all debugging options (usage: --help -help-debug)")); strUsage += HelpMessageOpt( "-logips", strprintf(_("Include IP addresses in debug output (default: %d)"), DEFAULT_LOGIPS)); strUsage += HelpMessageOpt( "-logtimestamps", strprintf(_("Prepend debug output with timestamp (default: %d)"), DEFAULT_LOGTIMESTAMPS)); if (showDebug) { strUsage += HelpMessageOpt( "-logtimemicros", strprintf( "Add microsecond precision to debug timestamps (default: %d)", DEFAULT_LOGTIMEMICROS)); strUsage += HelpMessageOpt( "-mocktime=", "Replace actual time with seconds since epoch (default: 0)"); strUsage += HelpMessageOpt( "-limitfreerelay=", strprintf("Continuously rate-limit free transactions to *1000 " "bytes per minute (default: %u)", DEFAULT_LIMITFREERELAY)); strUsage += HelpMessageOpt("-relaypriority", strprintf("Require high priority for relaying free " "or low-fee transactions (default: %d)", DEFAULT_RELAYPRIORITY)); strUsage += HelpMessageOpt( "-maxsigcachesize=", strprintf("Limit size of signature cache to MiB (default: %u)", DEFAULT_MAX_SIG_CACHE_SIZE)); strUsage += HelpMessageOpt( "-maxscriptcachesize=", strprintf("Limit size of script cache to MiB (default: %u)", DEFAULT_MAX_SCRIPT_CACHE_SIZE)); strUsage += HelpMessageOpt( "-maxtipage=", strprintf("Maximum tip age in seconds to consider node in initial " "block download (default: %u)", DEFAULT_MAX_TIP_AGE)); } strUsage += HelpMessageOpt( "-excessutxocharge=", strprintf(_("Fees (in %s/kB) to charge per utxo created for" "relaying, and mining (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_UTXO_FEE))); strUsage += HelpMessageOpt( "-minrelaytxfee=", strprintf( _("Fees (in %s/kB) smaller than this are considered zero fee for " "relaying, mining and transaction creation (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE))); strUsage += HelpMessageOpt( "-maxtxfee=", strprintf(_("Maximum total fees (in %s) to use in a single wallet " "transaction or raw transaction; setting this too low may " "abort large transactions (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_TRANSACTION_MAXFEE))); strUsage += HelpMessageOpt( "-printtoconsole", _("Send trace/debug info to console instead of debug.log file")); if (showDebug) { strUsage += HelpMessageOpt( "-printpriority", strprintf("Log transaction priority and fee per " "kB when mining blocks (default: %d)", DEFAULT_PRINTPRIORITY)); } strUsage += HelpMessageOpt("-shrinkdebugfile", _("Shrink debug.log file on client startup " "(default: 1 when no -debug)")); AppendParamsHelpMessages(strUsage, showDebug); strUsage += HelpMessageGroup(_("Node relay options:")); if (showDebug) { strUsage += HelpMessageOpt( "-acceptnonstdtxn", strprintf( "Relay and mine \"non-standard\" transactions (%sdefault: %u)", "testnet/regtest only; ", defaultChainParams->RequireStandard())); strUsage += HelpMessageOpt("-excessiveblocksize=", strprintf(_("Do not accept blocks larger than this " "limit, in bytes (default: %d)"), DEFAULT_MAX_BLOCK_SIZE)); strUsage += HelpMessageOpt( "-dustrelayfee=", strprintf("Fee rate (in %s/kB) used to defined dust, the value of " "an output such that it will cost about 1/3 of its value " "in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE))); } strUsage += HelpMessageOpt("-bytespersigop", strprintf(_("Equivalent bytes per sigop in transactions " "for relay and mining (default: %u)"), DEFAULT_BYTES_PER_SIGOP)); strUsage += HelpMessageOpt( "-datacarrier", strprintf(_("Relay and mine data carrier transactions (default: %d)"), DEFAULT_ACCEPT_DATACARRIER)); strUsage += HelpMessageOpt( "-datacarriersize", strprintf(_("Maximum size of data in data carrier transactions we " "relay and mine (default: %u)"), MAX_OP_RETURN_RELAY)); strUsage += HelpMessageGroup(_("Block creation options:")); strUsage += HelpMessageOpt( "-blockmaxsize=", strprintf(_("Set maximum block size in bytes (default: %d)"), DEFAULT_MAX_GENERATED_BLOCK_SIZE)); strUsage += HelpMessageOpt( "-blockprioritypercentage=", strprintf(_("Set maximum percentage of a block reserved to " "high-priority/low-fee transactions (default: %d)"), DEFAULT_BLOCK_PRIORITY_PERCENTAGE)); strUsage += HelpMessageOpt( "-blockmintxfee=", strprintf(_("Set lowest fee rate (in %s/kB) for transactions to be " "included in block creation. (default: %s)"), CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE))); if (showDebug) { strUsage += HelpMessageOpt("-blockversion=", "Override block version to test forking scenarios"); } strUsage += HelpMessageGroup(_("RPC server options:")); strUsage += HelpMessageOpt("-server", _("Accept command line and JSON-RPC commands")); strUsage += HelpMessageOpt( "-rest", strprintf(_("Accept public REST requests (default: %d)"), DEFAULT_REST_ENABLE)); strUsage += HelpMessageOpt( "-rpcbind=", _("Bind to given address to listen for JSON-RPC connections. Use " "[host]:port notation for IPv6. This option can be specified " "multiple times (default: bind to all interfaces)")); strUsage += HelpMessageOpt("-rpccookiefile=", _("Location of the auth cookie (default: data dir)")); strUsage += HelpMessageOpt("-rpcuser=", _("Username for JSON-RPC connections")); strUsage += HelpMessageOpt("-rpcpassword=", _("Password for JSON-RPC connections")); strUsage += HelpMessageOpt( "-rpcauth=", _("Username and hashed password for JSON-RPC connections. The field " " comes in the format: :$. A canonical " "python script is included in share/rpcuser. The client then " "connects normally using the " "rpcuser=/rpcpassword= pair of arguments. This " "option can be specified multiple times")); strUsage += HelpMessageOpt( "-rpcport=", strprintf(_("Listen for JSON-RPC connections on (default: %u or " "testnet: %u)"), defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort())); strUsage += HelpMessageOpt( "-rpcallowip=", _("Allow JSON-RPC connections from specified source. Valid for " "are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. " "1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This " "option can be specified multiple times")); strUsage += HelpMessageOpt( "-rpcthreads=", strprintf( _("Set the number of threads