diff --git a/doc/build-osx.md b/doc/build-osx.md index d4c438f107..06262dc2f8 100644 --- a/doc/build-osx.md +++ b/doc/build-osx.md @@ -1,91 +1,100 @@ macOS Build Instructions and Notes ==================================== The commands in this guide should be executed in a Terminal application. The built-in one is located in `/Applications/Utilities/Terminal.app`. Preparation ----------- 1. Install Xcode from the app store if you don't have it already (it's a dependency for qt5) 2. Install the macOS command line tools: `xcode-select --install` When the popup appears, click `Install`. 3. Install [Homebrew](https://brew.sh). Dependencies ---------------------- Install dependencies: brew install automake berkeley-db libtool boost miniupnpc openssl pkg-config protobuf python qt libevent qrencode See [dependencies.md](dependencies.md) for a complete overview. If you want to build the disk image with `make deploy` (.dmg / optional), you need RSVG brew install librsvg Build Bitcoin ABC ----------------- Before you start building, please make sure that your compiler supports C++14. 1. Clone the Bitcoin ABC source code and cd into `bitcoin-abc` git clone https://github.com/Bitcoin-ABC/bitcoin-abc.git cd bitcoin-abc 2. Build Bitcoin ABC: Configure and build the headless Bitcoin ABC binaries as well as the GUI (if Qt is found). You can disable the GUI build by passing `--without-gui` to configure. It is recommended to create a build directory to build out-of-tree. ./autogen.sh mkdir build cd build ../configure make 3. It is recommended to build and run the unit tests: make check 4. You can also create a .dmg that contains the .app bundle (optional): make deploy +Disable-wallet mode +-------------------- +When the intention is to run only a P2P node without a wallet, Bitcoin ABC may be compiled in +disable-wallet mode with: + + ./configure --disable-wallet + +Mining is also possible in disable-wallet mode using the `getblocktemplate` RPC call. + Running ------- Bitcoin ABC is now available at `./src/bitcoind` Before running, it's recommended that you create an RPC configuration file. echo -e "rpcuser=bitcoinrpc\nrpcpassword=$(xxd -l 16 -p /dev/urandom)" > "/Users/${USER}/Library/Application Support/Bitcoin/bitcoin.conf" chmod 600 "/Users/${USER}/Library/Application Support/Bitcoin/bitcoin.conf" The first time you run bitcoind, it will start downloading the blockchain. This process could take several hours. You can monitor the download process by looking at the debug.log file: tail -f $HOME/Library/Application\ Support/Bitcoin/debug.log Other commands: ------- ./src/bitcoind -daemon # Starts the bitcoin daemon. ./src/bitcoin-cli --help # Outputs a list of command-line options. ./src/bitcoin-cli help # Outputs a list of RPC commands when the daemon is running. Notes ----- * Building with downloaded Qt binaries is not officially supported. See the notes in [#7714](https://github.com/bitcoin/bitcoin/issues/7714) diff --git a/doc/build-unix.md b/doc/build-unix.md index 2178dc5ae6..d367c5169b 100644 --- a/doc/build-unix.md +++ b/doc/build-unix.md @@ -1,257 +1,256 @@ UNIX BUILD NOTES ==================== Some notes on how to build Bitcoin ABC in Unix. (For FreeBSD specific instructions, see `build-freebsd.md` in this directory.) Note --------------------- Always use absolute paths to configure and compile Bitcoin ABC and the dependencies, for example, when specifying the path of the dependency: ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX Here BDB_PREFIX must be an absolute path - it is defined using $(pwd) which ensures the usage of the absolute path. To Build --------------------- Before you start building, please make sure that your compiler supports C++14. It is recommended to create a build directory to build out-of-tree. ```bash ./autogen.sh mkdir build cd build ../configure make make install # optional ``` This will build bitcoin-qt as well if the dependencies are met. Dependencies --------------------- These dependencies are required: Library | Purpose | Description ------------|------------------|---------------------- libssl | Crypto | Random Number Generation, Elliptic Curve Cryptography libboost | Utility | Library for threading, data structures, etc libevent | Networking | OS independent asynchronous networking Optional dependencies: Library | Purpose | Description ------------|------------------|---------------------- miniupnpc | UPnP Support | Firewall-jumping support libdb | Berkeley DB | Wallet storage (only needed when wallet enabled) qt | GUI | GUI toolkit (only needed when GUI enabled) protobuf | Payments in GUI | Data interchange format used for payment protocol (only needed when GUI enabled) libqrencode | QR codes in GUI | Optional for generating QR codes (only needed when GUI enabled) univalue | Utility | JSON parsing and encoding (bundled version will be used unless --with-system-univalue passed to configure) libzmq3 | ZMQ notification | Optional, allows generating ZMQ notifications (requires ZMQ version >= 4.x) For the versions used, see [dependencies.md](dependencies.md) Memory Requirements -------------------- C++ compilers are memory-hungry. It is recommended to have at least 1.5 GB of memory available when compiling Bitcoin ABC. On systems with less, gcc can be tuned to conserve memory with additional CXXFLAGS: ./configure CXXFLAGS="--param ggc-min-expand=1 --param ggc-min-heapsize=32768" Dependency Build Instructions: Ubuntu & Debian ---------------------------------------------- Build requirements: sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils python3 Options when installing required Boost library files: 1. On at least Ubuntu 14.04+ and Debian 7+ there are generic names for the individual boost development packages, so the following