to service RPC calls (default: %d)"), DEFAULT_HTTP_THREADS)); strUsage += HelpMessageOpt( "-rpccorsdomain=value", "Domain from which to accept cross origin requests (browser enforced)"); if (showDebug) { strUsage += HelpMessageOpt( "-rpcworkqueue=", strprintf("Set the depth of the work queue to " "service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE)); strUsage += HelpMessageOpt( "-rpcservertimeout=", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT)); } return strUsage; } std::string LicenseInfo() { const std::string URL_SOURCE_CODE = ""; const std::string URL_WEBSITE = ""; return CopyrightHolders( strprintf(_("Copyright (C) %i-%i"), 2009, COPYRIGHT_YEAR) + " ") + "\n" + "\n" + strprintf(_("Please contribute if you find %s useful. " "Visit %s for further information about the software."), PACKAGE_NAME, URL_WEBSITE) + "\n" + strprintf(_("The source code is available from %s."), URL_SOURCE_CODE) + "\n" + "\n" + _("This is experimental software.") + "\n" + strprintf(_("Distributed under the MIT software license, see the " "accompanying file %s or %s"), "COPYING", "") + "\n" + "\n" + strprintf(_("This product includes software developed by the " "OpenSSL Project for use in the OpenSSL Toolkit %s and " "cryptographic software written by Eric Young and UPnP " "software written by Thomas Bernard."), "") + "\n"; } static void BlockNotifyCallback(bool initialSync, const CBlockIndex *pBlockIndex) { if (initialSync || !pBlockIndex) { return; } std::string strCmd = gArgs.GetArg("-blocknotify", ""); boost::replace_all(strCmd, "%s", pBlockIndex->GetBlockHash().GetHex()); boost::thread t(runCommand, strCmd); // thread runs free } static bool fHaveGenesis = false; static boost::mutex cs_GenesisWait; static CConditionVariable condvar_GenesisWait; static void BlockNotifyGenesisWait(bool, const CBlockIndex *pBlockIndex) { if (pBlockIndex != nullptr) { { boost::unique_lock lock_GenesisWait(cs_GenesisWait); fHaveGenesis = true; } condvar_GenesisWait.notify_all(); } } struct CImportingNow { CImportingNow() { assert(fImporting == false); fImporting = true; } ~CImportingNow() { assert(fImporting == true); fImporting = false; } }; // If we're using -prune with -reindex, then delete block files that will be // ignored by the reindex. Since reindexing works by starting at block file 0 // and looping until a blockfile is missing, do the same here to delete any // later block files after a gap. Also delete all rev files since they'll be // rewritten by the reindex anyway. This ensures that vinfoBlockFile is in sync // with what's actually on disk by the time we start downloading, so that // pruning works correctly. void CleanupBlockRevFiles() { std::map mapBlockFiles; // Glob all blk?????.dat and rev?????.dat files from the blocks directory. // Remove the rev files immediately and insert the blk file paths into an // ordered map keyed by block file index. LogPrintf("Removing unusable blk?????.dat and rev?????.dat files for " "-reindex with -prune\n"); fs::path blocksdir = GetDataDir() / "blocks"; for (fs::directory_iterator it(blocksdir); it != fs::directory_iterator(); it++) { if (is_regular_file(*it) && it->path().filename().string().length() == 12 && it->path().filename().string().substr(8, 4) == ".dat") { if (it->path().filename().string().substr(0, 3) == "blk") { mapBlockFiles[it->path().filename().string().substr(3, 5)] = it->path(); } else if (it->path().filename().string().substr(0, 3) == "rev") { remove(it->path()); } } } // Remove all block files that aren't part of a contiguous set starting at // zero by walking the ordered map (keys are block file indices) by keeping // a separate counter. Once we hit a gap (or if 0 doesn't exist) start // removing block files. int nContigCounter = 0; for (const std::pair &item : mapBlockFiles) { if (atoi(item.first) == nContigCounter) { nContigCounter++; continue; } remove(item.second); } } void ThreadImport(const Config &config, std::vector vImportFiles) { RenameThread("bitcoin-loadblk"); { CImportingNow imp; // -reindex if (fReindex) { int nFile = 0; while (true) { CDiskBlockPos pos(nFile, 0); if (!fs::exists(GetBlockPosFilename(pos, "blk"))) { // No block files left to reindex break; } FILE *file = OpenBlockFile(pos, true); if (!file) { // This error is logged in OpenBlockFile break; } LogPrintf("Reindexing block file blk%05u.dat...\n", (unsigned int)nFile); LoadExternalBlockFile(config, file, &pos); nFile++; } pblocktree->WriteReindexing(false); fReindex = false; LogPrintf("Reindexing finished\n"); // To avoid ending up in a situation without genesis block, re-try // initializing (no-op if reindexing worked): InitBlockIndex(config); } // hardcoded $DATADIR/bootstrap.dat fs::path pathBootstrap = GetDataDir() / "bootstrap.dat"; if (fs::exists(pathBootstrap)) { FILE *file = fsbridge::fopen(pathBootstrap, "rb"); if (file) { fs::path pathBootstrapOld = GetDataDir() / "bootstrap.dat.old"; LogPrintf("Importing bootstrap.dat...\n"); LoadExternalBlockFile(config, file); RenameOver(pathBootstrap, pathBootstrapOld); } else { LogPrintf("Warning: Could not open bootstrap file %s\n", pathBootstrap.string()); } } // -loadblock= for (const fs::path &path : vImportFiles) { FILE *file = fsbridge::fopen(path, "rb"); if (file) { LogPrintf("Importing blocks file %s...\n", path.string()); LoadExternalBlockFile(config, file); } else { LogPrintf("Warning: Could not open blocks file %s\n", path.string()); } } // scan for better chains in the block chain database, that are not yet // connected in the active best chain CValidationState state; if (!ActivateBestChain(config, state)) { LogPrintf("Failed to connect best block"); StartShutdown(); } if (gArgs.GetBoolArg("-stopafterblockimport", DEFAULT_STOPAFTERBLOCKIMPORT)) { LogPrintf("Stopping after block import\n"); StartShutdown(); } } // End scope of CImportingNow if (gArgs.GetArg("-persistmempool", DEFAULT_PERSIST_MEMPOOL)) { LoadMempool(config); fDumpMempoolLater = !fRequestShutdown; } } /** Sanity checks * Ensure that Bitcoin is running in a usable environment with all * necessary library support. */ bool InitSanityCheck(void) { if (!ECC_InitSanityCheck()) { InitError( "Elliptic curve cryptography sanity check failure. Aborting."); return false; } if (!glibc_sanity_test() || !glibcxx_sanity_test()) { return false; } if (!Random_SanityCheck()) { InitError("OS cryptographic RNG sanity check failure. Aborting."); return false; } return true; } static bool AppInitServers(Config &config, boost::thread_group &threadGroup) { RPCServerSignals::OnStarted(&OnRPCStarted); RPCServerSignals::OnStopped(&OnRPCStopped); RPCServerSignals::OnPreCommand(&OnRPCPreCommand); if (!InitHTTPServer(config)) { return false; } if (!StartRPC()) { return false; } - if (!StartHTTPRPC()) { + if (!StartHTTPRPC(config)) { return false; } if (gArgs.GetBoolArg("-rest", DEFAULT_REST_ENABLE) && !StartREST()) { return false; } if (!StartHTTPServer()) { return false; } return true; } // Parameter interaction based on rules void InitParameterInteraction() { // when specifying an explicit binding address, you want to listen on it // even when -connect or -proxy is specified. if (gArgs.IsArgSet("-bind")) { if (gArgs.SoftSetBoolArg("-listen", true)) { LogPrintf( "%s: parameter interaction: -bind set -> setting -listen=1\n", __func__); } } if (gArgs.IsArgSet("-whitebind")) { if (gArgs.SoftSetBoolArg("-listen", true)) { LogPrintf("%s: parameter interaction: -whitebind set -> setting " "-listen=1\n", __func__); } } if (gArgs.IsArgSet("-connect")) { // when only connecting to trusted nodes, do not seed via DNS, or listen // by default. if (gArgs.SoftSetBoolArg("-dnsseed", false)) { LogPrintf("%s: parameter interaction: -connect set -> setting " "-dnsseed=0\n", __func__); } if (gArgs.SoftSetBoolArg("-listen", false)) { LogPrintf("%s: parameter interaction: -connect set -> setting " "-listen=0\n", __func__); } } if (gArgs.IsArgSet("-proxy")) { // to protect privacy, do not listen by default if a default proxy // server is specified. if (gArgs.SoftSetBoolArg("-listen", false)) { LogPrintf( "%s: parameter interaction: -proxy set -> setting -listen=0\n", __func__); } // to protect privacy, do not use UPNP when a proxy is set. The user may // still specify -listen=1 to listen locally, so don't rely on this // happening through -listen below. if (gArgs.SoftSetBoolArg("-upnp", false)) { LogPrintf( "%s: parameter interaction: -proxy set -> setting -upnp=0\n", __func__); } // to protect privacy, do not discover addresses by default if (gArgs.SoftSetBoolArg("-discover", false)) { LogPrintf("%s: parameter interaction: -proxy set -> setting " "-discover=0\n", __func__); } } if (!gArgs.GetBoolArg("-listen", DEFAULT_LISTEN)) { // do not map ports or try to retrieve public IP when not listening // (pointless) if (gArgs.SoftSetBoolArg("-upnp", false)) { LogPrintf( "%s: parameter interaction: -listen=0 -> setting -upnp=0\n", __func__); } if (gArgs.SoftSetBoolArg("-discover", false)) { LogPrintf( "%s: parameter interaction: -listen=0 -> setting -discover=0\n", __func__); } if (gArgs.SoftSetBoolArg("-listenonion", false)) { LogPrintf("%s: parameter interaction: -listen=0 -> setting " "-listenonion=0\n", __func__); } } if (gArgs.IsArgSet("-externalip")) { // if an explicit public IP is specified, do not try to find others if (gArgs.SoftSetBoolArg("-discover", false)) { LogPrintf("%s: parameter interaction: -externalip set -> setting " "-discover=0\n", __func__); } } // disable whitelistrelay in blocksonly mode if (gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY)) { if (gArgs.SoftSetBoolArg("-whitelistrelay", false)) { LogPrintf("%s: parameter interaction: -blocksonly=1 -> setting " "-whitelistrelay=0\n", __func__); } } // Forcing relay from whitelisted hosts implies we will accept relays from // them in the first place. if (gArgs.GetBoolArg("-whitelistforcerelay", DEFAULT_WHITELISTFORCERELAY)) { if (gArgs.SoftSetBoolArg("-whitelistrelay", true)) { LogPrintf("%s: parameter interaction: -whitelistforcerelay=1 -> " "setting -whitelistrelay=1\n", __func__); } } } static std::string ResolveErrMsg(const char *const optname, const std::string &strBind) { return strprintf(_("Cannot resolve -%s address: '%s'"), optname, strBind); } void InitLogging() { BCLog::Logger &logger = GetLogger(); logger.fPrintToConsole = gArgs.GetBoolArg("-printtoconsole", false); logger.fLogTimestamps = gArgs.GetBoolArg("-logtimestamps", DEFAULT_LOGTIMESTAMPS); logger.fLogTimeMicros = gArgs.GetBoolArg("-logtimemicros", DEFAULT_LOGTIMEMICROS); fLogIPs = gArgs.GetBoolArg("-logips", DEFAULT_LOGIPS); LogPrintf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"); LogPrintf("%s version %s\n", CLIENT_NAME, FormatFullVersion()); } namespace { // Variables internal to initialization process only ServiceFlags nRelevantServices = NODE_NETWORK; int nMaxConnections; int nUserMaxConnections; int nFD; ServiceFlags nLocalServices = NODE_NETWORK; } // namespace [[noreturn]] static void new_handler_terminate() { // Rather than throwing std::bad-alloc if allocation fails, terminate // immediately to (try to) avoid chain corruption. Since LogPrintf may // itself allocate memory, set the handler directly to terminate first. std::set_new_handler(std::terminate); LogPrintf("Error: Out of memory. Terminating.