can be used to only install necessary parts of boost: sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev 2. If that doesn't work, you can install all boost development packages with: sudo apt-get install libboost-all-dev BerkeleyDB 5.3 or later is required for the wallet. This can be installed with: sudo apt-get install libdb-dev libdb++-dev See the section "Disable-wallet mode" to build Bitcoin ABC without wallet. Optional (see --with-miniupnpc and --enable-upnp-default): sudo apt-get install libminiupnpc-dev ZMQ dependencies (provides ZMQ API 4.x): sudo apt-get install libzmq3-dev Dependencies for the GUI: Ubuntu & Debian ----------------------------------------- If you want to build bitcoin-qt, make sure that the required packages for Qt development are installed. Qt 5 is necessary to build the GUI. To build without GUI pass `--without-gui`. To build with Qt 5 you need the following: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libqrencode (optional) can be installed with: sudo apt-get install libqrencode-dev Once these are installed, they will be found by configure and a bitcoin-qt executable will be built by default. Dependency Build Instructions: Fedora ------------------------------------- Build requirements: sudo dnf install gcc-c++ libtool make autoconf automake openssl-devel libevent-devel boost-devel libdb-devel libdb-cxx-devel python3 Optional: sudo dnf install miniupnpc-devel To build with Qt 5 you need the following: sudo dnf install qt5-qttools-devel qt5-qtbase-devel protobuf-devel libqrencode (optional) can be installed with: sudo dnf install qrencode-devel Notes ----- The release is built with GCC and then "strip bitcoind" to strip the debug symbols, which reduces the executable size by about 90%. miniupnpc --------- [miniupnpc](http://miniupnp.free.fr/) may be used for UPnP port mapping. It can be downloaded from [here]( http://miniupnp.tuxfamily.org/files/). UPnP support is compiled in and turned off by default. See the configure options for upnp behavior desired: --without-miniupnpc No UPnP support miniupnp not required --disable-upnp-default (the default) UPnP support turned off by default at runtime --enable-upnp-default UPnP support turned on by default at runtime Boost ----- For documentation on building Boost look at their official documentation: http://www.boost.org/build/doc/html/bbv2/installation.html Security -------- To help make your Bitcoin ABC installation more secure by making certain attacks impossible to exploit even if a vulnerability is found, binaries are hardened by default. This can be disabled with: Hardening Flags: ./configure --enable-hardening ./configure --disable-hardening Hardening enables the following features: * Position Independent Executable Build position independent code to take advantage of Address Space Layout Randomization offered by some kernels. Attackers who can cause execution of code at an arbitrary memory location are thwarted if they don't know where anything useful is located. The stack and heap are randomly located by default, but this allows the code section to be randomly located as well. On an AMD64 processor where a library was not compiled with -fPIC, this will cause an error such as: "relocation R_X86_64_32 against `......' can not be used when making a shared object;" To test that you have built PIE executable, install scanelf, part of paxutils, and use: scanelf -e ./bitcoin The output should contain: TYPE ET_DYN * Non-executable Stack If the stack is executable then trivial stack-based buffer overflow exploits are possible if vulnerable buffers are found. By default, Bitcoin ABC should be built with a non-executable stack, but if one of the libraries it uses asks for an executable stack or someone makes a mistake and uses a compiler extension which requires an executable stack, it will silently build an executable without the non-executable stack protection. To verify that the stack is non-executable after compiling use: `scanelf -e ./bitcoin` The output should contain: STK/REL/PTL RW- R-- RW- The STK RW- means that the stack is readable and writeable but not executable. Disable-wallet mode -------------------- When the intention is to run only a P2P node without a wallet, Bitcoin ABC may be compiled in disable-wallet mode with: ./configure --disable-wallet -Mining is also possible in disable-wallet mode, but only using the `getblocktemplate` RPC -call not `getwork`. +Mining is also possible in disable-wallet mode using the `getblocktemplate` RPC call. Additional Configure Flags -------------------------- A list of additional configure flags can be displayed with: ./configure --help Setup and Build Example: Arch Linux ----------------------------------- This example lists the steps necessary to setup and build a command line only, non-wallet distribution of the latest changes on Arch Linux: pacman -S git base-devel boost libevent python git clone https://github.com/Bitcoin-ABC/bitcoin-abc.git cd bitcoin-abc/ ./autogen.sh ./configure --disable-wallet --without-gui --without-miniupnpc make check ARM Cross-compilation ------------------- These steps can be performed on, for example, an Ubuntu VM. The depends system will also work on other Linux distributions, however the commands for installing the toolchain will be different. Make sure you install the build requirements mentioned above. Then, install the toolchain and curl: sudo apt-get install g++-arm-linux-gnueabihf curl To build executables for ARM: cd depends make HOST=arm-linux-gnueabihf NO_QT=1 cd .. ./configure --prefix=$PWD/depends/arm-linux-gnueabihf --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++ make For further documentation on the depends system see [README.md](../depends/README.md) in the depends directory.