\n"); // The log was successful, terminate now. std::terminate(); }; bool AppInitBasicSetup() { // Step 1: setup #ifdef _MSC_VER // Turn off Microsoft heap dump noise _CrtSetReportMode(_CRT_WARN, _CRTDBG_MODE_FILE); _CrtSetReportFile(_CRT_WARN, CreateFileA("NUL", GENERIC_WRITE, 0, nullptr, OPEN_EXISTING, 0, 0)); #endif #if _MSC_VER >= 1400 // Disable confusing "helpful" text message on abort, Ctrl-C _set_abort_behavior(0, _WRITE_ABORT_MSG | _CALL_REPORTFAULT); #endif #ifdef WIN32 // Enable Data Execution Prevention (DEP) // Minimum supported OS versions: WinXP SP3, WinVista >= SP1, Win Server 2008 // A failure is non-critical and needs no further attention! #ifndef PROCESS_DEP_ENABLE // We define this here, because GCCs winbase.h limits this to _WIN32_WINNT >= // 0x0601 (Windows 7), which is not correct. Can be removed, when GCCs winbase.h // is fixed! #define PROCESS_DEP_ENABLE 0x00000001 #endif typedef BOOL(WINAPI * PSETPROCDEPPOL)(DWORD); PSETPROCDEPPOL setProcDEPPol = (PSETPROCDEPPOL)GetProcAddress( GetModuleHandleA("Kernel32.dll"), "SetProcessDEPPolicy"); if (setProcDEPPol != nullptr) { setProcDEPPol(PROCESS_DEP_ENABLE); } #endif if (!SetupNetworking()) { return InitError("Initializing networking failed"); } #ifndef WIN32 if (!gArgs.GetBoolArg("-sysperms", false)) { umask(077); } // Clean shutdown on SIGTERM struct sigaction sa; sa.sa_handler = HandleSIGTERM; sigemptyset(&sa.sa_mask); sa.sa_flags = 0; sigaction(SIGTERM, &sa, nullptr); sigaction(SIGINT, &sa, nullptr); // Reopen debug.log on SIGHUP struct sigaction sa_hup; sa_hup.sa_handler = HandleSIGHUP; sigemptyset(&sa_hup.sa_mask); sa_hup.sa_flags = 0; sigaction(SIGHUP, &sa_hup, nullptr); // Ignore SIGPIPE, otherwise it will bring the daemon down if the client // closes unexpectedly signal(SIGPIPE, SIG_IGN); #endif std::set_new_handler(new_handler_terminate); return true; } bool AppInitParameterInteraction(Config &config) { const CChainParams &chainparams = config.GetChainParams(); // Step 2: parameter interactions // also see: InitParameterInteraction() // if using block pruning, then disallow txindex if (gArgs.GetArg("-prune", 0)) { if (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) { return InitError(_("Prune mode is incompatible with -txindex.")); } } // if space reserved for high priority transactions is misconfigured // stop program execution and warn the user with a proper error message const int64_t blkprio = gArgs.GetArg("-blockprioritypercentage", DEFAULT_BLOCK_PRIORITY_PERCENTAGE); if (!config.SetBlockPriorityPercentage(blkprio)) { return InitError(_("Block priority percentage has to belong to the " "[0..100] interval.")); } // Make sure enough file descriptors are available int nBind = std::max( (gArgs.IsArgSet("-bind") ? gArgs.GetArgs("-bind").size() : 0) + (gArgs.IsArgSet("-whitebind") ? gArgs.GetArgs("-whitebind").size() : 0), size_t(1)); nUserMaxConnections = gArgs.GetArg("-maxconnections", DEFAULT_MAX_PEER_CONNECTIONS); nMaxConnections = std::max(nUserMaxConnections, 0); // Trim requested connection counts, to fit into system limitations nMaxConnections = std::max(std::min(nMaxConnections, (int)(FD_SETSIZE - nBind - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS)), 0); nFD = RaiseFileDescriptorLimit(nMaxConnections + MIN_CORE_FILEDESCRIPTORS + MAX_ADDNODE_CONNECTIONS); if (nFD < MIN_CORE_FILEDESCRIPTORS) { return InitError(_("Not enough file descriptors available.")); } nMaxConnections = std::min(nFD - MIN_CORE_FILEDESCRIPTORS - MAX_ADDNODE_CONNECTIONS, nMaxConnections); if (nMaxConnections < nUserMaxConnections) { InitWarning(strprintf(_("Reducing -maxconnections from %d to %d, " "because of system limitations."), nUserMaxConnections, nMaxConnections)); } // Step 3: parameter-to-internal-flags if (gArgs.IsArgSet("-debug")) { // Special-case: if -debug=0/-nodebug is set, turn off debugging // messages const std::vector &categories = gArgs.GetArgs("-debug"); if (find(categories.begin(), categories.end(), std::string("0")) == categories.end()) { for (const auto &cat : categories) { BCLog::LogFlags flag; if (!GetLogCategory(flag, cat)) { InitWarning( strprintf(_("Unsupported logging category %s=%s."), "-debug", cat)); } GetLogger().EnableCategory(flag); } } } // Now remove the logging categories which were explicitly excluded if (gArgs.IsArgSet("-debugexclude")) { for (const std::string &cat : gArgs.GetArgs("-debugexclude")) { BCLog::LogFlags flag; if (!GetLogCategory(flag, cat)) { InitWarning(strprintf(_("Unsupported logging category %s=%s."), "-debugexclude", cat)); } GetLogger().DisableCategory(flag); } } // Check for -debugnet if (gArgs.GetBoolArg("-debugnet", false)) { InitWarning( _("Unsupported argument -debugnet ignored, use -debug=net.")); } // Check for -socks - as this is a privacy risk to continue, exit here if (gArgs.IsArgSet("-socks")) { return InitError( _("Unsupported argument -socks found. Setting SOCKS version isn't " "possible anymore, only SOCKS5 proxies are supported.")); } // Check for -tor - as this is a privacy risk to continue, exit here if (gArgs.GetBoolArg("-tor", false)) { return InitError(_("Unsupported argument -tor found, use -onion.")); } if (gArgs.GetBoolArg("-benchmark", false)) { InitWarning( _("Unsupported argument -benchmark ignored, use -debug=bench.")); } if (gArgs.GetBoolArg("-whitelistalwaysrelay", false)) { InitWarning(_("Unsupported argument -whitelistalwaysrelay ignored, use " "-whitelistrelay and/or -whitelistforcerelay.")); } if (gArgs.IsArgSet("-blockminsize")) { InitWarning("Unsupported argument -blockminsize ignored."); } // Checkmempool and checkblockindex default to true in regtest mode int ratio = std::min( std::max( gArgs.GetArg("-checkmempool", chainparams.DefaultConsistencyChecks() ? 1 : 0), 0), 1000000); if (ratio != 0) { mempool.setSanityCheck(1.0 / ratio); } fCheckBlockIndex = gArgs.GetBoolArg("-checkblockindex", chainparams.DefaultConsistencyChecks()); fCheckpointsEnabled = gArgs.GetBoolArg("-checkpoints", DEFAULT_CHECKPOINTS_ENABLED); hashAssumeValid = uint256S( gArgs.GetArg("-assumevalid", chainparams.GetConsensus().defaultAssumeValid.GetHex())); if (!hashAssumeValid.IsNull()) { LogPrintf("Assuming ancestors of block %s have valid signatures.\n", hashAssumeValid.GetHex()); } else { LogPrintf("Validating signatures for all blocks.\n"); } if (gArgs.IsArgSet("-minimumchainwork")) { const std::string minChainWorkStr = gArgs.GetArg("-minimumchainwork", ""); if (!IsHexNumber(minChainWorkStr)) { return InitError(strprintf( "Invalid non-hex (%s) minimum chain work value specified", minChainWorkStr)); } nMinimumChainWork = UintToArith256(uint256S(minChainWorkStr)); } else { nMinimumChainWork = UintToArith256(chainparams.GetConsensus().nMinimumChainWork); } LogPrintf("Setting nMinimumChainWork=%s\n", nMinimumChainWork.GetHex()); if (nMinimumChainWork < UintToArith256(chainparams.GetConsensus().nMinimumChainWork)) { LogPrintf("Warning: nMinimumChainWork set below default value of %s\n", chainparams.GetConsensus().nMinimumChainWork.GetHex()); } // mempool limits int64_t nMempoolSizeMax = gArgs.GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000; int64_t nMempoolSizeMin = gArgs.GetArg("-limitdescendantsize", DEFAULT_DESCENDANT_SIZE_LIMIT) * 1000 * 40; if (nMempoolSizeMax < 0 || nMempoolSizeMax < nMempoolSizeMin) { return InitError(strprintf(_("-maxmempool must be at least %d MB"), std::ceil(nMempoolSizeMin / 1000000.0))); } // -par=0 means autodetect, but nScriptCheckThreads==0 means no concurrency nScriptCheckThreads = gArgs.GetArg("-par", DEFAULT_SCRIPTCHECK_THREADS); if (nScriptCheckThreads <= 0) { nScriptCheckThreads += GetNumCores(); } if (nScriptCheckThreads <= 1) { nScriptCheckThreads = 0; } else if (nScriptCheckThreads > MAX_SCRIPTCHECK_THREADS) { nScriptCheckThreads = MAX_SCRIPTCHECK_THREADS; } // Configure excessive block size. const uint64_t nProposedExcessiveBlockSize = gArgs.GetArg("-excessiveblocksize", DEFAULT_MAX_BLOCK_SIZE); if (!config.SetMaxBlockSize(nProposedExcessiveBlockSize)) { return InitError( _("Excessive block size must be > 1,000,000 bytes (1MB)")); } // Check blockmaxsize does not exceed maximum accepted block size. const uint64_t nProposedMaxGeneratedBlockSize = gArgs.GetArg("-blockmaxsize", DEFAULT_MAX_GENERATED_BLOCK_SIZE); if (nProposedMaxGeneratedBlockSize > config.GetMaxBlockSize()) { auto msg = _("Max generated block size (blockmaxsize) cannot exceed " "the excessive block size (excessiveblocksize)"); return InitError(msg); } // block pruning; get the amount of disk space (in MiB) to allot for block & // undo files int64_t nPruneArg = gArgs.GetArg("-prune", 0); if (nPruneArg < 0) { return InitError( _("Prune cannot be configured with a negative value.")); } nPruneTarget = (uint64_t)nPruneArg * 1024 * 1024; if (nPruneArg == 1) { // manual pruning: -prune=1 LogPrintf("Block pruning enabled. Use RPC call " "pruneblockchain(height) to manually prune block and undo " "files.\n"); nPruneTarget = std::numeric_limits::max(); fPruneMode = true; } else if (nPruneTarget) { if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) { return InitError( strprintf(_("Prune configured below the minimum of %d MiB. " "Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024)); } LogPrintf("Prune configured to target %uMiB on disk for block and undo " "files.\n", nPruneTarget / 1024 / 1024); fPruneMode = true; } RegisterAllRPCCommands(tableRPC); #ifdef ENABLE_WALLET RegisterWalletRPCCommands(tableRPC); RegisterDumpRPCCommands(tableRPC); #endif nConnectTimeout = gArgs.GetArg("-timeout", DEFAULT_CONNECT_TIMEOUT); if (nConnectTimeout <= 0) { nConnectTimeout = DEFAULT_CONNECT_TIMEOUT; } // Obtain the amount to charge excess UTXO if (gArgs.IsArgSet("-excessutxocharge")) { Amount n = Amount::zero(); auto parsed = ParseMoney(gArgs.GetArg("-excessutxocharge", ""), n); if (!parsed || Amount::zero() > n) { return InitError(AmountErrMsg( "excessutxocharge", gArgs.GetArg("-excessutxocharge", ""))); } config.SetExcessUTXOCharge(n); } else { config.SetExcessUTXOCharge(DEFAULT_UTXO_FEE); } // Fee-per-kilobyte amount considered the same as "free". If you are mining, // be careful setting this: if you set it to zero then a transaction spammer // can cheaply fill blocks using 1-satoshi-fee transactions. It should be // set above the real cost to you of processing a transaction. if (gArgs.IsArgSet("-minrelaytxfee")) { Amount n = Amount::zero(); auto parsed = ParseMoney(gArgs.GetArg("-minrelaytxfee", ""), n); if (!parsed || Amount::zero() == n) { return InitError(AmountErrMsg("minrelaytxfee", gArgs.GetArg("-minrelaytxfee", ""))); } // High fee check is done afterward in CWallet::ParameterInteraction() config.SetMinFeePerKB(CFeeRate(n)); } else { config.SetMinFeePerKB(CFeeRate(DEFAULT_MIN_RELAY_TX_FEE)); } // Sanity check argument for min fee for including tx in block // TODO: Harmonize which arguments need sanity checking and where that // happens. if (gArgs.IsArgSet("-blockmintxfee")) { Amount n = Amount::zero(); if (!ParseMoney(gArgs.GetArg("-blockmintxfee", ""), n)) { return InitError(AmountErrMsg("blockmintxfee", gArgs.GetArg("-blockmintxfee", ""))); } } // Feerate used to define dust. Shouldn't be changed lightly as old // implementations may inadvertently create non-standard transactions. if (gArgs.IsArgSet("-dustrelayfee")) { Amount n = Amount::zero(); auto parsed = ParseMoney(gArgs.GetArg("-dustrelayfee", ""), n); if (!parsed || Amount::zero() == n) { return InitError(AmountErrMsg("dustrelayfee", gArgs.GetArg("-dustrelayfee", ""))); } dustRelayFee = CFeeRate(n); } fRequireStandard = !gArgs.GetBoolArg("-acceptnonstdtxn", !chainparams.RequireStandard()); if (chainparams.RequireStandard() && !fRequireStandard) { return InitError( strprintf("acceptnonstdtxn is not currently supported for %s chain", chainparams.NetworkIDString())); } nBytesPerSigOp = gArgs.GetArg("-bytespersigop", nBytesPerSigOp); #ifdef ENABLE_WALLET if (!CWallet::ParameterInteraction()) { return false; } #endif fIsBareMultisigStd = gArgs.GetBoolArg("-permitbaremultisig", DEFAULT_PERMIT_BAREMULTISIG); fAcceptDatacarrier = gArgs.GetBoolArg("-datacarrier", DEFAULT_ACCEPT_DATACARRIER); // Option to startup with mocktime set (used for regression testing): SetMockTime(gArgs.GetArg("-mocktime", 0)); // SetMockTime(0) is a no-op if (gArgs.GetBoolArg("-peerbloomfilters", DEFAULT_PEERBLOOMFILTERS)) { nLocalServices = ServiceFlags(nLocalServices | NODE_BLOOM); } // Signal Bitcoin Cash support. // TODO: remove some time after the hardfork when no longer needed // to differentiate the network nodes. nLocalServices = ServiceFlags(nLocalServices | NODE_BITCOIN_CASH); nMaxTipAge = gArgs.GetArg("-maxtipage", DEFAULT_MAX_TIP_AGE); return true; } static bool LockDataDirectory(bool probeOnly) { std::string strDataDir = GetDataDir().string(); // Make sure only a single Bitcoin process is using the data directory. fs::path pathLockFile = GetDataDir() / ".lock"; // empty lock file; created if it doesn't exist. FILE *file = fsbridge::fopen(pathLockFile, "a"); if (file) { fclose(file); } try { static boost::interprocess::file_lock lock( pathLockFile.string().c_str()); if (!lock.try_lock()) { return InitError( strprintf(_("Cannot obtain a lock on data directory %s. %s is " "probably already running."), strDataDir, _(PACKAGE_NAME))); } if (probeOnly) { lock.unlock(); } } catch (const boost::interprocess::interprocess_exception &e) { return InitError(strprintf(_("Cannot obtain a lock on data directory " "%s. %s is probably already running.") + " %s.", strDataDir, _(PACKAGE_NAME), e.what())); } return true; } bool AppInitSanityChecks() { // Step 4: sanity checks // Initialize elliptic curve code std::string sha256_algo = SHA256AutoDetect(); LogPrintf("Using the '%s' SHA256 implementation\n", sha256_algo); RandomInit(); ECC_Start(); globalVerifyHandle.reset(new ECCVerifyHandle()); // Sanity check if (!InitSanityCheck()) { return InitError(strprintf( _("Initialization sanity check failed. %s is shutting down."), _(PACKAGE_NAME))); } // Probe the data directory lock to give an early error message, if possible return LockDataDirectory(true); } bool AppInitMain(Config &config, boost::thread_group &threadGroup, CScheduler &scheduler) { const CChainParams &chainparams = config.GetChainParams(); // Step 4a: application initialization // After daemonization get the data directory lock again and hold on to it // until exit. This creates a slight window for a race condition to happen, // however this condition is harmless: it will at most make us exit without // printing a message to console. if (!LockDataDirectory(false)) { // Detailed error printed inside LockDataDirectory return false; } #ifndef WIN32 CreatePidFile(GetPidFile(), getpid()); #endif BCLog::Logger &logger = GetLogger(); bool default_shrinkdebugfile = logger.DefaultShrinkDebugFile(); if (gArgs.GetBoolArg("-shrinkdebugfile", default_shrinkdebugfile)) { // Do this first since it both loads a bunch of debug.log into memory, // and because this needs to happen before any other debug.log printing. logger.ShrinkDebugFile(); } if (logger.fPrintToDebugLog) { logger.OpenDebugLog(); } if (!logger.fLogTimestamps) { LogPrintf("Startup time: %s\n", DateTimeStrFormat("%Y-%m-%d %H:%M:%S", GetTime())); } LogPrintf("Default data directory %s\n", GetDefaultDataDir().string()); LogPrintf("Using data directory %s\n", GetDataDir().string()); LogPrintf( "Using config file %s\n", GetConfigFile(gArgs.GetArg("-conf", BITCOIN_CONF_FILENAME)).string()); LogPrintf("Using at most %i automatic connections (%i file descriptors " "available)\n", nMaxConnections, nFD); InitSignatureCache(); InitScriptExecutionCache(); LogPrintf("Using %u threads for script verification\n", nScriptCheckThreads); if (nScriptCheckThreads) { for (int i = 0; i < nScriptCheckThreads - 1; i++) { threadGroup.create_thread(&ThreadScriptCheck); } } // Start the lightweight task scheduler thread CScheduler::Function serviceLoop = boost::bind(&CScheduler::serviceQueue, &scheduler); threadGroup.create_thread(boost::bind(&TraceThread, "scheduler", serviceLoop)); /** * Start the RPC server. It will be started in "warmup" mode and not * process calls yet (but it will verify that the server is there and will * be ready later). Warmup mode will be completed when initialisation is * finished. */ if (gArgs.GetBoolArg("-server", false)) { uiInterface.InitMessage.connect(SetRPCWarmupStatus); if (!AppInitServers(config, threadGroup)) { return InitError( _("Unable to start HTTP server. See debug log for details.")); } } // Step 5: verify wallet database integrity #ifdef ENABLE_WALLET if (!CWallet::Verify(chainparams)) { return false; } #endif // Step 6: network initialization // Note that we absolutely cannot open any actual connections // until the very end ("start node") as the UTXO/block state // is not yet setup and may end up being set up twice if we // need to reindex later. assert(!g_connman); g_connman = std::unique_ptr( new CConnman(config, GetRand(std::numeric_limits::max()), GetRand(std::numeric_limits::max()))); CConnman &connman = *g_connman; peerLogic.reset(new PeerLogicValidation(&connman)); RegisterValidationInterface(peerLogic.get()); RegisterNodeSignals(GetNodeSignals()); if (gArgs.IsArgSet("-onlynet")) { std::set nets; for (const std::string &snet : gArgs.GetArgs("-onlynet")) { enum Network net = ParseNetwork(snet); if (net == NET_UNROUTABLE) { return InitError(strprintf( _("Unknown network specified in -onlynet: '%s'"), snet)); } nets.insert(net); } for (int n = 0; n < NET_MAX; n++) { enum Network net = (enum Network)n; if (!nets.count(net)) SetLimited(net); } } if (gArgs.IsArgSet("-whitelist")) { for (const std::string &net : gArgs.GetArgs("-whitelist")) { CSubNet subnet; LookupSubNet(net.c_str(), subnet); if (!subnet.IsValid()) { return InitError(strprintf( _("Invalid netmask specified in -whitelist: '%s'"), net)); } connman.AddWhitelistedRange(subnet); } } bool proxyRandomize = gArgs.GetBoolArg("-proxyrandomize", DEFAULT_PROXYRANDOMIZE); // -proxy sets a proxy for all outgoing network traffic // -noproxy (or -proxy=0) as well as the empty string can be used to not set // a proxy, this is the default std::string proxyArg = gArgs.GetArg("-proxy", ""); SetLimited(NET_TOR); if (proxyArg != "" && proxyArg != "0") { CService resolved(LookupNumeric(proxyArg.c_str(), 9050)); proxyType addrProxy = proxyType(resolved, proxyRandomize); if (!addrProxy.IsValid()) { return InitError( strprintf(_("Invalid -proxy address: '%s'"), proxyArg)); } SetProxy(NET_IPV4, addrProxy); SetProxy(NET_IPV6, addrProxy); SetProxy(NET_TOR, addrProxy); SetNameProxy(addrProxy); // by default, -proxy sets onion as reachable, unless -noonion later SetLimited(NET_TOR, false); } // -onion can be used to set only a proxy for .onion, or override normal // proxy for .onion addresses. // -noonion (or -onion=0) disables connecting to .onion entirely. An empty // string is used to not override the onion proxy (in which case it defaults // to -proxy set above, or none) std::string onionArg = gArgs.GetArg("-onion", ""); if (onionArg != "") { if (onionArg == "0") { // Handle -noonion/-onion=0 SetLimited(NET_TOR); // set onions as unreachable } else { CService resolved(LookupNumeric(onionArg.c_str(), 9050)); proxyType addrOnion = proxyType(resolved, proxyRandomize); if (!addrOnion.IsValid()) { return InitError( strprintf(_("Invalid -onion address: '%s'"), onionArg)); } SetProxy(NET_TOR, addrOnion); SetLimited(NET_TOR, false); } } // see Step 2: parameter interactions for more information about these fListen = gArgs.GetBoolArg("-listen", DEFAULT_LISTEN); fDiscover = gArgs.GetBoolArg("-discover", true); fNameLookup = gArgs.GetBoolArg("-dns", DEFAULT_NAME_LOOKUP); fRelayTxes = !gArgs.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY); if (fListen) { bool fBound = false; if (gArgs.IsArgSet("-bind")) { for (const std::string &strBind : gArgs.GetArgs("-bind")) { CService addrBind; if (!Lookup(strBind.c_str(), addrBind, GetListenPort(), false)) { return InitError(ResolveErrMsg("bind", strBind)); } fBound |= Bind(connman, addrBind, (BF_EXPLICIT | BF_REPORT_ERROR)); } } if (gArgs.IsArgSet("-whitebind")) { for (const std::string &strBind : gArgs.GetArgs("-whitebind")) { CService addrBind; if (!Lookup(strBind.c_str(), addrBind, 0, false)) { return InitError(ResolveErrMsg("whitebind", strBind)); } if (addrBind.GetPort() == 0) { return InitError(strprintf( _("Need to specify a port with -whitebind: '%s'"), strBind)); } fBound |= Bind(connman, addrBind, (BF_EXPLICIT | BF_REPORT_ERROR | BF_WHITELIST)); } } if (!gArgs.IsArgSet("-bind") && !gArgs.IsArgSet("-whitebind")) { struct in_addr inaddr_any; inaddr_any.s_addr = INADDR_ANY; fBound |= Bind(connman, CService(in6addr_any, GetListenPort()), BF_NONE); fBound |= Bind(connman, CService(inaddr_any, GetListenPort()), !fBound ? BF_REPORT_ERROR : BF_NONE); } if (!fBound) { return InitError(_("Failed to listen on any port. Use -listen=0 if " "you want this.")); } } if (gArgs.IsArgSet("-externalip")) { for (const std::string &strAddr : gArgs.GetArgs("-externalip")) { CService addrLocal; if (Lookup(strAddr.c_str(), addrLocal, GetListenPort(), fNameLookup) && addrLocal.IsValid()) { AddLocal(addrLocal, LOCAL_MANUAL); } else { return InitError(ResolveErrMsg("externalip", strAddr)); } } } if (gArgs.IsArgSet("-seednode")) { for (const std::string &strDest : gArgs.GetArgs("-seednode")) { connman.AddOneShot(strDest); } } #if ENABLE_ZMQ pzmqNotificationInterface = CZMQNotificationInterface::Create(); if (pzmqNotificationInterface) { RegisterValidationInterface(pzmqNotificationInterface); } #endif // unlimited unless -maxuploadtarget is set uint64_t nMaxOutboundLimit = 0; uint64_t nMaxOutboundTimeframe = MAX_UPLOAD_TIMEFRAME; if (gArgs.IsArgSet("-maxuploadtarget")) { nMaxOutboundLimit = gArgs.GetArg("-maxuploadtarget", DEFAULT_MAX_UPLOAD_TARGET) * 1024 * 1024; } // Step 7: load block chain fReindex = gArgs.GetBoolArg("-reindex", false); bool fReindexChainState = gArgs.GetBoolArg("-reindex-chainstate", false); // cache size calculations int64_t nTotalCache = (gArgs.GetArg("-dbcache", nDefaultDbCache) << 20); // total cache cannot be less than nMinDbCache nTotalCache = std::max(nTotalCache, nMinDbCache << 20); // total cache cannot be greater than nMaxDbcache nTotalCache = std::min(nTotalCache, nMaxDbCache << 20); int64_t nBlockTreeDBCache = nTotalCache / 8; nBlockTreeDBCache = std::min(nBlockTreeDBCache, (gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX) ? nMaxBlockDBAndTxIndexCache : nMaxBlockDBCache) << 20); nTotalCache -= nBlockTreeDBCache; // use 25%-50% of the remainder for disk cache int64_t nCoinDBCache = std::min(nTotalCache / 2, (nTotalCache / 4) + (1 << 23)); // cap total coins db cache nCoinDBCache = std::min(nCoinDBCache, nMaxCoinsDBCache << 20); nTotalCache -= nCoinDBCache; // the rest goes to in-memory cache nCoinCacheUsage = nTotalCache; int64_t nMempoolSizeMax = gArgs.GetArg("-maxmempool", DEFAULT_MAX_MEMPOOL_SIZE) * 1000000; LogPrintf("Cache configuration:\n"); LogPrintf("* Using %.1fMiB for block index database\n", nBlockTreeDBCache * (1.0 / 1024 / 1024)); LogPrintf("* Using %.1fMiB for chain state database\n", nCoinDBCache * (1.0 / 1024 / 1024)); LogPrintf("* Using %.1fMiB for in-memory UTXO set (plus up to %.1fMiB of " "unused mempool space)\n", nCoinCacheUsage * (1.0 / 1024 / 1024), nMempoolSizeMax * (1.0 / 1024 / 1024)); int64_t nStart = 0; bool fLoaded = false; while (!fLoaded && !fRequestShutdown) { bool fReset = fReindex; std::string strLoadError; uiInterface.InitMessage(_("Loading block index...")); nStart = GetTimeMillis(); do { try { UnloadBlockIndex(); delete pcoinsTip; delete pcoinsdbview; delete pcoinscatcher; delete pblocktree; pblocktree = new CBlockTreeDB(nBlockTreeDBCache, false, fReindex); pcoinsdbview = new CCoinsViewDB(nCoinDBCache, false, fReindex || fReindexChainState); pcoinscatcher = new CCoinsViewErrorCatcher(pcoinsdbview); if (fReindex) { pblocktree->WriteReindexing(true); // If we're reindexing in prune mode, wipe away unusable // block files and all undo data files if (fPruneMode) { CleanupBlockRevFiles(); } } else if (!pcoinsdbview->Upgrade()) { strLoadError = _("Error upgrading chainstate database"); break; } if (fRequestShutdown) { break; } if (!LoadBlockIndex(config)) { strLoadError = _("Error loading block database"); break; } // If the loaded chain has a wrong genesis, bail out immediately // (we're likely using a testnet datadir, or the other way // around). if (!mapBlockIndex.empty() && mapBlockIndex.count( chainparams.GetConsensus().hashGenesisBlock) == 0) { return InitError(_("Incorrect or no genesis block found. " "Wrong datadir for network?")); } // Initialize the block index (no-op if non-empty database was // already loaded) if (!InitBlockIndex(config)) { strLoadError = _("Error initializing block database"); break; } // Check for changed -txindex state if (fTxIndex != gArgs.GetBoolArg("-txindex", DEFAULT_TXINDEX)) { strLoadError = _("You need to rebuild the database using " "-reindex-chainstate to change -txindex"); break; } // Check for changed -prune state. What we are concerned about // is a user who has pruned blocks in the past, but is now // trying to run unpruned. if (fHavePruned && !fPruneMode) { strLoadError = _("You need to rebuild the database using -reindex to " "go back to unpruned mode. This will redownload the " "entire blockchain"); break; } if (!ReplayBlocks(config, pcoinsdbview)) { strLoadError = _("Unable to replay blocks. You will need to rebuild " "the database using -reindex-chainstate."); break; } pcoinsTip = new CCoinsViewCache(pcoinscatcher); LoadChainTip(chainparams); if (!fReindex && chainActive.Tip() != nullptr) { uiInterface.InitMessage(_("Rewinding blocks...")); if (!RewindBlockIndex(config)) { strLoadError = _("Unable to rewind the database to a " "pre-fork state. You will need to " "redownload the blockchain"); break; } } uiInterface.InitMessage(_("Verifying blocks...")); if (fHavePruned && gArgs.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS) > MIN_BLOCKS_TO_KEEP) { LogPrintf("Prune: pruned datadir may not have more than %d " "blocks; only checking available blocks", MIN_BLOCKS_TO_KEEP); } { LOCK(cs_main); CBlockIndex *tip = chainActive.Tip(); RPCNotifyBlockChange(true, tip); if (tip && tip->nTime > GetAdjustedTime() + MAX_FUTURE_BLOCK_TIME) { strLoadError = _("The block database contains a block which " "appears to be from the future. " "This may be due to your computer's date and " "time being set incorrectly. " "Only rebuild the block database if you are sure " "that your computer's date and time are correct"); break; } } if (!CVerifyDB().VerifyDB( config, pcoinsdbview, gArgs.GetArg("-checklevel", DEFAULT_CHECKLEVEL), gArgs.GetArg("-checkblocks", DEFAULT_CHECKBLOCKS))) { strLoadError = _("Corrupted block database detected"); break; } } catch (const std::exception &e) { LogPrintf("%s\n", e.what()); strLoadError = _("Error opening block database"); break; } fLoaded = true; } while (false); if (!fLoaded && !fRequestShutdown) { // first suggest a reindex if (!fReset) { bool fRet = uiInterface.ThreadSafeQuestion( strLoadError + ".\n\n" + _("Do you want to rebuild the block database now?"), strLoadError + ".\nPlease restart with -reindex or " "-reindex-chainstate to recover.", "", CClientUIInterface::MSG_ERROR | CClientUIInterface::BTN_ABORT); if (fRet) { fReindex = true; fRequestShutdown = false; } else { LogPrintf("Aborted block database rebuild. Exiting.\n"); return false; } } else { return InitError(strLoadError); } } } // As LoadBlockIndex can take several minutes, it's possible the user // requested to kill the GUI during the last operation. If so, exit. // As the program has not fully started yet, Shutdown() is possibly // overkill. if (fRequestShutdown) { LogPrintf("Shutdown requested. Exiting.\n"); return false; } LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart); fs::path est_path = GetDataDir() / FEE_ESTIMATES_FILENAME; CAutoFile est_filein(fsbridge::fopen(est_path, "rb"), SER_DISK, CLIENT_VERSION); // Allowed to fail as this file IS missing on first startup. if (!est_filein.IsNull()) { mempool.ReadFeeEstimates(est_filein); } fFeeEstimatesInitialized = true; // Encoded addresses using cashaddr instead of base58 // Activates by default on Jan, 14 config.SetCashAddrEncoding( gArgs.GetBoolArg("-usecashaddr", GetAdjustedTime() > 1515900000)); // Step 8: load wallet #ifdef ENABLE_WALLET if (!CWallet::InitLoadWallet(chainparams)) { return false; } #else LogPrintf("No wallet support compiled in!\n"); #endif // Step 9: data directory maintenance // if pruning, unset the service bit and perform the initial blockstore // prune after any wallet rescanning has taken place. if (fPruneMode) { LogPrintf("Unsetting NODE_NETWORK on prune mode\n"); nLocalServices = ServiceFlags(nLocalServices & ~NODE_NETWORK); if (!fReindex) { uiInterface.InitMessage(_("Pruning blockstore...")); PruneAndFlush(); } } // Step 10: import blocks if (!CheckDiskSpace()) { return false; } // Either install a handler to notify us when genesis activates, or set // fHaveGenesis directly. // No locking, as this happens before any background thread is started. if (chainActive.Tip() == nullptr) { uiInterface.NotifyBlockTip.connect(BlockNotifyGenesisWait); } else { fHaveGenesis = true; } if (gArgs.IsArgSet("-blocknotify")) { uiInterface.NotifyBlockTip.connect(BlockNotifyCallback); } std::vector vImportFiles; if (gArgs.IsArgSet("-loadblock")) { for (const std::string &strFile : gArgs.GetArgs("-loadblock")) { vImportFiles.push_back(strFile); } } threadGroup.create_thread( boost::bind(&ThreadImport, std::ref(config), vImportFiles)); // Wait for genesis block to be processed { boost::unique_lock lock(cs_GenesisWait); while (!fHaveGenesis) { condvar_GenesisWait.wait(lock); } uiInterface.NotifyBlockTip.disconnect(BlockNotifyGenesisWait); } // Step 11: start node //// debug print LogPrintf("mapBlockIndex.size() = %u\n", mapBlockIndex.size()); LogPrintf("nBestHeight = %d\n", chainActive.Height()); if (gArgs.GetBoolArg("-listenonion", DEFAULT_LISTEN_ONION)) { StartTorControl(threadGroup, scheduler); } Discover(threadGroup); // Map ports with UPnP MapPort(gArgs.GetBoolArg("-upnp", DEFAULT_UPNP)); std::string strNodeError; CConnman::Options connOptions; connOptions.nLocalServices = nLocalServices; connOptions.nRelevantServices = nRelevantServices; connOptions.nMaxConnections = nMaxConnections; connOptions.nMaxOutbound = std::min(MAX_OUTBOUND_CONNECTIONS, connOptions.nMaxConnections); connOptions.nMaxAddnode = MAX_ADDNODE_CONNECTIONS; connOptions.nMaxFeeler = 1; connOptions.nBestHeight = chainActive.Height(); connOptions.uiInterface = &uiInterface; connOptions.nSendBufferMaxSize = 1000 * gArgs.GetArg("-maxsendbuffer", DEFAULT_MAXSENDBUFFER); connOptions.nReceiveFloodSize = 1000 * gArgs.GetArg("-maxreceivebuffer", DEFAULT_MAXRECEIVEBUFFER); connOptions.nMaxOutboundTimeframe = nMaxOutboundTimeframe; connOptions.nMaxOutboundLimit = nMaxOutboundLimit; if (!connman.Start(scheduler, strNodeError, connOptions)) { return InitError(strNodeError); } // Step 12: finished SetRPCWarmupFinished(); uiInterface.InitMessage(_("Done loading")); #ifdef ENABLE_WALLET for (CWalletRef pwallet : vpwallets) { pwallet->postInitProcess(scheduler); } #endif return !fRequestShutdown; }